Wrong packet from Z-Wave network or Discovery got bad data (

[vicros]

Hi,

I know that there is a lot of messages in the forum about this error message but I need a confirmation that my RaZberry (I received it yesterday from Amazon) is dead.

My Raspberry card is a B+ version.

# LD_LIBRARY_PATH=libs ./z-way-server
Z-Way version v1.7.2 from 2014-07-26 15:20:00 +0400 (build 428d48e765a32b39615c073af93e8666497724c9)
Using default configuration file config.xml
Starting Z-Way for device /dev/ttyAMA0...
failed to discover ZWay: Wrong packet from Z-Wave network or Discovery got bad data (stick communication failed) (-9)

and the trace log is :

[2014-10-16 14:37:28.914] SETDATA controller.data = Empty
[2014-10-16 14:37:28.917] SETDATA controller.data.nodeId = Empty
[2014-10-16 14:37:28.918] SETDATA controller.data.homeId = Empty
[2014-10-16 14:37:28.919] SETDATA controller.data.SUCNodeId = Empty
[2014-10-16 14:37:28.921] SETDATA controller.data.isPrimary = Empty
[2014-10-16 14:37:28.922] SETDATA controller.data.isInOthersNetwork = Empty
[2014-10-16 14:37:28.923] SETDATA controller.data.isRealPrimary = Empty
[2014-10-16 14:37:28.924] SETDATA controller.data.isSUC = Empty
[2014-10-16 14:37:28.926] SETDATA controller.data.SISPresent = Empty
[2014-10-16 14:37:28.927] SETDATA controller.data.libType = Empty
[2014-10-16 14:37:28.928] SETDATA controller.data.SDK = Empty
[2014-10-16 14:37:28.929] SETDATA controller.data.ZWlibMajor = Empty
[2014-10-16 14:37:28.931] SETDATA controller.data.ZWlibMinor = Empty
[2014-10-16 14:37:28.932] SETDATA controller.data.ZWVersion = Empty
[2014-10-16 14:37:28.933] SETDATA controller.data.ZWaveChip = Empty
[2014-10-16 14:37:28.935] SETDATA controller.data.APIVersion = Empty
[2014-10-16 14:37:28.936] SETDATA controller.data.manufacturerId = Empty
[2014-10-16 14:37:28.937] SETDATA controller.data.vendor = Empty
[2014-10-16 14:37:28.938] SETDATA controller.data.manufacturerProductType = Empty
[2014-10-16 14:37:28.940] SETDATA controller.data.manufacturerProductId = Empty
[2014-10-16 14:37:28.941] SETDATA controller.data.capabilities = Empty
[2014-10-16 14:37:28.942] SETDATA controller.data.controllerState = Empty
[2014-10-16 14:37:28.944] SETDATA controller.data.nonManagmentJobs = Empty
[2014-10-16 14:37:28.945] SETDATA controller.data.lastIncludedDevice = Empty
[2014-10-16 14:37:28.946] SETDATA controller.data.lastExcludedDevice = Empty
[2014-10-16 14:37:28.947] SETDATA controller.data.secureInclusion = Empty
[2014-10-16 14:37:28.949] SETDATA controller.data.oldSerialAPIAckTimeout10ms = Empty
[2014-10-16 14:37:28.950] SETDATA controller.data.oldSerialAPIByteTimeout10ms = Empty
[2014-10-16 14:37:28.951] SETDATA controller.data.curSerialAPIAckTimeout10ms = Empty
[2014-10-16 14:37:28.953] SETDATA controller.data.curSerialAPIByteTimeout10ms = Empty
[2014-10-16 14:37:28.954] SETDATA controller.data.libVersionId = Empty
[2014-10-16 14:37:28.955] SETDATA controller.data.countJobs = Empty
