UZB -> Missing Smart Start

Discussions about Z-Way software and Z-Wave technology in general
Post Reply
acanadasSC
Posts: 2
Joined: 10 Nov 2016 13:28

UZB -> Missing Smart Start

Post by acanadasSC »

I've installed Z-Way and updated it to the latest version 3.0.3 and upgraded my UZB firmware to 5.33, 5.34 and 5.36. None of them show any option to configure Smart Start anywhere in the UI or Expert UI.

Controller info shows the following:

Code: Select all

Hardware
Vendor:	Z-Wave.Me
Vendors Product ID:	1024 / 1
Z-Wave Chip:	ZW0500

Firmware
Library Type:	Static Controller
SDK Version:	6.81.01
Serial API Version:	05.36

Capabillities:
UUID:	721018bf990f419c6e507be12b09f701
Subvendor:	0x0115
Nodes limit:	03
Capabillities:	SlM

Software Information
Version number:	v3.0.3
Compile-ID:	d0b3db3637dc7b4c2cf34c1d4c6b1fd696d2388c
Compile-Date:	2019-12-13 00:48:57 +0300

UI
UI version	1.5.0
Built date	18-07-2019 01:48:51
And Show Controller Data shows the following:

Code: Select all

/: None (11:53)
    nodeId: 1 (11:53)
    homeId: [REMOVED BY THREAD AUTHOR]
    SUCNodeId: 1 (11:53)
    isPrimary: true (11:53)
    isInOthersNetwork: false (11:53)
    isRealPrimary: true (11:53)
    isSUC: true (11:53)
    SISPresent: true (11:53)
    libType: Static Controller (11:53)
    SDK: 6.81.01 (11:53)
    ZWlibMajor: 6 (11:53)
    ZWlibMinor: 2 (11:53)
    ZWLib: 1 (11:53)
    ZWVersion: 6 (11:53)
    ZWaveChip: ZW0500 (11:53)
    APIVersion: 05.36 (11:53)
    APIVersionMajor: 5 (11:53)
    APIVersionMinor: 36 (11:53)
    manufacturerId: 277 (11:53)
    vendor: Z-Wave.Me (11:53)
    manufacturerProductType: 1024 (11:53)
    manufacturerProductId: 1 (11:53)
    bootloaderCRC: 40196 (11:53)
    firmwareCRC: 25777 (11:53)
    capabilities: 2,3,4,5,6,7,8,9,10,11,16,17,18,19,20,21,22,23,28,32,33,34,35,36,39,40,41,42,43,44,45,46,55,56,57,58,59,63,65,66,68,69,70,71,72,73,74,75,76,77,79,80,81,83,84,85,86,87,88,94,95,96,97,98,99,102,103,120,128,144,146,147,152,180,182,183,184,185,186,189,190,191,208,209,210,211,212,238,239,242,244,245,247 (11:53)
    controllerState: 0 (11:53)
    nonManagmentJobs: 0 (11:53)
    lastIncludedDevice: 0 (11:53)
    lastExcludedDevice: 0 (11:53)
    secureInclusion: true (11:53)
    oldSerialAPIAckTimeout10ms: 150 (11:53)
    oldSerialAPIByteTimeout10ms: 15 (11:53)
    curSerialAPIAckTimeout10ms: 10 (11:53)
    curSerialAPIByteTimeout10ms: 10 (11:53)
    countJobs: false (11:53)
    memoryGetAddress: 32768 (11:53)
    memoryGetData: 244,245,133,126,113,72,89,124,153,51,31,21,211,60,80,25,48,108,39,50,251,34,186,44,65,246,224,143,11,157,34,251,177,188,56,13,115,43,170,75,63,145,147,208,242,84,245,89,18,127,208,179,216,239,137,201,162,130,205,124,1,160,66,68 (11:53)
    memoryManufacturerId: None (11:53)
    memoryType: None (11:53)
    memoryCapacity: None (11:53)
    functionClasses: 2,3,4,5,6,7,8,11,18,19,21,22,23,32,33,34,35,36,39,41,42,43,44,45,57,58,59,63,65,66,68,70,71,72,73,74,75,76,77,80,81,82,83,84,85,86,87,94,96,97,98,99,128,146,147,186,190,208,209,210,211,242,243,244,245,248 (11:53)
