A few notes:
The UZB is the proper one for my region, and it's properly set via Z-Way as well.
I have tried exclusion mode, always first, followed by either secure / insecure inclusion.
I've tried with both a Xubuntu PC as a host, and a Raspberry Pi 4
I've tried adding both Kwikset 910 and an August 3 Pro Lock.
The Kwikset 910 device that I'm attempting to add is less than 0.5m away from the UZB when I'm attempting to include. The August Pro 3 is further.
The UZB itself seems to be going into exclusion / inclusion mode, as evidenced by the blinking LED.
I tried with Home Assistant (built on Open ZWave) and Z-Way
Unfortunately, as this is my first Z-wave controller, I have nothing to check it against, and can't be sure of the devices either. Is there anything I can do to ensure the UZB Controller itself is working as intended?
What really confuses me is that nodes show up in my log, but nothing in my dropdown for the Z-Wave nodes.
OZW-Log.txt via OZW Log Analyzer from trying via HomeAssistant:
http://www.openzwave.com/log-analyzer/p ... f17ca7e77/
(I removed zwcfg*.xml from my config directory, and then restarted Home Assistant, guess this wasn't enough to get rid of the warning)
Code: Select all
Controller Data: Role in Network Node Id: 1 Home Id: 0xe3b199af Primary Role: Yes Primary Capability: Yes SUC/SIS in network: 1 (SIS) Hardware Vendor: Z-Wave.Me Vendors Product ID: 1024 / 1 Z-Wave Chip: ZW0500 Firmware Library Type: Static Controller SDK Version: 6.71.01 Serial API Version: 05.27 Capabillities: UUID: 3c3b6a2769f17a85518a754d7365bb34 Subvendor: 0x0115 Nodes limit: 03 Capabillities: SlM Software Information Version number: v3.0.6 Compile-ID: 82a4fd59993dc610c06507351714f95f21475262 Compile-Date: 2020-04-28 13:52:20 +0300 UI UI version 1.5.1 Built date 03-04-2020 13:45:40