Aeotec Aeon Labs Multisensor

[Mirar]

All my Aeon Labs Multisensors behave. (All run 1.18.)

I noticed this phenomenon today. The z-way-server really hates sensor 3 and 5 from one of the sensors,
but not the other one:

Code: Select all

[2015-02-06 23:44:33.671] [D] [zway] RECEIVED: ( 01 09 00 04 00 02 03 80 03 64 14 )
[2015-02-06 23:44:33.672] [D] [zway] SENT ACK
[2015-02-06 23:44:33.672] [D] [zway] SETDATA devices.2.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:44:33.672] [D] [zway] SETDATA devices.2.instances.0.commandClasses.128.data.history.100 = 1423262673 (0x54d543d1)
[2015-02-06 23:44:33.672] [D] [zway] SETDATA devices.2.instances.0.commandClasses.128.data.last = 100 (0x00000064)
[2015-02-06 23:44:33.703] [D] [zway] RECEIVED: ( 01 0C 00 04 00 02 06 31 05 03 0A 01 18 D7 )
[2015-02-06 23:44:33.704] [D] [zway] SENT ACK
[2015-02-06 23:44:33.704] [D] [zway] SETDATA devices.2.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:44:33.705] [W] [zway] Node 2:0 CC SensorMultilevel: Unsupported sensor type 3 received, ignoring
[2015-02-06 23:44:33.734] [D] [zway] RECEIVED: ( 01 0C 00 04 00 02 06 31 05 05 01 21 00 E2 )
[2015-02-06 23:44:33.735] [D] [zway] SENT ACK
[2015-02-06 23:44:33.735] [D] [zway] SETDATA devices.2.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:44:33.735] [W] [zway] Node 2:0 CC SensorMultilevel: Unsupported sensor type 5 received, ignoring
[2015-02-06 23:44:33.765] [D] [zway] RECEIVED: ( 01 0C 00 04 00 02 06 31 05 01 22 00 EA 0E )
[2015-02-06 23:44:33.765] [D] [zway] SENT ACK
[2015-02-06 23:44:33.765] [D] [zway] SETDATA devices.2.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:44:33.766] [D] [zway] SETDATA devices.2.instances.0.commandClasses.49.data.1.deviceScale = 0 (0x00000000)
[2015-02-06 23:44:33.767] [D] [zway] SETDATA devices.2.instances.0.commandClasses.49.data.1.scale = 0 (0x00000000)
[2015-02-06 23:44:33.767] [D] [zway] SETDATA devices.2.instances.0.commandClasses.49.data.1.val = 23.400000
[2015-02-06 23:44:33.770] [D] [zway] SETDATA devices.2.instances.0.commandClasses.49.data.1.scaleString = "°C"
[2015-02-06 23:44:33.771] [D] [zway] SETDATA devices.2.instances.0.commandClasses.49.data.1 = Empty

The next multisensor is fine:

Code: Select all

[2015-02-06 23:46:07.384] [D] [zway] RECEIVED: ( 01 09 00 04 00 03 03 80 03 64 15 )
[2015-02-06 23:46:07.385] [D] [zway] SENT ACK
[2015-02-06 23:46:07.385] [D] [zway] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:46:07.385] [D] [zway] SETDATA devices.3.instances.0.commandClasses.128.data.history.100 = 1423262767 (0x54d5442f)
[2015-02-06 23:46:07.385] [D] [zway] SETDATA devices.3.instances.0.commandClasses.128.data.last = 100 (0x00000064)
[2015-02-06 23:46:07.414] [D] [zway] RECEIVED: ( 01 09 00 04 00 03 03 80 03 64 15 )
[2015-02-06 23:46:07.415] [D] [zway] SENT ACK
[2015-02-06 23:46:07.415] [D] [zway] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:46:07.415] [D] [zway] SETDATA devices.3.instances.0.commandClasses.128.data.history.100 = 1423262767 (0x54d5442f)
[2015-02-06 23:46:07.415] [D] [zway] SETDATA devices.3.instances.0.commandClasses.128.data.last = 100 (0x00000064)
[2015-02-06 23:46:07.445] [D] [zway] RECEIVED: ( 01 0C 00 04 00 03 06 31 05 03 0A 00 15 DA )
[2015-02-06 23:46:07.445] [D] [zway] SENT ACK
[2015-02-06 23:46:07.446] [D] [zway] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:46:07.446] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.3.deviceScale = 1 (0x00000001)
[2015-02-06 23:46:07.446] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.3.scale = 1 (0x00000001)
[2015-02-06 23:46:07.446] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.3.val = 21.000000
[2015-02-06 23:46:07.460] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.3.scaleString = "Lux"
[2015-02-06 23:46:07.460] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.3 = Empty
[2015-02-06 23:46:07.481] [D] [zway] RECEIVED: ( 01 0C 00 04 00 03 06 31 05 05 01 1C 00 DE )
[2015-02-06 23:46:07.481] [D] [zway] SENT ACK
[2015-02-06 23:46:07.481] [D] [zway] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:46:07.482] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.5.deviceScale = 0 (0x00000000)
[2015-02-06 23:46:07.482] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.5.scale = 0 (0x00000000)
[2015-02-06 23:46:07.482] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.5.val = 28.000000
[2015-02-06 23:46:07.485] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.5.scaleString = "%"
[2015-02-06 23:46:07.486] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.5 = Empty
[2015-02-06 23:46:07.512] [D] [zway] RECEIVED: ( 01 0C 00 04 00 03 06 31 05 01 22 00 DE 3B )
[2015-02-06 23:46:07.513] [D] [zway] SENT ACK
[2015-02-06 23:46:07.513] [D] [zway] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:46:07.513] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.1.deviceScale = 0 (0x00000000)
[2015-02-06 23:46:07.514] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.1.scale = 0 (0x00000000)
[2015-02-06 23:46:07.514] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.1.val = 22.200001
[2015-02-06 23:46:07.517] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.1.scaleString = "°C"
[2015-02-06 23:46:07.518] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.1 = Empty

Can anyone spot what the problem is with the package? I don't get it. (It stopped working about 16:00 today, with a bad luminescence packet of 580470 lux.)

[Mirar]

I think something made z-way-server forgot that the multisensor has those sensors. I'm not sure when it happened, just that my parts stopped getting a good reading at some point.

[fableman]

I have one AEOTEC multisensor

When you include it it will report from all sensors but it will only do this one time.

This unit is not working with razpberry.Z like it should.

Iam running: razberry.z-wave.me/install/v2.0.1-rc16

I tried the expert commands without any luck, and get errors when trying.

anyone please help..

[thaui]

I really recommend a compatibility page which devices run without problem. If somebody of the responsible people read this pls. think about it.

[fableman]

Adding some pictures of the problem.

[LAN-Opfer]

I have the same sensor

ZWave.jpg (175.42 KiB) Viewed 13563 times

ZWave2.jpg (131.54 KiB) Viewed 13563 times

ZWave3.jpg (150.65 KiB) Viewed 13563 times

Uwe

[pofs]

@Mirar, check the typemask value, especially the timestamp when it was last updated: http://ip:8083/ZWaveAPI/Run/devices[2]. ... a.typemask
It probably got corrupted somehow.

@fableman, look into the log, it should contain more informative messages.

[fableman]

I am a newbiee with z-waze, but this dont look good.

sometimes i revice updates about every 24 hour only for the lux, and sometimes nothing for a few days.

I have the sensor very close to me, resetted it 1000 times and reincluded it 1000 times just feeling razbery don't work that good.

What now?

Code: Select all

[2015-03-09 17:41:20.750] [D] [zway] SETDATA devices.17.data.lastReceived = 0 (0x00000000)
[2015-03-09 17:41:20.750] [D] [zway] SETDATA devices.17.instances.0.commandClasses.132.data.lastWakeup = 1425919280 (0x54fdcd30)
[2015-03-09 17:41:20.750] [D] [zway] SETDATA devices.17.data.isAwake = True
[2015-03-09 17:41:20.750] [D] [zway] SETDATA devices.17.data.lastSend = 11361013 (0x00ad5af5)
[2015-03-09 17:41:20.750] [D] [zway] SETDATA devices.17.data.lastNonceGet = 11360013 (0x00ad570d)
[2015-03-09 17:41:20.750] [D] [zway] SETDATA devices.17.instances.0.commandClasses.132.data.lastSleep = 1425919280 (0x54fdcd30)
[2015-03-09 17:41:20.841] [D] [zway] SETDATA devices.17.data.lastPacketInfo.delivered = True
[2015-03-09 17:41:20.841] [D] [zway] SETDATA devices.17.data.lastPacketInfo.packetLength = 5 (0x00000005)
[2015-03-09 17:41:20.841] [D] [zway] SETDATA devices.17.data.lastPacketInfo.deliveryTime = 15 (0x0000000f)
[2015-03-09 17:41:20.841] [D] [zway] SETDATA devices.17.data.lastPacketInfo = **********
[2015-03-09 17:41:20.841] [D] [zway] SETDATA devices.17.data.lastSend = 11361022 (0x00ad5afe)
[2015-03-09 17:41:20.842] [D] [zway] SETDATA devices.17.data.isAwake = False
[2015-03-09 17:43:05.550] [D] [zway] SETDATA devices.17.data.lastReceived = 0 (0x00000000)
[2015-03-09 17:43:05.550] [D] [zway] SETDATA devices.17.instances.0.commandClasses.48.data.1.level = True
[2015-03-09 17:43:05.550] [D] [zway] SETDATA devices.17.instances.0.commandClasses.48.data.1 = Empty
[2015-03-09 17:43:05.559] [D] [zway] SETDATA devices.17.data.lastReceived = 0 (0x00000000)
[2015-03-09 17:43:05.559] [D] [zway] SETDATA devices.17.instances.0.commandClasses.48.data.1.level = True
[2015-03-09 17:43:05.560] [D] [zway] SETDATA devices.17.instances.0.commandClasses.48.data.1 = Empty
[2015-03-09 17:47:04.781] [D] [zway] SETDATA devices.17.data.lastReceived = 0 (0x00000000)
[2015-03-09 17:47:04.781] [D] [zway] SETDATA devices.17.instances.0.commandClasses.48.data.1.level = False
[2015-03-09 17:47:04.781] [D] [zway] SETDATA devices.17.instances.0.commandClasses.48.data.1 = Empty
[2015-03-09 17:47:04.791] [D] [zway] SETDATA devices.17.data.lastReceived = 0 (0x00000000)
[2015-03-09 17:47:04.791] [D] [zway] SETDATA devices.17.instances.0.commandClasses.48.data.1.level = False
[2015-03-09 17:47:04.792] [D] [zway] SETDATA devices.17.instances.0.commandClasses.48.data.1 = Empty
[2015-03-09 17:49:21.743] [D] [zway] SETDATA devices.17.data.lastReceived = 0 (0x00000000)
[2015-03-09 17:49:21.743] [D] [zway] SETDATA devices.17.instances.0.commandClasses.132.data.lastWakeup = 1425919761 (0x54fdcf11)
[2015-03-09 17:49:21.744] [D] [zway] SETDATA devices.17.data.isAwake = True
[2015-03-09 17:49:21.744] [D] [zway] SETDATA devices.17.data.lastSend = 11408496 (0x00ae1470)
[2015-03-09 17:49:21.744] [D] [zway] SETDATA devices.17.data.lastNonceGet = 11407496 (0x00ae1088)
[2015-03-09 17:49:21.744] [D] [zway] SETDATA devices.17.instances.0.commandClasses.132.data.lastSleep = 1425919761 (0x54fdcf11)
[2015-03-09 17:49:21.844] [D] [zway] SETDATA devices.17.data.lastPacketInfo.delivered = True
[2015-03-09 17:49:21.844] [D] [zway] SETDATA devices.17.data.lastPacketInfo.packetLength = 5 (0x00000005)
[2015-03-09 17:49:21.844] [D] [zway] SETDATA devices.17.data.lastPacketInfo.deliveryTime = 24 (0x00000018)
[2015-03-09 17:49:21.844] [D] [zway] SETDATA devices.17.data.lastPacketInfo = **********
[2015-03-09 17:49:21.845] [D] [zway] SETDATA devices.17.data.lastSend = 11408506 (0x00ae147a)
[2015-03-09 17:49:21.845] [D] [zway] SETDATA devices.17.data.isAwake = False
[2015-03-09 17:57:21.742] [D] [zway] SETDATA devices.17.data.lastReceived = 0 (0x00000000)

[Mike Yeager]

I need to reset this sensor to its default settings so I can reprogram it. I went from battery power to USB power and I no longer get updates from the sensor for LUX, Temp and Humidity...

[islipfd19]

I've found that the multisensor hangs when on mains power and needs to be recycled every so often. I wrote a script that checks for the last update time and if it exceeded the time that I had it configured to send a report for the specific sensor; the script would trigger another zwave plug to switch off and then back on. The multisensor would reconnect as if there was no issue. Obviously, the multisensor has issues, I have two and they both act the same. If the sensor is on batteries, the batteries die within a couple of weeks.