On your Raspberry Pi you'll find the logs here:
Code: Select all
/var/log/z-way-server.log
standard mode is heat/comfort1. Frost Protection: The temperature in the room will be regulated to about 6 °C.
2. Comfort: The temperature in the room will be regulated to a comfortable level. On factory default this is 22 °C but the value can be adjusted by the respective Z-Wave command 'Thermostat Setpoint' to a
value between 0 °C and 50 °C. This mode is active on factory default.
3. Energy Saving: The temperature in the room will be regulated to a energy saving level. On factory
default this is 18 °C but the value can be adjusted by the respective Z-Wave command 'Thermostat
Setpoint' to a value between 0 °C and 50 °C.
4. Direct Valve Control: This mode allows the direct control of the valve as percentage value of
opening using the Z-Wave command class 'Switch Multilevel'. The regulation of a temperature within the device is deactivated.
Frost Protection: BASIC SET 0x01, THERMOSTAT MODE SET 0x00
Energy Saving: BASIC SET 0x00, THERMOSTAT MODE SET 0x0b
Comfort: BASIC SET 0xff, THERMOSTAT MODE SET 0x01
Direct Control: BASIC SET 0xfe, THERMOSTAT MODE SET 0x1f
Code: Select all
[2015-09-20 22:38:12.011] [I] [core] Creating device switchMultilevel ZWayVDev_zway_11-0-38
[2015-09-20 22:38:12.018] [I] [core] HK: added ZWayVDev_zway_11-0-38
[2015-09-20 22:38:12.027] [I] [core] HK: updated level on ZWayVDev_zway_11-0-38
[2015-09-20 22:38:12.028] [I] [core] Notification: device-info (device-status): {"dev":"Wohnzimmer Ventil","l":"8%"}
[2015-09-20 22:38:12.039] [I] [core] Creating device sensorMultilevel ZWayVDev_zway_11-0-49-1
[2015-09-20 22:38:12.046] [I] [core] HK: added ZWayVDev_zway_11-0-49-1
[2015-09-20 22:38:12.052] [I] [core] HK: updated level on ZWayVDev_zway_11-0-49-1
[2015-09-20 22:38:12.054] [I] [core] Notification: device-info (device-temperature): {"dev":"Wohnzimmer Temperatur","l":"22 °C"}
[2015-09-20 22:38:12.065] [I] [core] Creating device switchBinary ZWayVDev_zway_11-0-64
[2015-09-20 22:38:12.076] [I] [core] HK: added ZWayVDev_zway_11-0-64
[2015-09-20 22:38:12.083] [I] [core] HK: updated level on ZWayVDev_zway_11-0-64
[2015-09-20 22:38:12.087] [I] [core] Notification: device-info (device-OnOff): {"dev":"Wohnzimmer Einstellung","l":"on"}
[2015-09-20 22:38:12.097] [I] [core] Creating device thermostat ZWayVDev_zway_11-0-67-1
[2015-09-20 22:38:12.104] [I] [core] HK: added ZWayVDev_zway_11-0-67-1
[2015-09-20 22:38:12.121] [I] [core] Creating device battery ZWayVDev_zway_11-0-128
Code: Select all
[2015-09-22 02:25:01.271] [I] [core] --- histories polled
[2015-09-22 02:25:09.624] [E] [RaZberry] Callback execution error: ReferenceError: parseInfinfo is not defined
at HKCharacteristic.m.zwaveOpenWeather.service.addCharacteristic.get (automation/modules/HomeKitGate/index.js:211:36)
at HKCharacteristic.Object.defineProperty.get [as value] (zway/homekit:403:37)
at HKCharacteristic.serialize (zway/homekit:437:32)
at zway/homekit:311:40
at Array.forEach (native)
at HKService.serialize (zway/homekit:310:26)
at zway/homekit:255:35
at Array.forEach (native)
at HKAccessory.serialize (zway/homekit:254:19)
at zway/homekit:167:39
I'm using Eve and it works fine wiht Razberry.AlphaX2 wrote:A short question, which App are you using? I've tried with "Eve" from Elgato. But it tells me, that it can't work with RaZberry? So I tried some other apps, but got nothing to work with HomeKit App in Z-Way.
Thanks!