[Solved] Aeon Labs Minimote Inclusion Issues

Discussions about existing Z-Wave device and their usage with Z-Way/Z-Cloud/Z-Box
Post Reply
viper384
Posts: 42
Joined: 18 Feb 2015 05:25

[Solved] Aeon Labs Minimote Inclusion Issues

Post by viper384 » 25 Jun 2016 07:38

DSA03202v1 - tried to add it two times. Both times it created a ghost device ( 14, now 15 ). The configuration interview page after inclusion is blank. There are no elements or references created in the expert or automation GUIs. Running version v2.2.2-test-new-webserver. Has anyone gotten these buggers to work?

Code: Select all

[2016-06-25 00:14:10.941] [I] [zway] Adding job: Add/re-include node to network
[2016-06-25 00:14:10.951] [D] [zway] SENDING (cb 0xd0): ( 01 05 00 4A C1 D0 A1 )
[2016-06-25 00:14:10.953] [D] [zway] RECEIVED ACK
[2016-06-25 00:14:10.962] [D] [zway] RECEIVED: ( 01 07 00 4A D0 01 00 00 63 )
[2016-06-25 00:14:10.962] [D] [zway] SENT ACK
[2016-06-25 00:14:10.963] [D] [zway] SETDATA controller.data.lastIncludedDevice = Empty
[2016-06-25 00:14:10.963] [D] [zway] SETDATA controller.data.lastExcludedDevice = Empty
[2016-06-25 00:14:10.963] [I] [zway] Job 0x4a (Add/re-include node to network): Ready to add - push button on the device to be added
[2016-06-25 00:14:10.963] [D] [zway] SETDATA controller.data.controllerState = 1 (0x00000001)
[2016-06-25 00:14:14.816] [D] [zway] RECEIVED: ( 01 07 00 4A D0 02 00 00 60 )
[2016-06-25 00:14:14.816] [D] [zway] SENT ACK
[2016-06-25 00:14:14.816] [I] [zway] Job 0x4a (Add/re-include node to network): Node found: #0
[2016-06-25 00:14:14.816] [D] [zway] SETDATA controller.data.controllerState = 2 (0x00000002)
[2016-06-25 00:14:17.547] [D] [zway] RECEIVED: ( 01 12 00 4A D0 04 0F 0B 01 01 01 86 72 70 9B EF 85 2B 26 0E )
[2016-06-25 00:14:17.547] [D] [zway] SENT ACK
[2016-06-25 00:14:17.547] [I] [zway] Job 0x4a (Add/re-include node to network): Adding controller: #15
[2016-06-25 00:14:17.547] [D] [zway] SETDATA controller.data.controllerState = 3 (0x00000003)
[2016-06-25 00:14:17.547] [D] [zway] SETDATA controller.data.lastIncludedDevice = 15 (0x0000000f)
[2016-06-25 00:14:17.547] [D] [zway] SETDATA devices.15.data = Empty
[2016-06-25 00:14:17.548] [D] [zway] SETDATA devices.15.instances.0.data = Empty
[2016-06-25 00:14:17.548] [D] [zway] SETDATA devices.15.instances.0.data.dynamic = Empty
[2016-06-25 00:14:17.548] [D] [zway] SETDATA devices.15.instances.0.data.dynamic = False
[2016-06-25 00:14:17.548] [D] [zway] SETDATA devices.15.instances.0.data.genericType = Empty
[2016-06-25 00:14:17.548] [D] [zway] SETDATA devices.15.instances.0.data.genericType = 0 (0x00000000)
[2016-06-25 00:14:17.548] [D] [zway] SETDATA devices.15.instances.0.data.specificType = Empty
[2016-06-25 00:14:17.548] [D] [zway] SETDATA devices.15.instances.0.data.specificType = 0 (0x00000000)
[2016-06-25 00:14:17.548] [D] [zway] SETDATA devices.15.instances.0.data.nodeInfoFrame = Empty
[2016-06-25 00:14:17.549] [D] [zway] SETDATA devices.15.data.basicType = Empty
[2016-06-25 00:14:17.549] [D] [zway] SETDATA devices.15.data.genericType = Empty
