forum

Posted: **23 Oct 2014 09:58**

Hi,
This is my first Z-wave sensor and I try to setup with my RaZberry.

: Z-Way version; Z-Way version.png (28.24 KiB) Viewed 6190 times

: FGMS-001 Device description; Z-Way FGMS-001 device description.png (74.65 KiB) Viewed 6190 times

: FGMS-001 device status; Z-Way FGMS-001 Device Status.png (13.69 KiB) Viewed 6190 times

I don't know why the FGMS-001 did not wake up every 600s , any idea?

Thanks.

Vic.

Posted: **23 Oct 2014 10:31**

In your device description (second image) I do miss the lower part. There should be something under the heading of wake-up notifications.

Posted: **23 Oct 2014 10:48**

Hi,

Here the the wakeup notification.

: wakeup notification; Z-Way wakeup notification.png (10.26 KiB) Viewed 6183 times

Posted: **23 Oct 2014 10:55**

Well you did specify a wake-up interval of 300 seconds there. That is exactly the 5 minutes that is shown in your staus report.
Do enter 600 in this box, and push the Apply configuration for this device button. After the next cycle you should see the new interval in your status

forum

Fibaro FGMS-001 not automatically wakeup

Fibaro FGMS-001 not automatically wakeup

Re: Fibaro FGMS-001 not automatically wakeup

Re: Fibaro FGMS-001 not automatically wakeup

Re: Fibaro FGMS-001 not automatically wakeup