UZB Firmware Update from 5.07 to 5.27 fails

Discussions about Z-Way software and Z-Wave technology in general
JoNNo
Posts: 4
Joined: 07 Sep 2018 18:58

Re: UZB Firmware Update from 5.07 to 5.27 fails

Post by JoNNo » 07 Sep 2018 19:06

I have the same issue as rafale77 had, I'm on firmware version 5.23 with firmware upgrade page only showing bootloader 40196 as the only available option and it constantly fails with the following message "Unable to update data. /ZWave.zway/ZMEBootloaderUpgrade"

I have the same log output as rafale77 had:

[2018-09-07 16:02:57.772] [D] [zway] SENDING: ( 01 04 00 F4 06 09 )
[2018-09-07 16:02:57.782] [D] [zway] RECEIVED ACK
[2018-09-07 16:02:58.997] [D] [zway] RECEIVED: ( 01 04 01 F4 01 0F )
[2018-09-07 16:02:58.997] [D] [zway] SENT ACK
[2018-09-07 16:02:58.997] [zway] Job 0xf4 (Start reflashing bootloader of Z-Wave.Me firmware for 5th generation Z-Wave chip): Wrong checksum
[2018-09-07 16:02:58.997] [D] [zway] Job 0xf4 (Start reflashing bootloader of Z-Wave.Me firmware for 5th generation Z-Wave chip): fail
[2018-09-07 16:02:58.997] [zway] Removing job: Start reflashing bootloader of Z-Wave.Me firmware for 5th generation Z-Wave chip

I'm with version 2.3.8-rc6 of Z-Way on Stretch, I also tried 2.3.7 on Jessie but had the same issue.
Any idea how to resolve this?

User avatar
PoltoS
Posts: 4224
Joined: 26 Jan 2011 19:36

Re: UZB Firmware Update from 5.07 to 5.27 fails

Post by PoltoS » 09 Sep 2018 02:56

Wrong checksum means the file is corrupted or do not fit this version of the firmware.

Please show us your current firmware CRC, bootloader CRC (both in Controller Info page, show controller data) and version of the f/w. In addition we need to know the data sent by the browser (enable debug mode Ctrl+Shift+J and show us the link and URL to the firmware)

JoNNo
Posts: 4
Joined: 07 Sep 2018 18:58

Re: UZB Firmware Update from 5.07 to 5.27 fails

Post by JoNNo » 09 Sep 2018 08:29

FirmwareCRC: 2252 (05:18)
BootloaderCRC: 34603 (05:18)
APIVersion: 05.23 (05:18)
APIVersionMajor: 5 (05:18)
APIVersionMinor: 23 (05:18)

URL as taken from Fiddler: https://service.z-wave.me/expertui/uzb/ ... rCRC=34603

schreibubi
Posts: 3
Joined: 29 Apr 2018 17:31

Re: UZB Firmware Update from 5.07 to 5.27 fails

Post by schreibubi » 09 Sep 2018 19:05

Using 2.3.8-rc5 I was finally able to upgrade to 5.27.

Thanks,

Joerg

JoNNo
Posts: 4
Joined: 07 Sep 2018 18:58

Re: UZB Firmware Update from 5.07 to 5.27 fails

Post by JoNNo » 12 Sep 2018 20:17

I tried 2.3.7, 2.3.8-rc4, rc5 and rc6, same checksum error on all of them.

User avatar
PoltoS
Posts: 4224
Joined: 26 Jan 2011 19:36

Re: UZB Firmware Update from 5.07 to 5.27 fails

Post by PoltoS » 14 Sep 2018 11:37

@JoNNo What is your controller?

JoNNo
Posts: 4
Joined: 07 Sep 2018 18:58

Re: UZB Firmware Update from 5.07 to 5.27 fails

Post by JoNNo » 14 Sep 2018 13:04

ZME-UZB1 with Raspberry PI 3

Post Reply