forum

I notice one thing... I have set different times for each TRV. For eg. Room1: 7.00-22.00; Room2: 7.01-22.01, Room3 7.02-22.02 etc etc before all TRVs was set at 22:00 and many times it was something like it: set 19C, one minute later 20C, one minute later 19C, few minutes later 20C and it stay at 20...

I did make some changes in Heating app (try to change frost protection from 6 to 8 degree) by modify index.js file (of course I saved an _old version :)) but nothing did change... Do I need to "re-install" app in Z-Wave Smart Home? edit ok, I did work in wrong folder (modules). I change Fr...

Hello
how can I modify installed app code (ClimateControl)? I want to change one value in code but I don't know how to reach it

1. Possibility to define Frost temperature (like it is for comfort and saving temp.) because right now it is not possible to use this function with Eurotronic Spirit TRV
2. Extend scale of temperature set to 28C (right now max. is 27)

Thank You

enbemokel wrote: ↑

30 Jan 2019 18:04

I assume that a 3 Dbi antenna has less benefit
then using the default antenna......

from my experience I need to say no how I wrote before, better timing, more device in the range (two devices now is connected direct to Razberry), chart on the background noise is more "flat"

I've got that antenna (~2,5€+1,9€)

https://sklep.balticad.eu/ba-868-f4020- ... 115mm-3dbi
+
https://sklep.balticad.eu/pigtail-u-fl-f-katowy-sma-f-2

This a Razberry2 EU board. Official version of what? modification - no (I'm waiting for official manual), board - it is official version.
I don't know what is technical different between this two boards...but on the first look I would say - colour

sorry for the size of the image but it must be readable... so I had "few" free minutes (with 6month daughter it is not so easy ;)) I found my old ERSA soldering station and I did solder the u.fl socket and also You need to un-solder 0ohm resistor R3 and solder to R4 pads (or just make a ti...

Any help, advise?

in manual there is only about breaking pcb antenna, but on internet You can find something about unsoldering resistor somewhere else about inductor so it is not clear.