ZME_WALLC-S scenes with razberry
Posted: 30 Jan 2015 13:25
Hi,
I'm trying to get my razberry to execute scenes with my ZME_WALLC-S.
First some info about my setup:
- Groups are controlled with two buttons (parameter 1/2 = 1)
- Command to Control Group A, Parameter Number 11 = 1, work great with my dimmer.
- Command to Control Group B Parameter Number 12 = 8,
- I've checked associations for my wall controller and the razberry is associated with the life life group.
- Trap events from Remotes and Sensors module enabled, seeing 2 buttons (on / off), only available in the z-way-ha dashboard.
Some output when I push buttons for group B (in Central Scene to Gateway mode)
I already searched the forum and saw some info about SwitchControl viewtopic.php?f=3419&t=21112. I enabled this module, after pushing add item in "List of remotes and switches to instantiate", I got 2 buttons. The buttons only show up in dashboard menu, if I go to preferences they don't exist under the widget menu.
Now I'm stuck how to "program" / assign scenes to the switchcontrol buttons. It is possible via the z-way-ha dashboard? For example pushing button 3, I want to open the door and switch on the light.
Can somebody point me in the right direction to get my wall controller to work and assign scenes to it?
I'm trying to get my razberry to execute scenes with my ZME_WALLC-S.
First some info about my setup:
- Groups are controlled with two buttons (parameter 1/2 = 1)
- Command to Control Group A, Parameter Number 11 = 1, work great with my dimmer.
- Command to Control Group B Parameter Number 12 = 8,
- I've checked associations for my wall controller and the razberry is associated with the life life group.
- Trap events from Remotes and Sensors module enabled, seeing 2 buttons (on / off), only available in the z-way-ha dashboard.
Some output when I push buttons for group B (in Central Scene to Gateway mode)
Code: Select all
[2015-01-29 20:53:22.219] [D] [zway] RECEIVED: ( 01 29 00 04 00 08 23 98 81 72 48 E6 CC 47 DD F6 5A D2 C9 BC 56 04 23 DB B7 79 9A D6 0A 26 46 23 97 DE 50 3D 14 C2 B0 F1 7E 4E 83 )
[2015-01-29 20:53:22.221] [D] [zway] SENT ACK
[2015-01-29 20:53:22.222] [D] [zway] SETDATA devices.8.data.lastReceived = 0 (0x00000000)
[2015-01-29 20:53:22.223] [I] [zway] Node 8:0 CC Security: Received a secure message
[2015-01-29 20:53:22.225] [D] [zway] SETDATA devices.8.instances.0.commandClasses.152.data.firstPart = **********
[2015-01-29 20:53:22.226] [I] [zway] Node 8:0 CC Security: passing decrypted packet to application level: [ 8f 01 02 05 5b 03 54 02 02 05 5b 03 55 01 02 ]
[2015-01-29 20:53:22.228] [D] [zway] SETDATA devices.8.instances.0.commandClasses.91.data.sequence = **********
[2015-01-29 20:53:22.229] [D] [zway] SETDATA devices.1.instances.0.commandClasses.91.data.srcNodeId = 8 (0x00000008)
[2015-01-29 20:53:22.230] [D] [zway] SETDATA devices.1.instances.0.commandClasses.91.data.srcInstanceId = 0 (0x00000000)
[2015-01-29 20:53:22.232] [D] [zway] SETDATA devices.1.instances.0.commandClasses.91.data.keyAttribute = 2 (0x00000002)
[2015-01-29 20:53:22.233] [D] [zway] SETDATA devices.1.instances.0.commandClasses.91.data.currentScene = 2 (0x00000002)
[2015-01-29 20:53:22.234] [D] [zway] SETDATA devices.8.instances.0.commandClasses.91.data.keyAttribute = 2 (0x00000002)
[2015-01-29 20:53:22.236] [D] [zway] SETDATA devices.8.instances.0.commandClasses.91.data.currentScene = 2 (0x00000002)
[2015-01-29 20:53:22.236] [D] [zway] SETDATA devices.8.instances.0.commandClasses.91.data.sequence = **********
[2015-01-29 20:53:22.237] [D] [zway] SETDATA devices.1.instances.0.commandClasses.91.data.srcNodeId = 8 (0x00000008)
[2015-01-29 20:53:22.239] [D] [zway] SETDATA devices.1.instances.0.commandClasses.91.data.srcInstanceId = 0 (0x00000000)
[2015-01-29 20:53:22.239] [D] [zway] SETDATA devices.1.instances.0.commandClasses.91.data.keyAttribute = 1 (0x00000001)
[2015-01-29 20:53:22.240] [D] [zway] SETDATA devices.1.instances.0.commandClasses.91.data.currentScene = 2 (0x00000002)
[2015-01-29 20:53:22.241] [D] [zway] SETDATA devices.8.instances.0.commandClasses.91.data.keyAttribute = 1 (0x00000001)
[2015-01-29 20:53:22.242] [D] [zway] SETDATA devices.8.instances.0.commandClasses.91.data.currentScene = 2 (0x00000002)
[2015-01-29 20:53:23.585] [D] [zway] RECEIVED: ( 01 1F 00 04 00 08 19 98 81 95 BE C8 3A 00 42 06 D0 C7 B9 4D B8 E8 FB C1 DB C9 D5 68 52 96 91 23 21 )
[2015-01-29 20:53:23.586] [D] [zway] SENT ACK
[2015-01-29 20:53:23.587] [D] [zway] SETDATA devices.8.data.lastReceived = 0 (0x00000000)
[2015-01-29 20:53:23.588] [I] [zway] Node 8:0 CC Security: Received a secure message
[2015-01-29 20:53:23.589] [D] [zway] SETDATA devices.8.instances.0.commandClasses.152.data.firstPart = **********
[2015-01-29 20:53:23.590] [I] [zway] Node 8:0 CC Security: passing decrypted packet to application level: [ 5b 03 56 02 06 ]
[2015-01-29 20:53:23.590] [D] [zway] SETDATA devices.8.instances.0.commandClasses.91.data.sequence = **********
[2015-01-29 20:53:23.591] [D] [zway] SETDATA devices.1.instances.0.commandClasses.91.data.srcNodeId = 8 (0x00000008)
[2015-01-29 20:53:23.592] [D] [zway] SETDATA devices.1.instances.0.commandClasses.91.data.srcInstanceId = 0 (0x00000000)
[2015-01-29 20:53:23.593] [D] [zway] SETDATA devices.1.instances.0.commandClasses.91.data.keyAttribute = 2 (0x00000002)
[2015-01-29 20:53:23.593] [D] [zway] SETDATA devices.1.instances.0.commandClasses.91.data.currentScene = 6 (0x00000006)
[2015-01-29 20:53:23.594] [D] [zway] SETDATA devices.8.instances.0.commandClasses.91.data.keyAttribute = 2 (0x00000002)
[2015-01-29 20:53:23.595] [D] [zway] SETDATA devices.8.instances.0.commandClasses.91.data.currentScene = 6 (0x00000006)
Now I'm stuck how to "program" / assign scenes to the switchcontrol buttons. It is possible via the z-way-ha dashboard? For example pushing button 3, I want to open the door and switch on the light.
Can somebody point me in the right direction to get my wall controller to work and assign scenes to it?