tellstick

Discussions about RaZberry - Z-Wave board for Raspberry computer
Varazir
Posts: 19
Joined: 18 Feb 2015 15:37

Re: tellstick

Post by Varazir »

pofs wrote:There's no any specific driver for RaZberry, it uses a built-in serial port driver.
It must be something to do with your Linux distrib, probably you should upgrade to the latest version.
Okay, and you haven't seen this problem before?
I'm running Domoticz, I'll try theirs forum again.

Daniel

pofs
Posts: 688
Joined: 25 Mar 2011 19:03

Re: tellstick

Post by pofs »

I actually have neither Raspberry Pi nor Tellstick, so I haven't seen this :)
I'd start with system logs, probably it is some Raspbian issue.

Varazir
Posts: 19
Joined: 18 Feb 2015 15:37

Re: tellstick

Post by Varazir »

pofs wrote:I actually have neither Raspberry Pi nor Tellstick, so I haven't seen this :)
I'd start with system logs, probably it is some Raspbian issue.
Found the problem, it was that I had specified the /Dev/USB0 in the tellstick config file. Removed that and now all is working as it should.

Mirar
Posts: 113
Joined: 19 Oct 2014 16:54
Location: Stockholm

Re: tellstick

Post by Mirar »

[quote="Varazir"]

Code: Select all

2015-03-01 16:09:52.983 Error, ERROR: Cannot open serial port /dev/ttyUSB0. Error code 2
2015-03-01 16:09:52.983 Error, ERROR: Failed to open serial port /dev/ttyUSB0
I didn't have any problem having both the tellstick and the Razberry on the same Pi or Pi 2.
My z-way-server is using /dev/ttyAMA0 for Razberry on Pi 2.

With a 2.1A I didn't have power problems running the Tellstick on the USB port of the Pi2. (But the power supply itself turned out wonky, so now the Pi 2 is on the old 0.5A.)

(I have moved the Tellstick back to the old Pi.)

Varazir
Posts: 19
Joined: 18 Feb 2015 15:37

Re: tellstick

Post by Varazir »

I bought a Raspberry USB hub, that solved my power problem.

LOCOSP
Posts: 29
Joined: 22 Sep 2013 02:33

Re: tellstick

Post by LOCOSP »

Is it possible to control tellstick via razberry?

Because i have both devices but would be great to controll both via z-wave.me UI

Varazir
Posts: 19
Joined: 18 Feb 2015 15:37

Re: tellstick

Post by Varazir »

LOCOSP wrote:Is it possible to control tellstick via razberry?

Because i have both devices but would be great to controll both via z-wave.me UI
No you have to have tellstick usb/network device. ( far as I know )

LOCOSP
Posts: 29
Joined: 22 Sep 2013 02:33

Re: tellstick

Post by LOCOSP »

Varazir wrote:
LOCOSP wrote:Is it possible to control tellstick via razberry?

Because i have both devices but would be great to controll both via z-wave.me UI
No you have to have tellstick usb/network device. ( far as I know )
I understand that, I have tellstick, but is it possible to control it with SmartHome UI and apps ?

Varazir
Posts: 19
Joined: 18 Feb 2015 15:37

Re: tellstick

Post by Varazir »

LOCOSP wrote:
Varazir wrote:
LOCOSP wrote:Is it possible to control tellstick via razberry?

Because i have both devices but would be great to controll both via z-wave.me UI
No you have to have tellstick usb/network device. ( far as I know )
I understand that, I have tellstick, but is it possible to control it with SmartHome UI and apps ?
I'm running Domoticz on my raspberryPI with a razberry board and a tellstick. Works great. But you may need to buy a USB hub. I have the official USB hub for raspberry pi.

remoticz
Posts: 45
Joined: 07 Oct 2015 20:35
Location: no

Re: tellstick

Post by remoticz »

Varazir wrote:I'm running Domoticz on my raspberryPI with a razberry board and a tellstick. Works great.
Do you use Domoticz with Zway, or with OpenZwave?
v2.1.1 raspi2

Post Reply