Discussions about Z-Way software and Z-Wave technology in general
lanbrown
Posts: 291 Joined: 01 Jun 2021 08:06
Post
by lanbrown 31 May 2022 03:23
It seems there are quite a few complaints about the Leviton DZ15S switches and not updating their status.
Here is the same issue in Hubitat:
https://community.hubitat.com/t/zwave-s ... at/66019/5
One solution provided:
Ok, I found a post of someone with a similar problem which (s)he solved by turning off then on the circuit breaker for that switch. What do you know. It worked. Sure like to understand why though and why only the status updates were not working.
SmartThings:
https://community.smartthings.com/t/pro ... /21?page=2
HomeSeer:
https://forums.homeseer.com/forum/homes ... ant-status
So multiple home automation platforms all have the same issue with the same brand and model switches. So it seems like the prudent thing to do would be for @DisneyJoe to work directly with Leviton. Maybe there is a firmware update available. Given how old the Z-Way release you were running, chances are the switches have never been updated.
disneyjoe7
Posts: 29 Joined: 02 Oct 2016 04:15
Post
by disneyjoe7 31 May 2022 22:46
Hmm Don't know I'm a fan of Leviton switches and outlets don't use anything else. And would state was never issue with Razberryme 2 but had an issue with that equipment and 3.2.3 software. Got many of them so that would be a big issue. Not that I think Leviton and Z-wave love themselves, think things better. But then redoing all switches and outlets was better if I did a factory default first then inclusion update. Taking a 25min problem into a 90 seconds issue. So maybe it was a pilot issue and not a Leviton / Z-wave problem.
disneyjoe7
Posts: 29 Joined: 02 Oct 2016 04:15
Post
by disneyjoe7 31 May 2022 23:12
well turning circuits off waited for 2 mins then back on same issue. If looking on a Laptop and looking at Z-wave website. Can turn on light via screen and it states green ON or OFF if I used the screen website. Website screen of Z-wave doesn't see if the switch / light was turned ON or OFF was turned on manual.
disneyjoe7
Posts: 29 Joined: 02 Oct 2016 04:15
Post
by disneyjoe7 01 Jun 2022 06:19
[2022-05-31 22:59:00.103]
[core] --- Daylight_30 performCommand processing: {"0":"update"} [zway] Adding job: Get background noise level [zway] Adding job: Get background noise level [zway] Job 0x3b (Get background noise level): RSSI Ch#1: -88 dBm, Ch#2: -90 dBm, Ch#3: -90 dBm [zway] Removing job: Get background noise level [core] --- ZWayVDev_zway_11-0-37 performCommand processing: {"0":"off"} [zway] Adding job: SwitchBinary Set to node 11 [zway] Adding job: SwitchBinary Get to node 11 [core] --- ZWayVDev_zway_8-0-37 performCommand processing: {"0":"off"} [zway] Adding job: SwitchBinary Set to node 8skohlman1@att.net skohlman1@att.net https://service.z-wave.me/emailnotifica ... ested-With , content-type","Access-Control-Allow-Methods":"POST, GET, PUT, DELETE, OPTIONS","Access-Control-Allow-Origin":"*","Connection":"close","Content-Length":"0","Content-Type":"text/html; charset=UTF-8","Date":"Wed, 01 Jun 2022 03:00:11 GMT","Server":"Apache/2.4.18 (Ubuntu)"},"contentType":"text/html","data":""}skohlman1@att.net
lanbrown
Posts: 291 Joined: 01 Jun 2021 08:06
Post
by lanbrown 01 Jun 2022 07:42
[2022-05-31 23:00:00.611] [W] [zway] Got unsecure packet from device 9, but Command Class 0x82 Hail is marked as secure and not present in unsecure NIF. Ignoring packet.
Z-Way developers know of that issue and will have a fix in a future release.
shurpsur
Posts: 2 Joined: 25 Oct 2022 14:36
Post
by shurpsur 25 Oct 2022 14:55
I have the Z-Wave integration set up, but when I attempt to include a device, nothing happens. The one device that seems to have communicated with the RazBerry seems to have failed to provide any info in the interview.
shurpsur
Posts: 2 Joined: 25 Oct 2022 14:36
Post
by shurpsur 26 Oct 2022 15:52
Did a factory reset for a outlet got in programmed to see this outlet can turn on or off via on-screen but the same issue if I turn on or off outlet via button on outlet (outside of on-screen) doesn't see my state either on or off of that device.
get-vidmate.com instasave
micky1500
Posts: 298 Joined: 07 Feb 2016 16:29Location: England
Post
by micky1500 26 Oct 2022 19:54
Sorry shurpsur.
Raspi 4 - (Buster - 32 Bit) Zwave Version 4.1.1, Raz 7 Pro, Serial API Version: 07.38
