Define ZUNO Channel

Discussion about Z-Uno product. Visit http://z-uno.z-wave.me for more details.
Black Cat
Posts: 41
Joined: 02 Mar 2016 00:52

Re: Define ZUNO Channel

Post by Black Cat » 01 Jul 2017 04:05

I checked the following PINOUTS (17 to 23) with all interfering with another Binary Switch (2,3 or 4)

Then I changed the PINOUT'S to 8 to 5, the result that the sketch and UI now works as intended.

Can anyone explain why there is interference on PINS 17 to 23 or are those PINS reserved for other uses, if so what is the use?

Otherwise, I'm one happy chappy with this and thanks to everyone who helped me with my first project in C.
Now to add momentary switching option to this.

A.Harrenberg
Posts: 200
Joined: 05 Sep 2016 22:27

Re: Define ZUNO Channel

Post by A.Harrenberg » 01 Jul 2017 12:35

Hi,
Black Cat wrote:
28 Jun 2017 23:31
Thanks, but why would I make or need an association?

This is not controlling another device. It is the device, I just need to have the UI indicate correctly. MAybe I have missed something or not understanding a principle?
yes, my mistake, you are right! The zunoSendReport() always send to the controller...

Code: Select all

Instruct Z-Uno to send an unsolicited report to the controller.
In you last post you mention "pin 17", did you mean "pin 18"? In the code you are not using pin 17...
It might be that the pin 18 also be used as input for INT 1 interfere with the usage as a button. You can try using 19/20/21/22 instead.

I have 3 Z-Unos and use a different controller, but unfortunately I can't test it at the moment.

Regards,
Andreas.
fhem.de - ZWave development support

Black Cat
Posts: 41
Joined: 02 Mar 2016 00:52

Re: Define ZUNO Channel

Post by Black Cat » 03 Jul 2017 00:45

There are different code revisions, each one had different PIN OUTS, the last sketch with published code was an earlier version, since then it has undergone many revisions.

The code works and I'm happy to work forward from here, Next is to design a PCB with onboard power supply (240VAC to 5VDC).

A.Harrenberg
Posts: 200
Joined: 05 Sep 2016 22:27

Re: Define ZUNO Channel

Post by A.Harrenberg » 03 Jul 2017 08:44

Ok,

good to hear that it is working now! Was the problem related to the INT Pin?

Regards,
Andreas.
fhem.de - ZWave development support

Black Cat
Posts: 41
Joined: 02 Mar 2016 00:52

Re: Define ZUNO Channel

Post by Black Cat » 04 Jul 2017 05:41

The INT1 and INT2 must be the problem.

User avatar
PoltoS
Posts: 3450
Joined: 26 Jan 2011 19:36

Re: Define ZUNO Channel

Post by PoltoS » 14 Jul 2017 00:21

Can you send us by mail a sketch that works and another one that do not and we test them again. And a clear description what do you do in your test to reveal the issue.

Can you test same non-working skech in Z-Way instead of Vera and HS? If you can reproduce it with Z-Way too, please send us the log from the test.

Black Cat
Posts: 41
Joined: 02 Mar 2016 00:52

Re: Define ZUNO Channel

Post by Black Cat » 15 Jul 2017 08:11

Sent working version of 4 & not working version of 6 channel.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest