forum


https://forum.z-wave.me:443/

Aeotec Aeon Labs Multisensor

https://forum.z-wave.me:443/viewtopic.php?f=3423&t=21212

Page 1 of 1

Aeotec Aeon Labs Multisensor

Posted: 07 Feb 2015 01:50
by Mirar
All my Aeon Labs Multisensors behave. (All run 1.18.)

I noticed this phenomenon today. The z-way-server really hates sensor 3 and 5 from one of the sensors,
but not the other one:

Code: Select all

[2015-02-06 23:44:33.671] [D] [zway] RECEIVED: ( 01 09 00 04 00 02 03 80 03 64 14 )
[2015-02-06 23:44:33.672] [D] [zway] SENT ACK
[2015-02-06 23:44:33.672] [D] [zway] SETDATA devices.2.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:44:33.672] [D] [zway] SETDATA devices.2.instances.0.commandClasses.128.data.history.100 = 1423262673 (0x54d543d1)
[2015-02-06 23:44:33.672] [D] [zway] SETDATA devices.2.instances.0.commandClasses.128.data.last = 100 (0x00000064)
[2015-02-06 23:44:33.703] [D] [zway] RECEIVED: ( 01 0C 00 04 00 02 06 31 05 03 0A 01 18 D7 )
[2015-02-06 23:44:33.704] [D] [zway] SENT ACK
[2015-02-06 23:44:33.704] [D] [zway] SETDATA devices.2.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:44:33.705] [W] [zway] Node 2:0 CC SensorMultilevel: Unsupported sensor type 3 received, ignoring
[2015-02-06 23:44:33.734] [D] [zway] RECEIVED: ( 01 0C 00 04 00 02 06 31 05 05 01 21 00 E2 )
[2015-02-06 23:44:33.735] [D] [zway] SENT ACK
[2015-02-06 23:44:33.735] [D] [zway] SETDATA devices.2.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:44:33.735] [W] [zway] Node 2:0 CC SensorMultilevel: Unsupported sensor type 5 received, ignoring
[2015-02-06 23:44:33.765] [D] [zway] RECEIVED: ( 01 0C 00 04 00 02 06 31 05 01 22 00 EA 0E )
[2015-02-06 23:44:33.765] [D] [zway] SENT ACK
[2015-02-06 23:44:33.765] [D] [zway] SETDATA devices.2.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:44:33.766] [D] [zway] SETDATA devices.2.instances.0.commandClasses.49.data.1.deviceScale = 0 (0x00000000)
[2015-02-06 23:44:33.767] [D] [zway] SETDATA devices.2.instances.0.commandClasses.49.data.1.scale = 0 (0x00000000)
[2015-02-06 23:44:33.767] [D] [zway] SETDATA devices.2.instances.0.commandClasses.49.data.1.val = 23.400000
[2015-02-06 23:44:33.770] [D] [zway] SETDATA devices.2.instances.0.commandClasses.49.data.1.scaleString = "°C"
[2015-02-06 23:44:33.771] [D] [zway] SETDATA devices.2.instances.0.commandClasses.49.data.1 = Empty
The next multisensor is fine:

Code: Select all

[2015-02-06 23:46:07.384] [D] [zway] RECEIVED: ( 01 09 00 04 00 03 03 80 03 64 15 )
[2015-02-06 23:46:07.385] [D] [zway] SENT ACK
[2015-02-06 23:46:07.385] [D] [zway] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:46:07.385] [D] [zway] SETDATA devices.3.instances.0.commandClasses.128.data.history.100 = 1423262767 (0x54d5442f)
[2015-02-06 23:46:07.385] [D] [zway] SETDATA devices.3.instances.0.commandClasses.128.data.last = 100 (0x00000064)
[2015-02-06 23:46:07.414] [D] [zway] RECEIVED: ( 01 09 00 04 00 03 03 80 03 64 15 )
[2015-02-06 23:46:07.415] [D] [zway] SENT ACK
[2015-02-06 23:46:07.415] [D] [zway] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:46:07.415] [D] [zway] SETDATA devices.3.instances.0.commandClasses.128.data.history.100 = 1423262767 (0x54d5442f)
[2015-02-06 23:46:07.415] [D] [zway] SETDATA devices.3.instances.0.commandClasses.128.data.last = 100 (0x00000064)
[2015-02-06 23:46:07.445] [D] [zway] RECEIVED: ( 01 0C 00 04 00 03 06 31 05 03 0A 00 15 DA )
[2015-02-06 23:46:07.445] [D] [zway] SENT ACK
[2015-02-06 23:46:07.446] [D] [zway] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:46:07.446] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.3.deviceScale = 1 (0x00000001)
[2015-02-06 23:46:07.446] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.3.scale = 1 (0x00000001)
[2015-02-06 23:46:07.446] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.3.val = 21.000000
[2015-02-06 23:46:07.460] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.3.scaleString = "Lux"
[2015-02-06 23:46:07.460] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.3 = Empty
[2015-02-06 23:46:07.481] [D] [zway] RECEIVED: ( 01 0C 00 04 00 03 06 31 05 05 01 1C 00 DE )
[2015-02-06 23:46:07.481] [D] [zway] SENT ACK
[2015-02-06 23:46:07.481] [D] [zway] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:46:07.482] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.5.deviceScale = 0 (0x00000000)
[2015-02-06 23:46:07.482] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.5.scale = 0 (0x00000000)
[2015-02-06 23:46:07.482] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.5.val = 28.000000
[2015-02-06 23:46:07.485] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.5.scaleString = "%"
[2015-02-06 23:46:07.486] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.5 = Empty
[2015-02-06 23:46:07.512] [D] [zway] RECEIVED: ( 01 0C 00 04 00 03 06 31 05 01 22 00 DE 3B )
[2015-02-06 23:46:07.513] [D] [zway] SENT ACK
[2015-02-06 23:46:07.513] [D] [zway] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2015-02-06 23:46:07.513] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.1.deviceScale = 0 (0x00000000)
[2015-02-06 23:46:07.514] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.1.scale = 0 (0x00000000)
[2015-02-06 23:46:07.514] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.1.val = 22.200001
[2015-02-06 23:46:07.517] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.1.scaleString = "°C"
[2015-02-06 23:46:07.518] [D] [zway] SETDATA devices.3.instances.0.commandClasses.49.data.1 = Empty
Can anyone spot what the problem is with the package? I don't get it. (It stopped working about 16:00 today, with a bad luminescence packet of 580470 lux.)

