RaZberry HAT & Bullseye

Discussions about RaZberry - Z-Wave board for Raspberry computer
Post Reply
simonagjerner
Posts: 1
Joined: 20 Jan 2023 14:11

RaZberry HAT & Bullseye

Post by simonagjerner »

Hi Everyone,

I just got my RockPi4. It works fine so far and I use it as a server for my smarthome.
It has Dietpi installed, which is based on Debian Bullseye.

Now the problem:
I’d like to use a RaZberry-HAT, which is for Z-Wave.
But when I attach the hat, the RockPi will not boot-up. I found this to be a well-known problem.
(See here: https://wiki.radxa.com/Rockpi4/hardware/HATs 8)

Obviously I need to tweak my config, but here is the problem:

There is no suitable repository for Bullseye :frowning:

Do you guys have any idea how I could make this work with any other steps or what else I could do? This is a discussion that the a.m. link refers to: Configuring kernel before building 3)

Any help would be much appreciated!

Regards,
Simona
User avatar
PoltoS
Posts: 7562
Joined: 26 Jan 2011 19:36

Re: RaZberry HAT & Bullseye

Post by PoltoS »

You need to disable the serial console as stated on that page. Do it before installing RaZberry as otherwise, it will prevent the system to boot (on boot the kernel will try to talk with RaZberry, but RaZberry won't understand that).
Post Reply