Aeotec WallMote Quad (good) vs NanoMote Quad (help!)

Discussions about RaZberry - Z-Wave board for Raspberry computer
Post Reply
pgdharman
Posts: 9
Joined: 04 Jan 2017 19:34

Aeotec WallMote Quad (good) vs NanoMote Quad (help!)

Post by pgdharman »

Hi, I've got RaZberry 3.2.1 (app 1.3, sdk 6.71.01)with firmware 5.39 working fine with the Aeotec WallMote Quad (hereafter WMQ), but I've just bought a Aeotec NanoMote Quad (hereafter NMQ) which includes, but then fails to talk. I opted for the S2 unauthenticated during inclusion, and the initial interview seemed to work just fine...
Screenshot 2021-11-24 at 23.04.05.png
Screenshot 2021-11-24 at 23.04.05.png (72.14 KiB) Viewed 3223 times
However, after inclusion nothing happens. Zniffer doesn't see any further communitcation. I'm wondering if the device didn't honour my request for no unauthentication?
Screenshot 2021-11-24 at 23.14.50.png
Screenshot 2021-11-24 at 23.14.50.png (118.41 KiB) Viewed 3223 times
I also note that the WMQ installed a Lifeline association to Z-Way, but there is not such association with for the NMQ. Indeed, if I try to add one, I get an error ...
Screenshot 2021-11-24 at 23.11.35.png
Screenshot 2021-11-24 at 23.11.35.png (89.8 KiB) Viewed 3223 times
The controller queue seems to be stuck waiting for stuff, even when I put the device into "Long Wakeup" mode...
Screenshot 2021-11-24 at 22.09.56.png
Screenshot 2021-11-24 at 22.09.56.png (306.03 KiB) Viewed 3223 times
Help!
User avatar
PoltoS
Posts: 7565
Joined: 26 Jan 2011 19:36

Re: Aeotec WallMote Quad (good) vs NanoMote Quad (help!)

Post by PoltoS »

I think if you look in the log, it will complain. Please show the log
pgdharman
Posts: 9
Joined: 04 Jan 2017 19:34

Re: Aeotec WallMote Quad (good) vs NanoMote Quad (help!)

Post by pgdharman »

PoltoS wrote:
26 Nov 2021 05:15
I think if you look in the log, it will complain. Please show the log
Here's an extract of the full log from the first interaction with node 27 to the last.
z-way-server.log.extract.gz
(40.91 KiB) Downloaded 172 times
User avatar
PoltoS
Posts: 7565
Joined: 26 Jan 2011 19:36

Re: Aeotec WallMote Quad (good) vs NanoMote Quad (help!)

Post by PoltoS »

Hard to say - the device explicitly reported that the Association.Set failed.

[2021-11-25 00:00:19.554] [zway] Node 27:0 CC SecurityS2: passing S2 Unauthenticated decrypted packet to application level: [ 6c 02 04 02 00 ]

There is nothing we can do, please contact the manufacturer.
pgdharman
Posts: 9
Joined: 04 Jan 2017 19:34

Re: Aeotec WallMote Quad (good) vs NanoMote Quad (help!)

Post by pgdharman »

I'm still discussing this with Aeotec. They've asked me to try an insecure mode. One thing that has emerged is that during inclusion in the Expert UI (for some reason, I've always used this, not the SmartHome UI for inclusion since I started 4+ years ago), if try to use the S0 or S2 Unauthenticated modes, the interview phase never completes (no response for Security and SecurityS2).

I have recorded a few videos of inclusion attempts in the Expert UI...

https://share.icloud.com/photos/0-NIv75 ... vYgAdcUsWg

Note: this link will expire in a month.
User avatar
PoltoS
Posts: 7565
Joined: 26 Jan 2011 19:36

Re: Aeotec WallMote Quad (good) vs NanoMote Quad (help!)

Post by PoltoS »

Use S2 mode and please provide us the log of the inclusion
Post Reply