Page 1 of 1
Old ZMEEUZB1 firmware update
Posted: 15 Apr 2020 16:59
by FlangeMonkey
Hi Guys,
I'm looking to do a firmware update on my ZMEEUZB1, which was purchased back in 2017. Its the manual process and I cannot determine the current version. I'm executing ./ZMESerialUpdater serialapi_uzbupdate -d /dev/ttyACM0 and get the following output:
Code: Select all
/ZMESerialUpdater/x64# ./ZMESerialUpdater serialapi_uzbupdate -d /dev/ttyACM0
Z-WAVE Serial API Tool
Version:LWE0.9
by Z-WAVE>ME
-->
-->
-->
-->
-->
-->
-->
-->
Device ready in:8.63519310951 seconds
FULL INFO
Openning port .............................. OK
Error 0 returned ff for ACK
Error 1 returned ff for ACK
Error 2 returned ff for ACK
Error 3 Unknown exception:list index out of range
Any Idea's?
Thanks,
Re: Old ZMEEUZB1 firmware update
Posted: 15 Apr 2020 17:50
by FlangeMonkey
I ended up turning up a Pi and testing it. I can now pull the info.
Re: Old ZMEEUZB1 firmware update
Posted: 15 Apr 2020 19:43
by FlangeMonkey
I've managed to get up to version 5.7, I cannot seem to understand what updates are needed to get further up. I'm looking at the below link and there doesn't appear to be a path. If I look at "all" there appears to be a path, but I'm seeing references to 2 bootloaders and 2/3CH and different countries.
https://service.z-wave.me/expertui/uzb- ... tml?hw=277
Can someone please confirm I have this right:
From 5.5 to 5.6 (Done)
- bootloader_UZB_from_05_05_to_7278_2MB.bin
- firmware_UZB_from_05_05_to_05_06.bin
To 5.7 (Done)
- bootloader_UZB_from_05_06_to_7278_2MB.bin
- UPD_FIRMWARE_UZB500_from_05_06_to_05_07.bin
From 5.7 to 5.7/40196
- do I need "UPD_BOOTLOADER_UZB_ZME_05_07_04000001_9d04.bin", "bootloader_UZB_from_05_07_to_7278_2MB.bin" or nether because I'm on 7278.
- I'm in the EU do I need "UPD_FIRMWARE_UZB500_3CH_X_from05_07_to_UZB500_05_07.bin"? It appears to change from 3CH to what I already have?
From 5.7/40196 to 5.27/40196
- bootloader_UZB_from_05_07_to_7278_2MB.bin < again do I need this?
- UPD_FIRMWARE_UZB_STATIC_2ch_ZME_05_07_04000001_ZME_05_1b_04000001.bin
From 5.27 to 5.36
- UPD_FIRMWARE_UZB_STATIC_2ch_ZME_05_1b_04000001_ZME_05_24_04000001.bin
I feel I only need "UPD_FIRMWARE_UZB_STATIC_2ch_ZME_05_07_04000001_ZME_05_1b_04000001.bin" and then "UPD_FIRMWARE_UZB_STATIC_2ch_ZME_05_1b_04000001_ZME_05_24_04000001.bin"?
Thanks,
Re: Old ZMEEUZB1 firmware update
Posted: 15 Apr 2020 23:24
by rafale77
Yes you need to move to boot loader 40196 to go further.
Re: Old ZMEEUZB1 firmware update
Posted: 16 Apr 2020 02:36
by FlangeMonkey
Thanks for the reply, can you please clarify? When you say 40196 and bootloader do you mean, the bootloader I already have "bootloader_UZB_from_05_06_to_7278_2MB.bin" or this one "UPD_BOOTLOADER_UZB_ZME_05_07_04000001_9d04.bin" due to the matching 04000001?
Thanks,
edit: 9d04 is 40196 in decimal, so I need bootloader: UPD_BOOTLOADER_UZB_ZME_05_07_04000001_9d04.bin??????
Re: Old ZMEEUZB1 firmware update
Posted: 16 Apr 2020 09:23
by rafale77
Correct!
Re: Old ZMEEUZB1 firmware update
Posted: 27 Apr 2020 03:35
by PoltoS