    functionClassesNames: SerialAPIGetInitData,SerialAPIApplicationNodeInformation,ApplicationCommandHandler,GetControllerCapabilities,SerialAPISetTimeouts,GetSerialAPICapabilities,SerialAPISoftReset,SerialAPISetup,SendNodeInformation,SendData,GetVersion,SendDataAbort,RFPowerLevelSet,GetHomeId,MemoryGetByte,MemoryPutByte,MemoryGetBuffer,MemoryPutBuffer,FlashAutoProgSet,NVMGetId,NVMExtReadLongBuffer,NVMExtWriteLongBuffer,NVMExtReadLongByte,NVMExtWriteLongByte,ClearNetworkStats,GetNetworkStats,GetBackgroundRSSI,RemoveNodeIdFromNetwork,GetNodeProtocolInformation,SetDefault,ReplicationReceiveComplete,AssignReturnRoute,DeleteReturnRoute,RequestNodeNeighbourUpdate,ApplicationNodeUpdate,AddNodeToNetwork,RemoveNodeFromNetwork,CreateNewPrimary,ControllerChange,SetLearnMode,AssignSUCReturnRoute,EnableSUC,RequestNetworkUpdate,SetSUCNodeId,DeleteSUCReturnRoute,GetSUCNodeId,SendSUCNodeId,ExploreRequestInclusion,RequestNodeInformation,RemoveFailedNode,IsFailedNode,ReplaceFailedNode,GetRoutingTableLine,GetPriorityRoute,SetPriorityRoute,RFPowerLevelGet,SendTestFrame,SetPromiscuousMode,PromiscuousCommandHandler,WatchDogStart,WatchDogStop,ZMEFreqChange,ZMERestore,ZMEBootloaderFlash,ZMECapabilities,ZMESerialAPIOptions (11:53)
    softwareRevisionVersion: v3.0.3 (11:53)
    softwareRevisionId: d0b3db3637dc7b4c2cf34c1d4c6b1fd696d2388c (11:53)
    softwareRevisionDate: 2019-12-13 00:48:57 +0300 (11:53)
    uuid: 721018bf990f419c6e507be12b09f701 (11:53)
    caps: 1,21,3,5 (11:53)
    capsNonce: 0,0,0,0 (11:53)
    countDown: 0 (11:53)
    frequency: EU (11:53)
    deviceRelaxDelay: 3 (11:53)
    statistics: None (11:53)
        backgroundRSSI: None (11:53)
            channel1: 165 (11:59)
            channel2: 125 (11:59)
            channel3: 127 (11:59)
        RFTxFrames: 1 (11:53)
        RFTxLBTBackOffs: 0 (11:53)
        RFRxFrames: 0 (11:53)
        RFRxLRCErrors: 0 (11:53)
        RFRxCRC16Errors: 0 (11:53)
        RFRxForeignHomeID: 0 (11:53)
        priorityRoute: None (11:53)
            dstNodeId: None (11:53)
            routeType: None (11:53)
            speed: None (11:53)
            hops: None (11:53)
        jammingDetection: None (11:53)
            ch1Threshold: 127 (11:53)
            ch2Threshold: 127 (11:53)
            ch3Threshold: 127 (11:53)
            detected: 0 (11:53)
    homeName: (11:04)
    homeNotes: (11:04)
    S2RequireCSA: false (11:53)
    smartStart: None (11:04)
        requestFrom: None (11:53)
        dskProvisioningList: None (11:04)
        includingDSK: None (11:53)
I've also tried using Smart Start with Silabs PC Controller, but also no luck.
We really need this to be working so we can continue developing.

Thanks
User avatar
PoltoS
Posts: 7562
Joined: 26 Jan 2011 19:36

Re: UZB -> Missing Smart Start

Post by PoltoS »

In Smart Home UI you can use it. Also enable debug button in EUI and you will have access to Smart Start in EUI
brianaker
Posts: 55
Joined: 11 Nov 2016 16:57

Re: UZB -> Missing Smart Start

Post by brianaker »

acanadasSC wrote:
27 Dec 2019 15:02
None of them show any option to configure Smart Start anywhere in the UI
Goto "My Settings" in the Smart Home UI and select "Show beta functions"

After that you will find under Devices->Z-wave->manage the tab "Device Key List".

Under that tab your will find "Scan QR code", etc...
Post Reply