forum

Alright, I got my network restored and can be a little more specific... Go into the configuration for the device you are trying to configure, and click on "expert commands." Somewhere in that list should be an option labeled "Configuration." Set the parameter #, the value you wan...

Sorry about the delayed response... I looked at mine, and the option is under configuration->expert commands. If you scroll through the list there should be an option for generic setting/getting of parameters. If you put in the parameter and the desired value (and I think the parameter type. i.e. 1 ...

If you go into the expert U.I., then to the configuration menu, and then select the device you want to set the configuration for theres an expert or advanced option which will show a list of all the options. It's not the list that has everything named (there's another list of parameters). I'm sorry,...

I've been out for a while doing some home remodeling and during the course had to reset my razberry. My setup has been to use the razberry as a secondary controller which has worked great for quite a long time. My issue is since the raz was a secondary and it had to be reset (for some reason it lost...

Yes There is. If you put the razberry into "Learn Mode" (found in the expert u.i. under network->control) and then go to your existing controller and set it to inclusion mode it should pick up the razberry and transmit a copy of the z-wave network to the razberry. It takes it a minute to g...

If it's running ubuntu you can just download the ubuntu package, export the z-way library and start the z-way server. If that works just fine (and it should) you can just add a script to your etc/init.d folder to start and stop the server as a service. There may even be a script already for that, bu...

I can try, but I have not had enough time to watch logs as events happen to give a 100% sure explanation of what is going on. It seems as though alarms from devices aren't immediately caught by the z-way ui. From messing with the devices I have that will broadcast alarms it seems as though when an a...

It's good to know it works in 1.7.2. Hopefully that means it will get fixed quickly. Just like Rappo this was a deal killer for me and the razberry. The reason I started my z-wave network was to get an alarm if my sump pump water level got too high and the sump pump didn't turn on. Sadly I had to bu...

The routing table is how devices communicate with each other, and not the device status. When you say off, do you mean off at the switch, or off at the breaker? If it's been connected and you turn it off at the breaker you can re-run the routing table so that everything shows the connection to it as...

I don't know this for sure it's just a guess, but it seems like there might be issues with sensors at the moment, and/or the device is battery powered and it's still not waking even though it should to update (or both). Recently I was playing with a water sensor and noticed the u.i. would do nothing...