[2014-10-16 14:37:28.957] SETDATA controller.data.memoryGetAddress = Empty
[2014-10-16 14:37:28.958] SETDATA controller.data.memoryGetData = Empty
[2014-10-16 14:37:28.959] SETDATA controller.data.memoryManufacturerId = Empty
[2014-10-16 14:37:28.961] SETDATA controller.data.memoryType = Empty
[2014-10-16 14:37:28.962] SETDATA controller.data.memoryCapacity = Empty
[2014-10-16 14:37:28.963] SETDATA controller.data.functionClasses = Empty
[2014-10-16 14:37:28.964] SETDATA controller.data.functionClassesNames = Empty
[2014-10-16 14:37:28.966] SETDATA controller.data.softwareRevisionVersion = Empty
[2014-10-16 14:37:28.967] SETDATA controller.data.softwareRevisionId = Empty
[2014-10-16 14:37:28.968] SETDATA controller.data.softwareRevisionDate = Empty
[2014-10-16 14:37:28.970] SETDATA controller.data.nodeId = 0 (0x00000000)
[2014-10-16 14:37:28.971] SETDATA controller.data.homeId = 0 (0x00000000)
[2014-10-16 14:37:28.972] SETDATA controller.data.SUCNodeId = 0 (0x00000000)
[2014-10-16 14:37:28.973] SETDATA controller.data.isPrimary = False
[2014-10-16 14:37:28.975] SETDATA controller.data.isInOthersNetwork = False
[2014-10-16 14:37:28.976] SETDATA controller.data.isRealPrimary = False
[2014-10-16 14:37:28.977] SETDATA controller.data.isSUC = False
[2014-10-16 14:37:28.979] SETDATA controller.data.SISPresent = False
[2014-10-16 14:37:28.980] SETDATA controller.data.libType = 0 (0x00000000)
[2014-10-16 14:37:28.981] SETDATA controller.data.ZWlibMajor = 0 (0x00000000)
[2014-10-16 14:37:28.982] SETDATA controller.data.ZWlibMinor = 0 (0x00000000)
[2014-10-16 14:37:28.984] SETDATA controller.data.ZWVersion = 0 (0x00000000)
[2014-10-16 14:37:28.985] SETDATA controller.data.manufacturerId = 0 (0x00000000)
[2014-10-16 14:37:28.986] SETDATA controller.data.manufacturerProductType = 0 (0x00000000)
[2014-10-16 14:37:28.987] SETDATA controller.data.manufacturerProductId = 0 (0x00000000)
[2014-10-16 14:37:28.989] SETDATA controller.data.controllerState = 0 (0x00000000)
[2014-10-16 14:37:28.990] SETDATA controller.data.nonManagmentJobs = 0 (0x00000000)
[2014-10-16 14:37:28.991] SETDATA controller.data.secureInclusion = True
[2014-10-16 14:37:28.992] SETDATA controller.data.oldSerialAPIAckTimeout10ms = 0 (0x00000000)
[2014-10-16 14:37:28.993] SETDATA controller.data.oldSerialAPIByteTimeout10ms = 0 (0x00000000)
[2014-10-16 14:37:28.995] SETDATA controller.data.curSerialAPIAckTimeout10ms = 0 (0x00000000)
[2014-10-16 14:37:28.996] SETDATA controller.data.curSerialAPIByteTimeout10ms = 0 (0x00000000)
[2014-10-16 14:37:28.997] SETDATA controller.data.libVersionId = 1 (0x00000001)
[2014-10-16 14:37:28.999] SETDATA controller.data.countJobs = False
[2014-10-16 14:37:29.000] SETDATA controller.data.softwareRevisionVersion = "v1.7.2"
[2014-10-16 14:37:29.001] SETDATA controller.data.softwareRevisionId = "428d48e765a32b39615c073af93e8666497724c9"
[2014-10-16 14:37:29.002] SETDATA controller.data.softwareRevisionDate = "2014-07-26 15:20:00 +0400"
