Error: Too many bindings to one dataholder

Discussions about Z-Way software and Z-Wave technology in general
coolbloke1324
Posts: 18
Joined: 29 Nov 2015 15:47

Error: Too many bindings to one dataholder

Post by coolbloke1324 »

I'm seeing an error in my zway events log (/smarthome/#/events):
Cannot create vDev based on: 23-0-113: Error: Too many bindings to one dataholder
This is happening quite a lot. Does anyone know why this would happen and what it means / how to rectify it?

User avatar
PoltoS
Posts: 5507
Joined: 26 Jan 2011 19:36

Re: Error: Too many bindings to one dataholder

Post by PoltoS »

This means there are too many subscribers to some value. Is it the last v2.2.0? We have rised this value compared to previous 2.1.1

coolbloke1324
Posts: 18
Joined: 29 Nov 2015 15:47

Re: Error: Too many bindings to one dataholder

Post by coolbloke1324 »

Hey, yes I'm running 2.2.0. It seems to happen just after setting the light dimmer to 99 or 0 when the motion sensor activates.
Attachments
Screen Shot 2015-12-14 at 10.25.41.png
Screen Shot 2015-12-14 at 10.25.41.png (325.53 KiB) Viewed 10663 times

coolbloke1324
Posts: 18
Joined: 29 Nov 2015 15:47

Re: Error: Too many bindings to one dataholder

Post by coolbloke1324 »

FYI In my network, device 35 is an Aeon Labs Multisensor 6. The light it is switching on and off (via scenes) is an Aeon Labs RGB Bulb.

SjaakvE
Posts: 1
Joined: 18 Dec 2015 00:41

Re: Error: Too many bindings to one dataholder

Post by SjaakvE »

Hi,

I am having the same error. Every 10 minutes the error is repeated 12 times.
22:30 | Cannot create vDev based on: 12-0-113: Error: Too many bindings to one dataholder

I started seeing it after an upgrade to v2.2.0. Device 12 for me is a Fibaro dimmer 2.

Is this max subscriber value that was increased in version v2.2.0 a setting that we can lower ourselves or does it require a new version? If we can change it ourselves where can we find it and what was the previous version set to?

PS great product I have started to install this in my house about 2 months ago and it is working great.

Best regards,

SjaakvE

Sparkacus
Posts: 24
Joined: 26 Nov 2015 16:19

Re: Error: Too many bindings to one dataholder

Post by Sparkacus »

Hey,

I also have this same problem. I think it's linked to the Aeon Multisensor 6... I don't have many z-wave devices yet.
This means there are too many subscribers to some value. Is it the last v2.2.0? We have rised this value compared to previous 2.1.1
Sorry for my stupidity, but what does ^ actually mean?

I'm using the latest z-way version v2.2.0

I've played around with the apps but as far as I'm aware I haven't linked the Aeon Multisensor 6 to anything. For now it just spits out Temp, Humidity, Lux, Battery etc

Code: Select all

[2015-12-18 07:44:34.110] [I] [core] Notification: device-info (device-OnOff): {"dev":"Aeon Labs Burglar (5.0.113.7.8) Alarm","l":"off"}
[2015-12-18 07:44:34.522] [I] [core] Notification: error (core): Cannot create vDev based on: 5-0-113: Error: Too many bindings to one dataholder
[2015-12-18 07:44:34.536] [I] [core] Error: Too many bindings to one dataholder
    at Error (native)
    at ZWave.dataBind (automation/modules/ZWave/index.js:1081:18)
    at automation/modules/ZWave/index.js:2217:12
    at Array.forEach (native)
    at ZWave.parseAddCommandClass (automation/modules/ZWave/index.js:2120:25)
    at ZDataHolder.<anonymous> (automation/modules/ZWave/index.js:2297:12)
[2015-12-18 07:44:48.043] [D] [zway] RECEIVED: ( 01 09 00 04 00 05 03 20 01 FF 2A )
[2015-12-18 07:44:48.043] [D] [zway] SENT ACK
[2015-12-18 07:44:48.043] [D] [zway] SETDATA devices.5.data.lastReceived = 0 (0x00000000)
[2015-12-18 07:44:48.044] [D] [zway] SETDATA devices.1.instances.0.commandClasses.32.data.srcNodeId = 5 (0x00000005)
[2015-12-18 07:44:48.044] [D] [zway] SETDATA devices.1.instances.0.commandClasses.32.data.srcInstanceId = 0 (0x00000000)
[2015-12-18 07:44:48.044] [D] [zway] SETDATA devices.1.instances.0.commandClasses.32.data.level = 255 (0x000000ff)
[2015-12-18 07:44:48.054] [I] [core] Notification: device-info (device-OnOff): {"dev":" (5.0.0) Button","l":"on"}
[2015-12-18 07:44:48.339] [D] [zway] RECEIVED: ( 01 10 00 04 00 05 0A 71 05 00 00 00 FF 07 08 00 00 60 )
[2015-12-18 07:44:48.339] [D] [zway] SENT ACK
[2015-12-18 07:44:48.339] [D] [zway] SETDATA devices.5.data.lastReceived = 0 (0x00000000)
[2015-12-18 07:44:48.340] [D] [zway] SETDATA devices.5.instances.0.commandClasses.113.data.7.eventParameters = byte[0]
[2015-12-18 07:44:48.340] [D] [zway]   ( zero-length buffer )
[2015-12-18 07:44:48.340] [D] [zway] SETDATA devices.5.instances.0.commandClasses.113.data.7.event = 8 (0x00000008)
[2015-12-18 07:44:48.366] [D] [zway] SETDATA devices.5.instances.0.commandClasses.113.data.7.eventString = "Motion detected, location unknown"
[2015-12-18 07:44:48.367] [D] [zway] SETDATA devices.5.instances.0.commandClasses.113.data.7.status = 255 (0x000000ff)
[2015-12-18 07:44:48.367] [D] [zway] SETDATA devices.5.instances.0.commandClasses.113.data.7 = Empty
[2015-12-18 07:44:48.380] [I] [core] Notification: error (core): Cannot create vDev based on: 5-0-113: Error: Too many bindings to one dataholder
[2015-12-18 07:44:48.393] [I] [core] Error: Too many bindings to one dataholder
    at Error (native)
    at ZWave.dataBind (automation/modules/ZWave/index.js:1081:18)
    at automation/modules/ZWave/index.js:2217:12
    at Array.forEach (native)
    at ZWave.parseAddCommandClass (automation/modules/ZWave/index.js:2120:25)
    at ZDataHolder.<anonymous> (automation/modules/ZWave/index.js:2297:12)
[2015-12-18 07:44:48.523] [I] [core] Notification: error (core): Cannot create vDev based on: 5-0-113: Error: Too many bindings to one dataholder
[2015-12-18 07:44:48.535] [I] [core] Error: Too many bindings to one dataholder
    at Error (native)
    at ZWave.dataBind (automation/modules/ZWave/index.js:1081:18)
    at automation/modules/ZWave/index.js:2217:12
    at Array.forEach (native)
    at ZWave.parseAddCommandClass (automation/modules/ZWave/index.js:2120:25)
    at ZDataHolder.<anonymous> (automation/modules/ZWave/index.js:2297:12)
[2015-12-18 07:44:48.549] [I] [core] Notification: error (core): Cannot create vDev based on: 5-0-113: Error: Too many bindings to one dataholder
[2015-12-18 07:44:48.561] [I] [core] Error: Too many bindings to one dataholder
    at Error (native)
    at ZWave.dataBind (automation/modules/ZWave/index.js:1081:18)
    at automation/modules/ZWave/index.js:2217:12
    at Array.forEach (native)
    at ZWave.parseAddCommandClass (automation/modules/ZWave/index.js:2120:25)
    at ZDataHolder.<anonymous> (automation/modules/ZWave/index.js:2297:12)
[2015-12-18 07:44:48.575] [I] [core] Notification: error (core): Cannot create vDev based on: 5-0-113: Error: Too many bindings to one dataholder
[2015-12-18 07:44:48.587] [I] [core] Error: Too many bindings to one dataholder
    at Error (native)
    at ZWave.dataBind (automation/modules/ZWave/index.js:1081:18)
    at automation/modules/ZWave/index.js:2217:12
    at Array.forEach (native)
    at ZWave.parseAddCommandClass (automation/modules/ZWave/index.js:2120:25)
    at ZDataHolder.<anonymous> (automation/modules/ZWave/index.js:2297:12)
[2015-12-18 07:44:48.594] [I] [core] Notification: device-info (device-OnOff): {"dev":"Aeon Labs Burglar (5.0.113.7.8) Alarm","l":"on"}
[2015-12-18 07:44:48.625] [I] [core] Notification: error (core): Cannot create vDev based on: 5-0-113: Error: Too many bindings to one dataholder
[2015-12-18 07:44:48.638] [I] [core] Error: Too many bindings to one dataholder
    at Error (native)
    at ZWave.dataBind (automation/modules/ZWave/index.js:1081:18)
    at automation/modules/ZWave/index.js:2217:12
    at Array.forEach (native)
    at ZWave.parseAddCommandClass (automation/modules/ZWave/index.js:2120:25)
    at ZDataHolder.<anonymous> (automation/modules/ZWave/index.js:2297:12)

coolbloke1324
Posts: 18
Joined: 29 Nov 2015 15:47

Re: Error: Too many bindings to one dataholder

Post by coolbloke1324 »

It's interesting that the function 113 is where the errors are occurring in all our logs.

alphons
Posts: 29
Joined: 18 Dec 2015 21:26

Re: Error: Too many bindings to one dataholder

Post by alphons »

I have this error as well.
Would be nice to get rid of it in the log.

"21:59 | Cannot create vDev based on: 2-0-113: Error: Too many bindings to one dataholder"

Aeon multisensor

rudi
Posts: 4
Joined: 15 Dec 2015 20:20

Re: Error: Too many bindings to one dataholder

Post by rudi »

Hi,
i have this error as well.
A lot off.....
More than 25 errors per device, roughly every hour!

V2.2.0
Fibaro FGSD-002

bralez
Posts: 4
Joined: 04 Jan 2016 12:09

Re: Error: Too many bindings to one dataholder

Post by bralez »

Hi,
same error with the latest z-way version v2.2.0 and the Aeon Multisensor 6.

Code: Select all

[2016-01-04 10:11:00.429] [I] [core] Notification: error (core): Cannot create vDev based on: 3-0-113: Error: Too many bindings to one dataholder
[2016-01-04 10:11:00.432] [I] [core] Error: Too many bindings to one dataholder
    at Error (native)
    at ZWave.dataBind (automation/modules/ZWave/index.js:1081:18)
    at automation/modules/ZWave/index.js:2217:12
    at Array.forEach (native)
    at ZWave.parseAddCommandClass (automation/modules/ZWave/index.js:2120:25)
    at ZDataHolder.<anonymous> (automation/modules/ZWave/index.js:2297:12)

Post Reply