Купил Razberry 2, поставил на RPi 3 model B c Stretch, установил z-way c
Code: Select all
wget -q -O - razberry.z-wave.me/install | sudo bash
Code: Select all
support.z-wave.eu/libs
Не заработало:
Code: Select all
pi@raspberrypi:~ $ tail -n 30 /var/log/z-way-server.log
[2018-05-04 13:00:31.711] [D] [zway] [55] "RFPowerLevelGet"
[2018-05-04 13:00:31.711] [D] [zway] [56] "SendTestFrame"
[2018-05-04 13:00:31.711] [D] [zway] [57] "SetPromiscuousMode"
[2018-05-04 13:00:31.711] [D] [zway] [58] "PromiscuousCommandHandler"
[2018-05-04 13:00:31.711] [D] [zway] [59] "WatchDogStart"
[2018-05-04 13:00:31.711] [D] [zway] [60] "WatchDogStop"
[2018-05-04 13:00:31.711] [D] [zway] [61] "ZMEFreqChange"
[2018-05-04 13:00:31.712] [D] [zway] [62] "ZMERestore"
[2018-05-04 13:00:31.712] [D] [zway] [63] "ZMEBootloaderFlash"
[2018-05-04 13:00:31.712] [D] [zway] [64] "ZMECapabilities"
[2018-05-04 13:00:31.712] [D] [zway] Opened device: /dev/ttyAMA0
[2018-05-04 13:00:31.712] [D] [zway] Worker thread successfully created
[2018-05-04 13:00:31.712] [D] [zway] Worker thread entry point
[2018-05-04 13:00:31.712] [I] [zway] Adding job: Get controller info and supported function classes
[2018-05-04 13:00:31.722] [D] [zway] SENDING: ( 01 03 00 07 FB )
[2018-05-04 13:00:31.924] [I] [zway] Job 0x07 (Get controller info and supported function classes): No ACK received before timeout
[2018-05-04 13:00:31.924] [D] [zway] SENDING: ( 01 03 00 07 FB )
[2018-05-04 13:00:32.125] [I] [zway] Job 0x07 (Get controller info and supported function classes): No ACK received before timeout
[2018-05-04 13:00:32.125] [D] [zway] SENDING: ( 01 03 00 07 FB )
[2018-05-04 13:00:32.327] [I] [zway] Job 0x07 (Get controller info and supported function classes): No ACK received before timeout
[2018-05-04 13:00:32.327] [W] [zway] Job 0x07 (Get controller info and supported function classes) dropped: too many resends
[2018-05-04 13:00:32.327] [D] [zway] Job 0x07 (Get controller info and supported function classes): fail
[2018-05-04 13:00:32.327] [C] [zway] Get Serial API Capabilities returned zero.
[2018-05-04 13:00:32.327] [I] [zway] Removing job: Get controller info and supported function classes
[2018-05-04 13:00:32.337] [D] [zway] Worker thread exit point
[2018-05-04 13:00:32.337] [D] [zway] Worker thread successfully finished
[2018-05-04 13:00:32.348] [E] [zway] SaveData will not save data since it wasn't loaded. This is to prevent data loss.
[2018-05-04 13:00:32.367] [I] [core] Error: Bad data - communication failed
[2018-05-04 13:00:32.368] [I] [core] Tried 5 times without success. Stopping tries.
[2018-05-04 13:00:32.371] [I] [core] Notification: critical (z-wave): Cannot start Z-Wave binding: Error: Bad data - communication failed
pi@raspberrypi:~ $
При нажатии кнопки ребута не происходит вообще ничего, диод не моргает.
Что делать-то? Сдаваться? Ругаться с продавцом на ибее? Менять?
Попробовать всё-таки Jessie?