[2016-06-25 00:14:17.549] [D] [zway] SETDATA devices.15.data.specificType = Empty
[2016-06-25 00:14:17.549] [D] [zway] SETDATA devices.15.data.infoProtocolSpecific = Empty
[2016-06-25 00:14:17.549] [D] [zway] SETDATA devices.15.data.deviceTypeString = Empty
[2016-06-25 00:14:17.549] [D] [zway] SETDATA devices.15.data.isVirtual = Empty
[2016-06-25 00:14:17.549] [D] [zway] SETDATA devices.15.data.isListening = Empty
[2016-06-25 00:14:17.549] [D] [zway] SETDATA devices.15.data.isRouting = Empty
[2016-06-25 00:14:17.550] [D] [zway] SETDATA devices.15.data.isAwake = Empty
[2016-06-25 00:14:17.550] [D] [zway] SETDATA devices.15.data.optional = Empty
[2016-06-25 00:14:17.550] [D] [zway] SETDATA devices.15.data.isFailed = Empty
[2016-06-25 00:14:17.550] [D] [zway] SETDATA devices.15.data.beam = Empty
[2016-06-25 00:14:17.550] [D] [zway] SETDATA devices.15.data.sensor250 = Empty
[2016-06-25 00:14:17.550] [D] [zway] SETDATA devices.15.data.sensor1000 = Empty
[2016-06-25 00:14:17.550] [D] [zway] SETDATA devices.15.data.neighbours = Empty
[2016-06-25 00:14:17.551] [D] [zway] SETDATA devices.15.data.manufacturerId = Empty
[2016-06-25 00:14:17.551] [D] [zway] SETDATA devices.15.data.vendorString = Empty
[2016-06-25 00:14:17.551] [D] [zway] SETDATA devices.15.data.manufacturerProductType = Empty
[2016-06-25 00:14:17.551] [D] [zway] SETDATA devices.15.data.manufacturerProductId = Empty
[2016-06-25 00:14:17.551] [D] [zway] SETDATA devices.15.data.ZWLib = Empty
[2016-06-25 00:14:17.551] [D] [zway] SETDATA devices.15.data.ZWProtocolMajor = Empty
[2016-06-25 00:14:17.552] [D] [zway] SETDATA devices.15.data.ZWProtocolMinor = Empty
[2016-06-25 00:14:17.552] [D] [zway] SETDATA devices.15.data.SDK = Empty
[2016-06-25 00:14:17.552] [D] [zway] SETDATA devices.15.data.applicationMajor = Empty
[2016-06-25 00:14:17.552] [D] [zway] SETDATA devices.15.data.applicationMinor = Empty
[2016-06-25 00:14:17.552] [D] [zway] SETDATA devices.15.data.nodeInfoFrame = Empty
[2016-06-25 00:14:17.552] [D] [zway] SETDATA devices.15.data.ZDDXMLFile = Empty
[2016-06-25 00:14:17.552] [D] [zway] SETDATA devices.15.data.lastSend = Empty
[2016-06-25 00:14:17.552] [D] [zway] SETDATA devices.15.data.lastNonceGet = Empty
[2016-06-25 00:14:17.553] [D] [zway] SETDATA devices.15.data.lastReceived = Empty
[2016-06-25 00:14:17.553] [D] [zway] SETDATA devices.15.data.failureCount = Empty
[2016-06-25 00:14:17.553] [D] [zway] SETDATA devices.15.data.keepAwake = Empty
[2016-06-25 00:14:17.553] [D] [zway] SETDATA devices.15.data.countSuccess = Empty
[2016-06-25 00:14:17.553] [D] [zway] SETDATA devices.15.data.countFailed = Empty
[2016-06-25 00:14:17.553] [D] [zway] SETDATA devices.15.data.queueLength = Empty
[2016-06-25 00:14:17.553] [D] [zway] SETDATA devices.15.data.givenName = Empty
[2016-06-25 00:14:17.553] [D] [zway] SETDATA devices.15.data.lastPacketInfo = Empty
[2016-06-25 00:14:17.554] [D] [zway] SETDATA devices.15.data.lastPacketInfo.deliveryTime = Empty
[2016-06-25 00:14:17.554] [D] [zway] SETDATA devices.15.data.lastPacketInfo.delivered = Empty
