forum

hi, ZUNO2 3.0.10 excluded several times, to be sure new config can be applied this minimal example, taken from reference, does not work - interview stops on multichannel, device logs 53181INCOMING SRC_ID:1.0 DST_ID:8192.0 KEY:1 OPTS:0 DATA:60 07 N_CH=1 **** Can't find channel for last cmd! as this c...

This is the log from a momemt of activating the scene to the momemnt where everything settles down. It's a test system, so there should be no garbage in log. The scene triggers switches off, switches 9.3, 9.6 and 9.9 were not turned off. If you need more info, please let me know. Thank you. Update: ...

Z-Uno 2 3.0.8 and 3.0.9beta Z-Way v4.0.0-102-g45c41aa6 Razbery 7 Pro 7.28 I have sketch with 10 switches, S2 security. I've tried getter/setter and also dynamic style. I have reuploaded sketch/excluded-included Z-Uno few times, between tests. If i send all 10 commands at once i.e. via scene at some ...

Are you referring zniffer trace from Silicon Labs software or log with high verbosity level from z-way-server?

So, PoltoS was kind enough to provide me with firmware 7.17. I can confirm that it work good enough, that I can use it on "production". There are still some problems - I will update in this thread in couple of days.

I can confirm that RaZbery 7 Pro with firmware 7.16 is totally unusable (with ~40 devices). Even when reporting from nodes is very rare. It gets into this weird state, where it fails to send any packet. I hope Silabs can fix this. On the other side, I also tried Aeotec Multi Sensor 7 (700 series) wi...

Z-Uno bootloader version:2.1.7 Security:S2 Frequency:EU Device included:yes Device included securely by controller:yes Controller:RaZberry 5.39/Z-Way 3.2.0 Devel system - only controller and Z-Uno in network Hi, I have this situation, I've made 10 switches with ZUNO_SETUP_CHANNELS(ZUNO_SWITCH_BINARY...

So... I will tell you a joke, that is unfunny AF. As I am having problems with this FIBARO module, I've found this thread in official FIBARO forum https://forum.fibaro.com/topic/49893-controller-reacts-way-to-slow-on-next-commands-if-internal-dimming-is-activated/ So the module fades between RGBW co...

Hi PoltoS, I would normally do exclude device -> Include device and the problem was persisting but when I did exclude device -> restart Z-Way -> includedevice the problem is solved. But the real problem is elswhere - please taka a look at https://forum.z-wave.me/viewtopic.php?f=3419&t=34343 I ha...

Hi, I use Qubino RGBW modules but they are really low quality - 2 out of 5 died on me. So I decided to try FIBARO, they manufacture IMHO good modules and they support S2. I use it in network with 45 devices, but it is almost unusable, commands are slow and after 24h or so device stops responding. I ...