Hi,
I have a problem with an FGRM-222 module.
I have added it OK and the interview completed successfully.
The device is recognised but it is missing the multilevel switch command class.
I have checked the ZDDX file (492-010f-0301-1001-03-03-34-16-16.xml) and it is missing the command class in this file.
I have edited the file so the command classes match what is retrieved in CreateZDDX.
I then ran /opt/z-way-server/ZDDX $ python ./MakeIndex.py.
This hasn't made any difference when interviewing the device.
I have also tried removing and re-adding it.
I can access the command class (0x26) from the ZWaveApi so I know it's working.
How do I get this command class added as part of the virtual device?
Thanks
Missing Command Class for FGRM-222
Re: Missing Command Class for FGRM-222
As I remember, it has to calibrate itself to preset SwitchMultilevel
Re: Missing Command Class for FGRM-222
Thanks for the suggestion.
I have tried running a calibration and nothing appears to have changed.
I've noticed something in the ZDDX file.
What does Supported refer to?
Whatever is causing this problem appears to be with the interview process as I can use the multilevel switch from the ZWaveAPI. I would like to use this with the devices API though
This stops the motor half way
http://ip:8083/ZWaveAPI/Run/devices[5]. ... 6].Set(50).
Any thoughts?
Thanks.
I have tried running a calibration and nothing appears to have changed.
I've noticed something in the ZDDX file.
Code: Select all
<commandClasses>
<commandClass id="0020" version="1" supported="true" controlled="false" secure="false" inNIF="false"/>
<commandClass id="0025" version="1" supported="true" controlled="true" secure="false" inNIF="true"/>
<commandClass id="0031" version="2" supported="true" controlled="true" secure="false" inNIF="true"/>
<commandClass id="0032" version="2" supported="true" controlled="true" secure="false" inNIF="true"/>
<commandClass id="0070" version="1" supported="true" controlled="false" secure="false" inNIF="true"/>
<commandClass id="0072" version="1" supported="true" controlled="false" secure="false" inNIF="true"/>
<commandClass id="0073" version="1" supported="true" controlled="false" secure="false" inNIF="true"/>
<commandClass id="0075" version="2" supported="true" controlled="false" secure="false" inNIF="true"/>
<commandClass id="007a" version="1" supported="true" controlled="false" secure="false" inNIF="true"/>
<commandClass id="0085" version="2" supported="true" controlled="false" secure="false" inNIF="true"/>
<commandClass id="0086" version="1" supported="true" controlled="false" secure="false" inNIF="true"/>
<commandClass id="0026" version="1" supported="false" controlled="true" secure="false" inNIF="true"/>
<commandClass id="002b" version="1" supported="false" controlled="true" secure="false" inNIF="true"/>
<commandClass id="0091" version="1" supported="true" controlled="true" secure="false" inNIF="true"/>
<commandClass id="0091" version="1" supported="true" controlled="true" secure="false" inNIF="true"/>
</commandClasses>
Whatever is causing this problem appears to be with the interview process as I can use the multilevel switch from the ZWaveAPI. I would like to use this with the devices API though
This stops the motor half way
http://ip:8083/ZWaveAPI/Run/devices[5]. ... 6].Set(50).
Any thoughts?
Thanks.
Re: Missing Command Class for FGRM-222
You might need to press Request NIF and then Force interview