pofs wrote:There's no any specific driver for RaZberry, it uses a built-in serial port driver.
It must be something to do with your Linux distrib, probably you should upgrade to the latest version.
Okay, and you haven't seen this problem before?
I'm running Domoticz, I'll try theirs forum again.
2015-03-01 16:09:52.983 Error, ERROR: Cannot open serial port /dev/ttyUSB0. Error code 2
2015-03-01 16:09:52.983 Error, ERROR: Failed to open serial port /dev/ttyUSB0
I didn't have any problem having both the tellstick and the Razberry on the same Pi or Pi 2.
My z-way-server is using /dev/ttyAMA0 for Razberry on Pi 2.
With a 2.1A I didn't have power problems running the Tellstick on the USB port of the Pi2. (But the power supply itself turned out wonky, so now the Pi 2 is on the old 0.5A.)
LOCOSP wrote:Is it possible to control tellstick via razberry?
Because i have both devices but would be great to controll both via z-wave.me UI
No you have to have tellstick usb/network device. ( far as I know )
I understand that, I have tellstick, but is it possible to control it with SmartHome UI and apps ?
I'm running Domoticz on my raspberryPI with a razberry board and a tellstick. Works great. But you may need to buy a USB hub. I have the official USB hub for raspberry pi.