Schneider Electic wall controller support

[justiina99]

I have small problem. Zwave device, introducing itself as:

Brand CONNECT
Product 5052xx
Description Battery Powered Dual Wall Controller
Command Class Basic, Configuration, ManufacturerSpecific, Association, Version, MultiChannelAssociation,

is sending following data according zway-server log files. User interface (v2.2.2) is not able to handle it and expert UI is showing some data but cannot be used to create homeautomation functions.

Left button ON:
[D] [zway] RECEIVED: ( 01 0C 00 04 00 07 06 60 06 01 20 01 FF 4F )
[D] [zway] SENT ACK
[D] [zway] SETDATA devices.7.data.lastReceived = 0 (0x00000000)
[D] [zway] SETDATA devices.1.instances.1.commandClasses.32.data.srcNodeId = 7 (0x00000007)
[D] [zway] SETDATA devices.1.instances.1.commandClasses.32.data.srcInstanceId = 1 (0x00000001)
[D] [zway] SETDATA devices.1.instances.1.commandClasses.32.data.level = 255 (0x000000ff)

Left button OFF:
[D] [zway] RECEIVED: ( 01 0C 00 04 00 07 06 60 06 01 20 01 00 B0 )
[D] [zway] SENT ACK
[D] [zway] SETDATA devices.7.data.lastReceived = 0 (0x00000000)
[D] [zway] SETDATA devices.1.instances.1.commandClasses.32.data.srcNodeId = 7 (0x00000007)
[D] [zway] SETDATA devices.1.instances.1.commandClasses.32.data.srcInstanceId = 1 (0x00000001)
[D] [zway] SETDATA devices.1.instances.1.commandClasses.32.data.level = 0 (0x00000000)

Right button ON:
[D] [zway] RECEIVED: ( 01 0C 00 04 00 07 06 60 06 03 20 01 FF 4D )
[D] [zway] SENT ACK
[D] [zway] SETDATA devices.7.data.lastReceived = 0 (0x00000000)
[D] [zway] SETDATA devices.1.instances.3.commandClasses.32.data.srcNodeId = 7 (0x00000007)
[D] [zway] SETDATA devices.1.instances.3.commandClasses.32.data.srcInstanceId = 3 (0x00000003)
[D] [zway] SETDATA devices.1.instances.3.commandClasses.32.data.level = 255 (0x000000ff)

Right button OFF:
[D] [zway] RECEIVED: ( 01 0C 00 04 00 07 06 60 06 03 20 01 00 B2 )
[D] [zway] SENT ACK
[D] [zway] SETDATA devices.7.data.lastReceived = 0 (0x00000000)
[D] [zway] SETDATA devices.1.instances.3.commandClasses.32.data.srcNodeId = 7 (0x00000007)
[D] [zway] SETDATA devices.1.instances.3.commandClasses.32.data.srcInstanceId = 3 (0x00000003)
[D] [zway] SETDATA devices.1.instances.3.commandClasses.32.data.level = 0 (0x00000000)


How to finetune / modify zway-server to allow device to be used as binary switch or controller or any other format what might be suitable to input on/off signal for example to if/then module?

Background for this case is that there are not so many on/off wall switch available, which can be nicely integrated with existing interior and Schneider Electric seems to be only one in Europe currently with that (old) device.

[justiina99]

Issue solved.

After data was visible in logs, used 'Trap events from Remotes and Sensors' app to generate corresponding devices, which was then attached to other apps.