Hi,
I have major difficulties to store configuration to devices like an "Aeotec Siren Gen 5 EU" for instance. The Z-Wave Expert interface constantly states:
Nº 1 - Siren Sound/Volume: Value was changed to Set the volume to 100 dB but not stored in device yet.
Device interview and type is set correctly. It is no battery device.
Related: A battery device have to be woken up, but how to do this? I can not find something like this in the interface.
Z-Wave version:
Firmware version v2.2.2
UI version 1.4.0
Capabilities: Slm
Configuration not stored to device
Re: Configuration not stored to device
I've had the same problem with other devices. It usually works by setting the param to something else, and then set it back to the desired value. Probably a bug in the interface.
The device should have a button you can press, which then wakes it up. You can't do that from the UI.
The device should have a button you can press, which then wakes it up. You can't do that from the UI.
Re: Configuration not stored to device
I have the impression there is something broken in this specific device. I have contacted Aeotec for support in this case. Will keep informed here.
Re: Configuration not stored to device
I have exactly the same problem with this Siren. Any updates @_Thomas_?_Thomas_ wrote:I have the impression there is something broken in this specific device. I have contacted Aeotec for support in this case. Will keep informed here.