forum

Posted: **09 Jul 2016 11:26**

Hello together,

now i change my board from pi to pi 3 and only have troubles! I have added two danfoss and one fibaro multi motion sensor. All devices are added into the system.

First issue:

Motion Sensor not in real time. I can move my body in front of the sensor and the sensor will give me a feedback with blink short time led. But nothing happens in UI. When i track realtime the log nothing happens.
But i get data, sometimes. Temp data and lux data will received sometimes. The virtual button stay only to on position and don't switch of any more... Before i get movment and this button in real time switch on after short period it switch off by itself. This seems be dead.

I try to setup the values via Expert UI like this before: https://forum.z-wave.me/viewtopic.php?f=3422&t=23473

Dont work. I get this:

With my old board i can set the values now i can set a parameter but the values are wrong.

Second issue:

if i change the danfoss temperature to another value nothing will be send to z way. If i set temp with ui it takes many many time to send this new set things to danfoss thermostates.

There must be a strange bug in it now! It's a new system now. I'll tried all out. Reset, Restore, Set back controller...

How can i fix this???

Posted: **09 Jul 2016 16:05**

Update: Seems that data will be send. Timeline give me Feedback all Data what i need. But Dashboard will not refresh.

CommandClass still red.

Posted: **10 Jul 2016 10:23**

OK... After restart of daemon the service runs fine. I get fresh new data and UI will refresh, too. That seems that z-way-server stops working with unkown issue. That's bad... This are the transition between working and not working:

Code: Select all

[2016-07-09 20:21:49.049] [I] [core] Notification: device-info (device-OnOff): {"dev":"Fibar Group (4.1.1) Button","l":"off"}
[2016-07-09 20:21:49.069] [I] [core] Notification: device-info (device-OnOff): {"dev":"Fibar Group (4.1.1) Button","l":"off"}
[2016-07-09 20:21:49.085] [I] [core] Notification: device-info (device-OnOff): {"dev":"Fibar Group (4.1.1) Button","l":"off"}
[2016-07-09 20:21:49.091] [I] [core] Notification: device-info (device-OnOff): {"dev":"Fibar Group (4.1.1) Button","l":"off"}
[2016-07-10 00:00:00.359] [I] [core] ---  ZWayVDev_zway_2-0-128 performCommand processing: {"0":"update"}
[2016-07-10 00:00:00.360] [I] [zway] Adding job: Battery Get
[2016-07-10 00:00:00.360] [I] [core] ---  ZWayVDev_zway_3-0-128 performCommand processing: {"0":"update"}
[2016-07-10 00:00:00.361] [I] [zway] Adding job: Battery Get
[2016-07-10 00:00:00.361] [I] [core] ---  ZWayVDev_zway_4-0-128 performCommand processing: {"0":"update"}
[2016-07-10 00:00:00.361] [I] [zway] Adding job: Battery Get
[2016-07-10 00:00:00.362] [I] [core] ---  ZWayVDev_zway_2-0-128 performCommand processing: {"0":"update"}
[2016-07-10 00:00:00.362] [D] [zway] Job 0x13 (Battery Get): removing duplicate
[2016-07-10 00:00:00.362] [I] [core] ---  ZWayVDev_zway_3-0-128 performCommand processing: {"0":"update"}
[2016-07-10 00:00:00.363] [D] [zway] Job 0x13 (Battery Get): removing duplicate
[2016-07-10 00:00:00.363] [I] [core] ---  ZWayVDev_zway_4-0-128 performCommand processing: {"0":"update"}
[2016-07-10 00:00:00.363] [D] [zway] Job 0x13 (Battery Get): removing duplicate
[2016-07-10 09:09:24.022] [I] [core] Executing script: exit()
[2016-07-10 09:09:24.288] [D] [zway] Worker thread exit point
[2016-07-10 09:09:24.288] [D] [zway] Worker thread successfully finished

Posted: **10 Jul 2016 18:20**

Start Issue now:

https://github.com/Z-Wave-Me/home-automation/issues/360

Posted: **11 Jul 2016 18:28**

@Admins please close this thread. That we have a general thread for fibaro motion sensor:

https://forum.z-wave.me/viewtopic.php?f ... 884#p62884

Thanks

[Done pz1]

forum

No Receiving Data No UI Update

No Receiving Data No UI Update

Re: No Receiving Data No UI Update

Re: No Receiving Data No UI Update

Re: No Receiving Data No UI Update

Re: No Receiving Data No UI Update