Re: Aeotec Aeon Labs Multisensor

Posted: 07 Feb 2015 22:37
by Mirar
I think something made z-way-server forgot that the multisensor has those sensors. I'm not sure when it happened, just that my parts stopped getting a good reading at some point.

Re: Aeotec Aeon Labs Multisensor

Posted: 01 Mar 2015 13:22
by fableman
I have one AEOTEC multisensor

When you include it it will report from all sensors but it will only do this one time.

This unit is not working with razpberry.Z like it should.

Iam running: razberry.z-wave.me/install/v2.0.1-rc16

I tried the expert commands without any luck, and get errors when trying.

anyone please help..

Re: Aeotec Aeon Labs Multisensor

Posted: 01 Mar 2015 15:02
by thaui
I really recommend a compatibility page which devices run without problem. If somebody of the responsible people read this pls. think about it.

Re: Aeotec Aeon Labs Multisensor

Posted: 01 Mar 2015 15:04
by fableman
Adding some pictures of the problem.

Re: Aeotec Aeon Labs Multisensor

Posted: 01 Mar 2015 15:53
by LAN-Opfer
I have the same sensor
ZWave.jpg
ZWave.jpg (175.42 KiB) Viewed 15700 times
ZWave2.jpg
ZWave2.jpg (131.54 KiB) Viewed 15700 times
ZWave3.jpg
ZWave3.jpg (150.65 KiB) Viewed 15700 times
Uwe

Re: Aeotec Aeon Labs Multisensor

Posted: 01 Mar 2015 21:02
by pofs
@Mirar, check the typemask value, especially the timestamp when it was last updated: http://ip:8083/ZWaveAPI/Run/devices[2]. ... a.typemask
It probably got corrupted somehow.

@fableman, look into the log, it should contain more informative messages.

Re: Aeotec Aeon Labs Multisensor

Posted: 09 Mar 2015 21:06
by fableman
I am a newbiee with z-waze, but this dont look good.

sometimes i revice updates about every 24 hour only for the lux, and sometimes nothing for a few days.

I have the sensor very close to me, resetted it 1000 times and reincluded it 1000 times just feeling razbery don't work that good.

What now?