[2014-10-16 14:37:29.004] SETDATA controller.data.functionClasses = int[48]
[2014-10-16 14:37:29.005] [00] 2
[2014-10-16 14:37:29.007] [01] 3
[2014-10-16 14:37:29.008] [02] 4
[2014-10-16 14:37:29.009] [03] 5
[2014-10-16 14:37:29.010] [04] 6
[2014-10-16 14:37:29.011] [05] 7
[2014-10-16 14:37:29.013] [06] 8
[2014-10-16 14:37:29.014] [07] 18
[2014-10-16 14:37:29.015] [08] 19
[2014-10-16 14:37:29.016] [09] 21
[2014-10-16 14:37:29.018] [10] 22
[2014-10-16 14:37:29.019] [11] 32
[2014-10-16 14:37:29.020] [12] 33
[2014-10-16 14:37:29.021] [13] 34
[2014-10-16 14:37:29.023] [14] 35
[2014-10-16 14:37:29.024] [15] 36
[2014-10-16 14:37:29.025] [16] 41
[2014-10-16 14:37:29.026] [17] 42
[2014-10-16 14:37:29.027] [18] 43
[2014-10-16 14:37:29.029] [19] 44
[2014-10-16 14:37:29.030] [20] 45
[2014-10-16 14:37:29.031] [21] 65
[2014-10-16 14:37:29.032] [22] 66
[2014-10-16 14:37:29.033] [23] 70
[2014-10-16 14:37:29.035] [24] 71
[2014-10-16 14:37:29.036] [25] 72
[2014-10-16 14:37:29.037] [26] 73
[2014-10-16 14:37:29.038] [27] 74
[2014-10-16 14:37:29.039] [28] 75
[2014-10-16 14:37:29.041] [29] 76
[2014-10-16 14:37:29.042] [30] 77
[2014-10-16 14:37:29.043] [31] 80
[2014-10-16 14:37:29.044] [32] 81
[2014-10-16 14:37:29.045] [33] 82
[2014-10-16 14:37:29.047] [34] 83
[2014-10-16 14:37:29.048] [35] 84
[2014-10-16 14:37:29.049] [36] 85
[2014-10-16 14:37:29.050] [37] 86
[2014-10-16 14:37:29.052] [38] 87
[2014-10-16 14:37:29.053] [39] 96
[2014-10-16 14:37:29.054] [40] 97
[2014-10-16 14:37:29.055] [41] 98
[2014-10-16 14:37:29.056] [42] 99
[2014-10-16 14:37:29.058] [43] 128
[2014-10-16 14:37:29.059] [44] 210
[2014-10-16 14:37:29.060] [45] 211
[2014-10-16 14:37:29.061] [46] 242
[2014-10-16 14:37:29.063] [47] 243
[2014-10-16 14:37:29.064] SETDATA controller.data.functionClassesNames = string[48]
[2014-10-16 14:37:29.065] [00] "SerialAPIGetInitData"
[2014-10-16 14:37:29.066] [01] "SerialAPIApplicationNodeInformation"
[2014-10-16 14:37:29.068] [02] "ApplicationCommandHandler"
[2014-10-16 14:37:29.069] [03] "GetControllerCapabilities"
[2014-10-16 14:37:29.070] [04] "SerialAPISetTimeouts"
[2014-10-16 14:37:29.071] [05] "GetSerialAPICapabilities"
[2014-10-16 14:37:29.073] [06] "SerialAPISoftReset"
[2014-10-16 14:37:29.074] [07] "SendNodeInformation"
[2014-10-16 14:37:29.075] [08] "SendData"
[2014-10-16 14:37:29.076] [09] "GetVersion"
[2014-10-16 14:37:29.078] [10] "SendDataAbort"
[2014-10-16 14:37:29.079] [11] "GetHomeId"
[2014-10-16 14:37:29.080] [12] "MemoryGetByte"
[2014-10-16 14:37:29.081] [13] "MemoryPutByte"
[2014-10-16 14:37:29.082] [14] "MemoryGetBuffer"
[2014-10-16 14:37:29.084] [15] "MemoryPutBuffer"
[2014-10-16 14:37:29.085] [16] "NVMGetId"
[2014-10-16 14:37:29.086] [17] "NVMExtReadLongBuffer"
[2014-10-16 14:37:29.087] [18] "NVMExtWriteLongBuffer"
[2014-10-16 14:37:29.089] [19] "NVMExtReadLongByte"
[2014-10-16 14:37:29.090] [20] "NVMExtWriteLongByte"
[2014-10-16 14:37:29.091] [21] "GetNodeProtocolInformation"
[2014-10-16 14:37:29.092] [22] "SetDefault"
[2014-10-16 14:37:29.093] [23] "AssignReturnRoute"
[2014-10-16 14:37:29.095] [24] "DeleteReturnRoute"
[2014-10-16 14:37:29.096] [25] "RequestNodeNeighbourUpdate"
[2014-10-16 14:37:29.097] [26] "ApplicationNodeUpdate"
[2014-10-16 14:37:29.098] [27] "AddNodeToNetwork"
[2014-10-16 14:37:29.099] [28] "RemoveNodeFromNetwork"
[2014-10-16 14:37:29.101] [29] "CreateNewPrimary"
[2014-10-16 14:37:29.102] [30] "ControllerChange"
[2014-10-16 14:37:29.103] [31] "SetLearnMode"
[2014-10-16 14:37:29.104] [32] "AssignSUCReturnRoute"
[2014-10-16 14:37:29.105] [33] "EnableSUC"
[2014-10-16 14:37:29.107] [34] "RequestNetworkUpdate"
[2014-10-16 14:37:29.108] [35] "SetSUCNodeId"
[2014-10-16 14:37:29.109] [36] "DeleteSUCReturnRoute"
[2014-10-16 14:37:29.110] [37] "GetSUCNodeId"
[2014-10-16 14:37:29.112] [38] "SendSUCNodeId"
[2014-10-16 14:37:29.113] [39] "RequestNodeInformation"
[2014-10-16 14:37:29.114] [40] "RemoveFailedNode"
[2014-10-16 14:37:29.115] [41] "IsFailedNode"
[2014-10-16 14:37:29.116] [42] "ReplaceFailedNode"
[2014-10-16 14:37:29.117] [43] "GetRoutingTableLine"
[2014-10-16 14:37:29.119] [44] "WatchDogStart"
[2014-10-16 14:37:29.120] [45] "WatchDogStop"
[2014-10-16 14:37:29.121] [46] "ZMEFreqChange"
[2014-10-16 14:37:29.122] [47] "ZMERestore"
[2014-10-16 14:37:29.124] Opened device: /dev/ttyAMA0
[2014-10-16 14:37:29.127] Worker thread successfully created
[2014-10-16 14:37:29.129] Worker thread entry point
[2014-10-16 14:37:29.139] Adding job: Get controller info and supported function classes
[2014-10-16 14:37:29.142] SENDING (cb 0x07): ( 01 03 00 07 FB )
[2014-10-16 14:37:29.154] RECEIVED ACK
[2014-10-16 14:37:29.165] RECEIVED: ( 01 2B 01 07 04 02 01 47 00 02 00 03 FE 00 16 80 0C 00 00 00 E3 97 7D 80 07 00 00 80 00 00 00 00 00 00 00 00 00 00 02 00 00 80 07 00 7C )
[2014-10-16 14:37:29.167] SENT ACK
[2014-10-16 14:37:29.168] SETDATA controller.data.APIVersion = "04.02"
[2014-10-16 14:37:29.170] SETDATA controller.data.manufacturerId = 327 (0x00000147)
[2014-10-16 14:37:29.171] SETDATA controller.data.manufacturerProductType = 2 (0x00000002)
[2014-10-16 14:37:29.172] SETDATA controller.data.manufacturerProductId = 3 (0x00000003)
[2014-10-16 14:37:29.179] SETDATA controller.data.vendor = "RaZberry by Z-Wave.Me"
[2014-10-16 14:37:29.180] Supported Function Classes:
[2014-10-16 14:37:29.181] ---------------------------
[2014-10-16 14:37:29.183] 0x02 SerialAPIGetInitData
[2014-10-16 14:37:29.184] 0x03 SerialAPIApplicationNodeInformation
[2014-10-16 14:37:29.185] 0x04 ApplicationCommandHandler
[2014-10-16 14:37:29.186] 0x05 GetControllerCapabilities
[2014-10-16 14:37:29.187] 0x06 SerialAPISetTimeouts
[2014-10-16 14:37:29.189] 0x07 GetSerialAPICapabilities
[2014-10-16 14:37:29.190] 0x08 SerialAPISoftReset
[2014-10-16 14:37:29.191] 0x12 SendNodeInformation
[2014-10-16 14:37:29.193] 0x13 SendData
[2014-10-16 14:37:29.194] 0x15 GetVersion
[2014-10-16 14:37:29.195] 0x20 GetHomeId
[2014-10-16 14:37:29.196] 0x23 MemoryGetBuffer
[2014-10-16 14:37:29.197] 0x24 MemoryPutBuffer
[2014-10-16 14:37:29.199] 0x41 GetNodeProtocolInformation
[2014-10-16 14:37:29.200] 0x42 SetDefault
[2014-10-16 14:37:29.201] 0x46 AssignReturnRoute
[2014-10-16 14:37:29.202] 0x47 DeleteReturnRoute
[2014-10-16 14:37:29.204] 0x48 RequestNodeNeighbourUpdate
[2014-10-16 14:37:29.205] 0x49 ApplicationNodeUpdate
[2014-10-16 14:37:29.206] 0x4a AddNodeToNetwork
[2014-10-16 14:37:29.207] 0x4b RemoveNodeFromNetwork
[2014-10-16 14:37:29.209] 0x4d ControllerChange
[2014-10-16 14:37:29.210] 0x50 SetLearnMode
[2014-10-16 14:37:29.211] 0x51 AssignSUCReturnRoute
[2014-10-16 14:37:29.212] 0x53 RequestNetworkUpdate
[2014-10-16 14:37:29.214] 0x54 SetSUCNodeId
[2014-10-16 14:37:29.215] 0x55 DeleteSUCReturnRoute
[2014-10-16 14:37:29.216] 0x56 GetSUCNodeId
[2014-10-16 14:37:29.217] 0x57 SendSUCNodeId
[2014-10-16 14:37:29.219] 0x60 RequestNodeInformation
[2014-10-16 14:37:29.220] 0x61 RemoveFailedNode
[2014-10-16 14:37:29.221] 0x62 IsFailedNode
[2014-10-16 14:37:29.222] 0x63 ReplaceFailedNode
[2014-10-16 14:37:29.224] 0x80 GetRoutingTableLine
[2014-10-16 14:37:29.225] 0xd2 WatchDogStart
[2014-10-16 14:37:29.226] 0xf0 UNKNOWN
[2014-10-16 14:37:29.227] 0xf1 UNKNOWN
[2014-10-16 14:37:29.229] 0xf2 ZMEFreqChange
[2014-10-16 14:37:29.230] 0xf3 ZMERestore
[2014-10-16 14:37:29.231] SETDATA controller.data.capabilities = int[39]
[2014-10-16 14:37:29.232] [00] 2
[2014-10-16 14:37:29.233] [01] 3
[2014-10-16 14:37:29.235] [02] 4
[2014-10-16 14:37:29.236] [03] 5
[2014-10-16 14:37:29.237] [04] 6
[2014-10-16 14:37:29.238] [05] 7
[2014-10-16 14:37:29.240] [06] 8
[2014-10-16 14:37:29.241] [07] 18
[2014-10-16 14:37:29.242] [08] 19
[2014-10-16 14:37:29.243] [09] 21
[2014-10-16 14:37:29.245] [10] 32
[2014-10-16 14:37:29.246] [11] 35
[2014-10-16 14:37:29.247] [12] 36
[2014-10-16 14:37:29.248] [13] 65
[2014-10-16 14:37:29.249] [14] 66
[2014-10-16 14:37:29.251] [15] 70
[2014-10-16 14:37:29.252] [16] 71
[2014-10-16 14:37:29.253] [17] 72
[2014-10-16 14:37:29.254] [18] 73
[2014-10-16 14:37:29.256] [19] 74
[2014-10-16 14:37:29.257] [20] 75
[2014-10-16 14:37:29.258] [21] 77
[2014-10-16 14:37:29.259] [22] 80
[2014-10-16 14:37:29.260] [23] 81
[2014-10-16 14:37:29.262] [24] 83
[2014-10-16 14:37:29.263] [25] 84
[2014-10-16 14:37:29.264] [26] 85
[2014-10-16 14:37:29.265] [27] 86
[2014-10-16 14:37:29.267] [28] 87
[2014-10-16 14:37:29.268] [29] 96
[2014-10-16 14:37:29.269] [30] 97
[2014-10-16 14:37:29.270] [31] 98
[2014-10-16 14:37:29.271] [32] 99
[2014-10-16 14:37:29.273] [33] 128
[2014-10-16 14:37:29.274] [34] 210
[2014-10-16 14:37:29.275] [35] 240
[2014-10-16 14:37:29.276] [36] 241
[2014-10-16 14:37:29.278] [37] 242
[2014-10-16 14:37:29.279] [38] 243
[2014-10-16 14:37:29.280] ---------------------------
[2014-10-16 14:37:29.281] Initialization done
[2014-10-16 14:37:29.282] Job 0x07 (Get controller info and supported function classes): success
[2014-10-16 14:37:29.284] Adding job: Set Serial API timeouts
[2014-10-16 14:37:29.285] Adding job: WatchDog Start
[2014-10-16 14:37:29.287] Adding job: Get home id and controller node id
[2014-10-16 14:37:29.288] Removing job: Get controller info and supported function classes
[2014-10-16 14:37:29.300] SENDING (cb 0x0a): ( 01 05 00 06 0A 0A FC )
[2014-10-16 14:37:29.312] RECEIVED ACK
[2014-10-16 14:37:29.323] RECEIVED: ( 01 05 01 06 0A 0A FD )
[2014-10-16 14:37:29.324] SENT ACK
[2014-10-16 14:37:29.326] Job 0x06 (Set Serial API timeouts): Old timeouts are: ACK timeout 100 ms and Byte timeout 100 ms
[2014-10-16 14:37:29.327] SETDATA controller.data.oldSerialAPIAckTimeout10ms = 10 (0x0000000a)
[2014-10-16 14:37:29.328] SETDATA controller.data.oldSerialAPIByteTimeout10ms = 10 (0x0000000a)
[2014-10-16 14:37:29.329] SETDATA controller.data.curSerialAPIAckTimeout10ms = 10 (0x0000000a)
[2014-10-16 14:37:29.331] SETDATA controller.data.curSerialAPIByteTimeout10ms = 10 (0x0000000a)
[2014-10-16 14:37:29.332] Job 0x06 (Set Serial API timeouts): success
[2014-10-16 14:37:29.333] Removing job: Set Serial API timeouts
[2014-10-16 14:37:29.346] SENDING (cb 0xd2): ( 01 03 00 D2 2E )
[2014-10-16 14:37:29.357] RECEIVED ACK
[2014-10-16 14:37:29.358] Removing job: WatchDog Start
[2014-10-16 14:37:29.371] SENDING (cb 0x20): ( 01 03 00 20 DC )
[2014-10-16 14:37:29.382] RECEIVED ACK
[2014-10-16 14:37:29.394] RECEIVED: ( 01 08 01 20 FA 7F 5A BB 01 B3 )
[2014-10-16 14:37:29.395] SENT ACK
[2014-10-16 14:37:29.396] SETDATA controller.data.nodeId = 1 (0x00000001)
[2014-10-16 14:37:29.398] SETDATA controller.data.homeId = -92316997 (0xfa7f5abb)
[2014-10-16 14:37:29.399] Job 0x20 (Get home id and controller node id): Home id: 0xfa7f5abb, controller node id: 1
[2014-10-16 14:37:29.400] Job 0x20 (Get home id and controller node id): success
[2014-10-16 14:37:29.402] Adding job: Get controller capabilities
[2014-10-16 14:37:29.403] Adding job: Get controller version
[2014-10-16 14:37:29.404] Adding job: Get SUC node id
[2014-10-16 14:37:29.406] Adding job: Get initial data about network devices
[2014-10-16 14:37:29.407] Removing job: Get home id and controller node id
[2014-10-16 14:37:29.419] SENDING (cb 0x05): ( 01 03 00 05 F9 )
[2014-10-16 14:37:29.431] RECEIVED ACK
[2014-10-16 14:37:29.442] RECEIVED: ( 01 04 01 05 28 D7 )
[2014-10-16 14:37:29.443] SENT ACK
[2014-10-16 14:37:29.445] SETDATA controller.data.isPrimary = True
[2014-10-16 14:37:29.446] SETDATA controller.data.isInOthersNetwork = False
[2014-10-16 14:37:29.447] SETDATA controller.data.SISPresent = False
[2014-10-16 14:37:29.449] SETDATA controller.data.isRealPrimary = True
[2014-10-16 14:37:29.450] SETDATA controller.data.isSUC = False
[2014-10-16 14:37:29.451] Job 0x05 (Get controller capabilities): success
[2014-10-16 14:37:29.452] Removing job: Get controller capabilities
