Razberry Pro Firmware / SDK

[thaui]

@ScottR already used 'all' no update at all.
@PoltoS what is the last available update?

[ScottR]

@Thaui.
This worked for me with the latest Z-Way v4.1.1 release and was able to update to 7.38.

[thaui]

@ScottR thanks for the reply. I have used z-way version 3.xx. maybe I need to update to 4.1.1. will try and give my feedback.

[thaui]

@ScottR I updated z-way to 4.1.1 and the firmware update for the Razberry pro to 7.38 worked well. Thanks for you input

[lp2067]

I have the same issue ever since the upgrade to the new firmware.

Need to do a full power off to restore functioning, reboot won’t cut it.

If you are interested in logs please let me know which ones you are interested in.

Same issues. After few hours of work there are
"Error returned from _zway_cc_call_handler(zway, device->default_instance, NODE_BROADCAST, 0, data[4 + L], &data[5 + L]): Wrong packet from Z-Wave network or Discovery got bad data (stick communication failed) (-9)"
then
"Got frame from device XX to controller, but device is not registered - do re-inclusion" for non-existing devices
then devices are marked as dead...

Reboot Raspberry does nothing. Only power cycle works.
Your firmware version are worse and worse...

[lp2067]

Reverted to Razberry 2 - works without problems.
Who got problems - do the same.
EOT.

[harre]

Reverted to Razberry 2 - works without problems.
Who got problems - do the same.
EOT.

I'll try my old razzberry and see how it behaves. It's a bit sad that stuff that have worked for years just stop working and then when reporting issues with logs nothing more happens.

[Gaby]

I am running 7.36 [Bootloader: 65535] and want to upgrade to 7.38. when I type 'all' in access token field I do not get the choice of 7.38, any hint?

[PoltoS]

What is your hardware? It is strange that the bootloader is 65535... Please let me know the uuid of the hardware (you can see it in Z-Way Controller Info page)

[Gaby]

Razberry 7 Pro on Raspberry 4B 8GB, FW: v7.36 SDK: v7.19.2