UZB1 issues
Posted: 21 Dec 2014 12:20
Trying to use UZB1 + razberry, no success.
The stick is alive (works fine with Indigo6 on Mac), USB ports are also OK (WiFi adapter works flawlessly)
Linux raspberrypi 3.12.28+ #709 PREEMPT Mon Sep 8 15:28:00 BST 2014 armv6l GNU/Linux
[2014-12-20 22:44:48.012] [D] [zway] Opened device: /dev/ttyAMA0
[2014-12-20 22:44:48.013] [D] [zway] Worker thread successfully created
[2014-12-20 22:44:48.015] [D] [zway] Worker thread entry point
[2014-12-20 22:44:48.025] [zway] Adding job: Get controller info and supported function classes
[2014-12-20 22:44:48.025] [D] [zway] SENDING: ( 01 03 00 07 FB )
[2014-12-20 22:44:48.230] [zway] Job 0x07 (Get controller info and supported function classes): No ACK received before timeout
[2014-12-20 22:44:48.230] [D] [zway] SENDING: ( 01 03 00 07 FB )
[2014-12-20 22:44:48.434] [zway] Job 0x07 (Get controller info and supported function classes): No ACK received before timeout
[2014-12-20 22:44:48.435] [D] [zway] SENDING: ( 01 03 00 07 FB )
[2014-12-20 22:44:48.638] [zway] Job 0x07 (Get controller info and supported function classes): No ACK received before timeout
[2014-12-20 22:44:48.638] [W] [zway] Job 0x07 (Get controller info and supported function classes) dropped: too many resends
[2014-12-20 22:44:48.639] [D] [zway] Job 0x07 (Get controller info and supported function classes): fail
[2014-12-20 22:44:48.639] [C] [zway] Get Serial API Capabilities returned zero.
[2014-12-20 22:44:48.640] [zway] Removing job: Get controller info and supported function classes
[2014-12-20 22:44:48.650] [D] [zway] Worker thread exit point
[2014-12-20 22:44:48.650] [D] [zway] Worker thread successfully finished
[2014-12-20 22:44:48.670] [core] Notification: critical (z-wave): Can not start Z-Wave binding: Error: Bad data - communication failed
[2014-12-20 22:44:54.888] [E] [zway] SaveData will not save data since it wasn't loaded. This is to prevent data loss.
The stick is alive (works fine with Indigo6 on Mac), USB ports are also OK (WiFi adapter works flawlessly)
Linux raspberrypi 3.12.28+ #709 PREEMPT Mon Sep 8 15:28:00 BST 2014 armv6l GNU/Linux
[2014-12-20 22:44:48.012] [D] [zway] Opened device: /dev/ttyAMA0
[2014-12-20 22:44:48.013] [D] [zway] Worker thread successfully created
[2014-12-20 22:44:48.015] [D] [zway] Worker thread entry point
[2014-12-20 22:44:48.025] [zway] Adding job: Get controller info and supported function classes
[2014-12-20 22:44:48.025] [D] [zway] SENDING: ( 01 03 00 07 FB )
[2014-12-20 22:44:48.230] [zway] Job 0x07 (Get controller info and supported function classes): No ACK received before timeout
[2014-12-20 22:44:48.230] [D] [zway] SENDING: ( 01 03 00 07 FB )
[2014-12-20 22:44:48.434] [zway] Job 0x07 (Get controller info and supported function classes): No ACK received before timeout
[2014-12-20 22:44:48.435] [D] [zway] SENDING: ( 01 03 00 07 FB )
[2014-12-20 22:44:48.638] [zway] Job 0x07 (Get controller info and supported function classes): No ACK received before timeout
[2014-12-20 22:44:48.638] [W] [zway] Job 0x07 (Get controller info and supported function classes) dropped: too many resends
[2014-12-20 22:44:48.639] [D] [zway] Job 0x07 (Get controller info and supported function classes): fail
[2014-12-20 22:44:48.639] [C] [zway] Get Serial API Capabilities returned zero.
[2014-12-20 22:44:48.640] [zway] Removing job: Get controller info and supported function classes
[2014-12-20 22:44:48.650] [D] [zway] Worker thread exit point
[2014-12-20 22:44:48.650] [D] [zway] Worker thread successfully finished
[2014-12-20 22:44:48.670] [core] Notification: critical (z-wave): Can not start Z-Wave binding: Error: Bad data - communication failed
[2014-12-20 22:44:54.888] [E] [zway] SaveData will not save data since it wasn't loaded. This is to prevent data loss.