[2014-10-16 14:37:29.465] SENDING (cb 0x15): ( 01 03 00 15 E9 )
[2014-10-16 14:37:29.476] RECEIVED ACK
[2014-10-16 14:37:29.487] RECEIVED: ( 01 10 01 15 5A 2D 57 61 76 65 20 33 2E 34 32 00 01 93 )
[2014-10-16 14:37:29.489] SENT ACK
[2014-10-16 14:37:29.492] SETDATA controller.data.SDK = "4.54.01"
[2014-10-16 14:37:29.494] SETDATA controller.data.ZWlibMajor = 3 (0x00000003)
[2014-10-16 14:37:29.495] SETDATA controller.data.ZWlibMinor = 42 (0x0000002a)
[2014-10-16 14:37:29.496] SETDATA controller.data.libType = "Static Controller"
[2014-10-16 14:37:29.498] Job 0x15 (Get controller version): success
[2014-10-16 14:37:29.499] Removing job: Get controller version
[2014-10-16 14:37:29.511] SENDING (cb 0x56): ( 01 03 00 56 AA )
[2014-10-16 14:37:29.523] RECEIVED ACK
[2014-10-16 14:37:29.534] RECEIVED: ( 01 04 01 56 00 AC )
[2014-10-16 14:37:29.535] SENT ACK
[2014-10-16 14:37:29.537] Job 0x56 (Get SUC node id): No SUC
[2014-10-16 14:37:29.538] SETDATA controller.data.SUCNodeId = 0 (0x00000000)
[2014-10-16 14:37:29.539] Job 0x56 (Get SUC node id): success
[2014-10-16 14:37:29.541] Removing job: Get SUC node id
[2014-10-16 14:37:29.553] SENDING (cb 0x02): ( 01 03 00 02 FE )
[2014-10-16 14:37:29.565] RECEIVED ACK
[2014-10-16 14:37:29.599] RECEIVED: ( 01 25 01 02 05 00 1D 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 C3 )
[2014-10-16 14:37:29.600] SENT ACK
[2014-10-16 14:37:29.601] SETDATA controller.data.ZWVersion = 5 (0x00000005)
[2014-10-16 14:37:29.602] SETDATA controller.data.ZWaveChip = "ZW0301"
[2014-10-16 14:37:29.604] Capabilities:
[2014-10-16 14:37:29.605] - Controller API
[2014-10-16 14:37:29.606] - Timer function not supported
[2014-10-16 14:37:29.607] - Primary Controller
[2014-10-16 14:37:29.609] Detected Devices:
[2014-10-16 14:37:29.610] -----------------
[2014-10-16 14:37:29.611] -----------------
[2014-10-16 14:37:29.613] Loading configuration data from ./config/zddx/fa7f5abb-DevicesData.xml
[2014-10-16 14:37:29.614] Job 0x02 (Get initial data about network devices): success
[2014-10-16 14:37:29.617] Adding job: Set controller node information frame
[2014-10-16 14:37:29.618] No controller device found
[2014-10-16 14:37:29.620] Removing job: Get initial data about network devices
[2014-10-16 14:37:29.631] Worker thread exit point
[2014-10-16 14:37:29.633] Worker thread successfully finished


I also try to send the reset code with :# echo -ne "x01x03x00x08xf4" > /dev/ttyAMA0

But still get error (-9)


Please Help, is it a bad configuration or my RaZberry is dead.

Thanks.

Vic.

[vicros]

I was able to fix the problem now.

Previously I use domoticz-raspberrypi-sdcard-r2_2025.img file to install my raspberry pi B+, and with this binary RaZberry is not working.

Using now 2014-09-09-wheezy-raspbian.img binary, RaZberry seems to work correctly, I can access to http://@IP:8083

[PoltoS]

Looks like your controller deleted himself....

Do: echo -ne "\x01\x04\x00\x42\x01\xB8" > /dev/ttyAMA0

should help