By default the z-way version 2.1.1 (Razberry) sets the temperature offset (parameter 66) to 64536 which means -100 degrees. When I change this to 0, it is send correctly to the device. However in the UI the value is changed to 64536 immediately again and the next time a configuration update is send, because you changed another parameter, the device is using an offset of -100 degrees again.
Am I doing something wrong here, or is this a bug?
Fibaro FGMS-001 and setting temperature offset
Re: Fibaro FGMS-001 and setting temperature offset
I got exactly the same problem, but with v.2.2.2!
Is there any human-editable files that contain these default values i can change?
It's really annoying, having to remember to always set the temp. offset to zero each time you change anything else there. (Or having to wait for the next wakeup if you forgot...)
Is there any human-editable files that contain these default values i can change?
It's really annoying, having to remember to always set the temp. offset to zero each time you change anything else there. (Or having to wait for the next wakeup if you forgot...)
Re: Fibaro FGMS-001 and setting temperature offset
You can edit ZDDX file selected for this device. You can check it in /ZWaveAPI/Run/devices[XX].data, search for ZDDXMLFile
Re: Fibaro FGMS-001 and setting temperature offset
I can't find the path you specified, but i did find a ZDDX folder in "/opt/z-way-server"...
Running a 'grep "FGMS" *' in the ZDDX folder, i get:
The xml files for my version of FGMS-001 would be either the one starting with '673' or '785'; Neither one of them have an odd default value for the temp. offset...
Am i at the wrong place?
Running a 'grep "FGMS" *' in the ZDDX folder, i get:
Code: Select all
540-010f-0800-1001-03-03-43-02-04.xml: <productCode>FIB_FGMS-001 V2.4</productCode>
601-010f-0800-4001-03-03-43-02-06.xml: <productCode>FIB_FGMS-001 V2.6</productCode>
673-010f-0801-1001-03-04-05-03-02.xml: <productName>FGMS-001</productName>
785-010f-0801-2001-03-04-05-03-02.xml: <productName>FGMS-001</productName>
ZDDX.indx:271 2049 8193 4 7 1 3 2 4 5 Fibaro FGMS-001 http://www.pepper1.net/zwavedb/uploads/resources/248d1766bc27884062b4d6ab971c9163cc2db8ec.png 785-010f-0801-2001-03-04-05-03-02.xml
ZDDX.indx:271 2049 4097 4 7 1 3 2 4 5 Fibaro FGMS-001 http://www.pepper1.net/zwavedb/uploads/resources/ace083b91b53dd1552a885fdb9ccc69946c26c8b.jpg 673-010f-0801-1001-03-04-05-03-02.xml
ZDDX.indxml: <DeviceDescription appSubVersion="2" appVersion="3" basicClass="4" brandName="Fibaro" deviceImageURL="http://www.pepper1.net/zwavedb/uploads/resources/248d1766bc27884062b4d6ab971c9163cc2db8ec.png" filePath="785-010f-0801-2001-03-04-05-03-02.xml" genericClass="7" manufacturerId="271" productId="8193" productName="FGMS-001" productType="2049" protoSubVersion="5" protoVersion="4" specificClass="1"/>
ZDDX.indxml: <DeviceDescription appSubVersion="2" appVersion="3" basicClass="4" brandName="Fibaro" deviceImageURL="http://www.pepper1.net/zwavedb/uploads/resources/ace083b91b53dd1552a885fdb9ccc69946c26c8b.jpg" filePath="673-010f-0801-1001-03-04-05-03-02.xml" genericClass="7" manufacturerId="271" productId="4097" productName="FGMS-001" productType="2049" protoSubVersion="5" protoVersion="4" specificClass="1"/>
Code: Select all
<configParam number="66" type="range" size="2" default="0000">
<name>
<lang xml:lang="en">TEMPERATURE OFFSET</lang>
</name>
<description>
<lang xml:lang="en">
The value to be added to the actual temperature, measured by the sensor (temperature compensation).
</lang>
</description>
<value from="fc18" to="03e8">
<description>
<lang xml:lang="en">
Define the value of added temperature. Available settings: -1000 - 1000 (-100°C – 100°C)
</lang>
</description>
</value>
</configParam>
Re: Fibaro FGMS-001 and setting temperature offset
Code: Select all
<value from="fc18" to="03e8">...</value>
Code: Select all
<value from="0000" to="03e8">...</value>
<value from="fc18" to="ffff">...</value>