Code: Select all

[2015-03-09 17:41:20.750] [D] [zway] SETDATA devices.17.data.lastReceived = 0 (0x00000000)
[2015-03-09 17:41:20.750] [D] [zway] SETDATA devices.17.instances.0.commandClasses.132.data.lastWakeup = 1425919280 (0x54fdcd30)
[2015-03-09 17:41:20.750] [D] [zway] SETDATA devices.17.data.isAwake = True
[2015-03-09 17:41:20.750] [D] [zway] SETDATA devices.17.data.lastSend = 11361013 (0x00ad5af5)
[2015-03-09 17:41:20.750] [D] [zway] SETDATA devices.17.data.lastNonceGet = 11360013 (0x00ad570d)
[2015-03-09 17:41:20.750] [D] [zway] SETDATA devices.17.instances.0.commandClasses.132.data.lastSleep = 1425919280 (0x54fdcd30)
[2015-03-09 17:41:20.841] [D] [zway] SETDATA devices.17.data.lastPacketInfo.delivered = True
[2015-03-09 17:41:20.841] [D] [zway] SETDATA devices.17.data.lastPacketInfo.packetLength = 5 (0x00000005)
[2015-03-09 17:41:20.841] [D] [zway] SETDATA devices.17.data.lastPacketInfo.deliveryTime = 15 (0x0000000f)
[2015-03-09 17:41:20.841] [D] [zway] SETDATA devices.17.data.lastPacketInfo = **********
[2015-03-09 17:41:20.841] [D] [zway] SETDATA devices.17.data.lastSend = 11361022 (0x00ad5afe)
[2015-03-09 17:41:20.842] [D] [zway] SETDATA devices.17.data.isAwake = False
[2015-03-09 17:43:05.550] [D] [zway] SETDATA devices.17.data.lastReceived = 0 (0x00000000)
[2015-03-09 17:43:05.550] [D] [zway] SETDATA devices.17.instances.0.commandClasses.48.data.1.level = True
[2015-03-09 17:43:05.550] [D] [zway] SETDATA devices.17.instances.0.commandClasses.48.data.1 = Empty
[2015-03-09 17:43:05.559] [D] [zway] SETDATA devices.17.data.lastReceived = 0 (0x00000000)
[2015-03-09 17:43:05.559] [D] [zway] SETDATA devices.17.instances.0.commandClasses.48.data.1.level = True
[2015-03-09 17:43:05.560] [D] [zway] SETDATA devices.17.instances.0.commandClasses.48.data.1 = Empty
[2015-03-09 17:47:04.781] [D] [zway] SETDATA devices.17.data.lastReceived = 0 (0x00000000)
[2015-03-09 17:47:04.781] [D] [zway] SETDATA devices.17.instances.0.commandClasses.48.data.1.level = False
[2015-03-09 17:47:04.781] [D] [zway] SETDATA devices.17.instances.0.commandClasses.48.data.1 = Empty
[2015-03-09 17:47:04.791] [D] [zway] SETDATA devices.17.data.lastReceived = 0 (0x00000000)
[2015-03-09 17:47:04.791] [D] [zway] SETDATA devices.17.instances.0.commandClasses.48.data.1.level = False
[2015-03-09 17:47:04.792] [D] [zway] SETDATA devices.17.instances.0.commandClasses.48.data.1 = Empty
[2015-03-09 17:49:21.743] [D] [zway] SETDATA devices.17.data.lastReceived = 0 (0x00000000)
[2015-03-09 17:49:21.743] [D] [zway] SETDATA devices.17.instances.0.commandClasses.132.data.lastWakeup = 1425919761 (0x54fdcf11)
[2015-03-09 17:49:21.744] [D] [zway] SETDATA devices.17.data.isAwake = True
[2015-03-09 17:49:21.744] [D] [zway] SETDATA devices.17.data.lastSend = 11408496 (0x00ae1470)
[2015-03-09 17:49:21.744] [D] [zway] SETDATA devices.17.data.lastNonceGet = 11407496 (0x00ae1088)
[2015-03-09 17:49:21.744] [D] [zway] SETDATA devices.17.instances.0.commandClasses.132.data.lastSleep = 1425919761 (0x54fdcf11)
[2015-03-09 17:49:21.844] [D] [zway] SETDATA devices.17.data.lastPacketInfo.delivered = True
[2015-03-09 17:49:21.844] [D] [zway] SETDATA devices.17.data.lastPacketInfo.packetLength = 5 (0x00000005)
[2015-03-09 17:49:21.844] [D] [zway] SETDATA devices.17.data.lastPacketInfo.deliveryTime = 24 (0x00000018)
[2015-03-09 17:49:21.844] [D] [zway] SETDATA devices.17.data.lastPacketInfo = **********
[2015-03-09 17:49:21.845] [D] [zway] SETDATA devices.17.data.lastSend = 11408506 (0x00ae147a)
[2015-03-09 17:49:21.845] [D] [zway] SETDATA devices.17.data.isAwake = False
[2015-03-09 17:57:21.742] [D] [zway] SETDATA devices.17.data.lastReceived = 0 (0x00000000)

Re: Aeotec Aeon Labs Multisensor

Posted: 17 Aug 2015 23:40
by Mike Yeager
I need to reset this sensor to its default settings so I can reprogram it. I went from battery power to USB power and I no longer get updates from the sensor for LUX, Temp and Humidity...

Re: Aeotec Aeon Labs Multisensor

Posted: 06 Oct 2015 18:49
by islipfd19
I've found that the multisensor hangs when on mains power and needs to be recycled every so often. I wrote a script that checks for the last update time and if it exceeded the time that I had it configured to send a report for the specific sensor; the script would trigger another zwave plug to switch off and then back on. The multisensor would reconnect as if there was no issue. Obviously, the multisensor has issues, I have two and they both act the same. If the sensor is on batteries, the batteries die within a couple of weeks.
All times are UTC+03:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited