forum

I think you have installed Raspberry Pi OS Lite x64 Bookworm. If yes, please read this topic: https://forum.z-wave.me/viewtopic.php?f=3419&t=35967. If it helps you, please write feedback "

2023-11-17_18-12.png I found another problem, now UART is disabled by default during installation (there is no device /dev/ttyAMA0) to fix this, run this command: f=/boot/config.txt; u="enable_uart=1"; grep -q "^$u$" $f || (sudo sed -i "/^enable_uart/d" $f; echo $u | s...

Installing Z-Way Server on Raspberry Pi Installing a Z-Way server on a Raspberry Pi is the recommended way to work with this software, in addition to the Raspberry Pi itself. You will also need a Z-Wave interface to communicate our future controller with other Z-Wave devices. For this configuration...

Hello, the problem is known and it is unfortunately on the device side, the difference between 3.2.3 and the current version is that the passage of the interview has become more strict To fix this problem, simply run the command replacing the IP and device ID http://IP:8083/JS/Run/zway.InjectPacket(...

Thank you for asking your question, let's go in order and start with the interview. Tell me do you have this problem occurs only on 1 battery-powered device or are there more such problematic ones? Also tell me do you have such a thermostat in the first screenshot? 010101-Heizkoerperthermostat.jpg W...

Use this command to install this version of the z-way package. You can replace the contents of PKG= with another version

Hello, I confirm the problem. Apparently, there have been some changes in version 2023.6.2 that break the switchMultilevel controls. We will solve this problem as soon as possible, but for now I can recommend rolling back to the version using this command in the home assistant terminal: ha core upda...

Взял Z-Uno 2, залил бета загрузчик Z-Uno 2, вставил скетч без правок и зашил, в итоге устройство добавилось в сеть исправно и все элементы сгенерировались https://i.imgur.com/w7LfWjH.png Возможно вы использовали в Arduino IDE плату первой Z-Uno? Вот статья в которой расказывается как установить плат...

Если скетч есть, то можно перепрошить Z-Uno на более свежий загрузчик и передобавить в сеть, с большой вероятностью это решит проблему

Добрый день, я рекомендую связаться с инсталляторами и выяснить есть ли у них скетч или нет.
Подскажите в ExpertUI ваша Z-Uno она находится как мёртвое устройство или нет?