Hi,
try to combine 1 Secure SRT321 and >=2 Danfoss LC13 together with razberry and z-way (v2.2.2) in order to use the srt321 as a kind of remote control for the at lest 2 Danfoss living connects beside the web gui of z-way. The aim is to use both the z-way web GUI and the srt321 alternatively to adjust the temperature setpoint on the lc13's.
I've seen and tried to play around (with 1 lc13 only) with the solution in https://forum.z-wave.me/viewtopic.php?f=3423&t=20718.
But no success, creating an app via "Load custom JavaScript" ends in: "Something went wrong".
Can somebody help with a working solution?
combine srt321 and lc13
Re: combine srt321 and lc13
Hi,
coming back on this issue, hoping, anybody can help:
Did now try to bind Danfoss LC13's to the SRT321 via api (following hints in https://forum.z-wave.me/viewtopic.php?f=3423&t=20718):
http://IP:8083/JS/Run/zway.devices[33]. ... oint.Set(1, this.value);});
http://IP:8083/JS/Run/zway.devices[33]. ... oint.Set(1, this.value);});
where device[33] is the SRT while device[10] and [11] are the LC13's.
Did work for a while, but somehow broke.
Changing the Temperature at SRT results in an Event: "Error during perform command execution: Error: Invalid argument".
Does anybody have an idea? Has anybody such a combination up and running and if, then how?
Would be even better, to have this kind of "Master-Slave-Thermostat" as an app. Can anybody help with this?
Any hint is appreciated...
coming back on this issue, hoping, anybody can help:
Did now try to bind Danfoss LC13's to the SRT321 via api (following hints in https://forum.z-wave.me/viewtopic.php?f=3423&t=20718):
http://IP:8083/JS/Run/zway.devices[33]. ... oint.Set(1, this.value);});
http://IP:8083/JS/Run/zway.devices[33]. ... oint.Set(1, this.value);});
where device[33] is the SRT while device[10] and [11] are the LC13's.
Did work for a while, but somehow broke.
Changing the Temperature at SRT results in an Event: "Error during perform command execution: Error: Invalid argument".
Does anybody have an idea? Has anybody such a combination up and running and if, then how?
Would be even better, to have this kind of "Master-Slave-Thermostat" as an app. Can anybody help with this?
Any hint is appreciated...
Re: combine srt321 and lc13
Hi,
I would also like to control the SetPoint of the LC13 with the buttons of my room temperature sensor. But Currently I am trying to setup just 1:1 binding.
I am not a JavaScript guru but have you tried to use multiple function() in a single bind? Something like this:
http://IP:8083/JS/Run/zway.devices[33]. ... alue);} );
May be some ";" is mising there but I guess it could be valid javascript. Or may be encapsulating both functions in another function like:
http://IP:8083/JS/Run/zway.devices[33]. ... lue);}} );
But I am only guessing
Regards
I would also like to control the SetPoint of the LC13 with the buttons of my room temperature sensor. But Currently I am trying to setup just 1:1 binding.
I am not a JavaScript guru but have you tried to use multiple function() in a single bind? Something like this:
http://IP:8083/JS/Run/zway.devices[33]. ... alue);} );
May be some ";" is mising there but I guess it could be valid javascript. Or may be encapsulating both functions in another function like:
http://IP:8083/JS/Run/zway.devices[33]. ... lue);}} );
But I am only guessing
![Wink ;)](./images/smilies/icon_e_wink.gif)
Regards
Re: combine srt321 and lc13
Just for the records: Meanwhile I discovered the Association app, which does the magic...
Re: combine srt321 and lc13
Hi!
Know this is an old thread, but could you possibly give more details on how you got the Danfoss Thermostats setup?
I have a Danfoss living connect thermostat, which I can connect to, do interview, see link status - but association does not work, so I cant use it...
I get the following message in UI Expert:
"Can not configure associations: groups were not reported by the device. Do interview."
I have done interview, and got reply from the thermostat, but it doesnt help me much...
Best regards,
Mogens
Know this is an old thread, but could you possibly give more details on how you got the Danfoss Thermostats setup?
I have a Danfoss living connect thermostat, which I can connect to, do interview, see link status - but association does not work, so I cant use it...
I get the following message in UI Expert:
"Can not configure associations: groups were not reported by the device. Do interview."
I have done interview, and got reply from the thermostat, but it doesnt help me much...
Best regards,
Mogens