[2016-06-25 00:14:17.554] [D] [zway] SETDATA devices.15.data.lastPacketInfo.packetLength = Empty
[2016-06-25 00:14:17.554] [D] [zway] SETDATA devices.15.data.basicType = 0 (0x00000000)
[2016-06-25 00:14:17.554] [D] [zway] SETDATA devices.15.data.genericType = 0 (0x00000000)
[2016-06-25 00:14:17.554] [D] [zway] SETDATA devices.15.data.specificType = 0 (0x00000000)
[2016-06-25 00:14:17.554] [D] [zway] SETDATA devices.15.data.infoProtocolSpecific = 0 (0x00000000)
[2016-06-25 00:14:17.554] [D] [zway] SETDATA devices.15.data.deviceTypeString = ""
[2016-06-25 00:14:17.555] [D] [zway] SETDATA devices.15.data.isVirtual = False
[2016-06-25 00:14:17.555] [D] [zway] SETDATA devices.15.data.isListening = True
[2016-06-25 00:14:17.555] [D] [zway] SETDATA devices.15.data.isRouting = False
[2016-06-25 00:14:17.555] [D] [zway] SETDATA devices.15.data.isAwake = False
[2016-06-25 00:14:17.555] [D] [zway] SETDATA devices.15.data.optional = False
[2016-06-25 00:14:17.555] [D] [zway] SETDATA devices.15.data.isFailed = False
[2016-06-25 00:14:17.555] [D] [zway] SETDATA devices.15.data.beam = False
[2016-06-25 00:14:17.555] [D] [zway] SETDATA devices.15.data.sensor250 = False
[2016-06-25 00:14:17.555] [D] [zway] SETDATA devices.15.data.sensor1000 = False
[2016-06-25 00:14:17.555] [D] [zway] SETDATA devices.15.data.neighbours = Empty
[2016-06-25 00:14:17.555] [D] [zway] SETDATA devices.15.data.manufacturerId = 0 (0x00000000)
[2016-06-25 00:14:17.556] [D] [zway] SETDATA devices.15.data.manufacturerProductType = 0 (0x00000000)
[2016-06-25 00:14:17.556] [D] [zway] SETDATA devices.15.data.manufacturerProductId = 0 (0x00000000)
[2016-06-25 00:14:17.556] [D] [zway] SETDATA devices.15.data.applicationMajor = 0 (0x00000000)
[2016-06-25 00:14:17.556] [D] [zway] SETDATA devices.15.data.applicationMinor = 0 (0x00000000)
[2016-06-25 00:14:17.556] [D] [zway] SETDATA devices.15.data.ZWProtocolMajor = 0 (0x00000000)
[2016-06-25 00:14:17.556] [D] [zway] SETDATA devices.15.data.ZWProtocolMinor = 0 (0x00000000)
[2016-06-25 00:14:17.556] [D] [zway] SETDATA devices.15.data.ZWLib = 0 (0x00000000)
[2016-06-25 00:14:17.556] [D] [zway] SETDATA devices.15.data.SDK = ""
[2016-06-25 00:14:17.556] [D] [zway] SETDATA devices.15.data.vendorString = ""
[2016-06-25 00:14:17.556] [D] [zway] SETDATA devices.15.data.nodeInfoFrame = Empty
[2016-06-25 00:14:17.556] [D] [zway] SETDATA devices.15.data.ZDDXMLFile = ""
[2016-06-25 00:14:17.557] [D] [zway] SETDATA devices.15.data.keepAwake = False
[2016-06-25 00:14:17.557] [D] [zway] SETDATA devices.15.data.countSuccess = 0 (0x00000000)
[2016-06-25 00:14:17.557] [D] [zway] SETDATA devices.15.data.countFailed = 0 (0x00000000)
[2016-06-25 00:14:17.557] [D] [zway] SETDATA devices.15.data.queueLength = 0 (0x00000000)
[2016-06-25 00:14:17.557] [D] [zway] SETDATA devices.15.data.lastReceived = 0 (0x00000000)
[2016-06-25 00:14:17.557] [D] [zway] SETDATA devices.15.data.lastSend = 0 (0x00000000)
[2016-06-25 00:14:17.557] [D] [zway] SETDATA devices.15.data.failureCount = 0 (0x00000000)
[2016-06-25 00:14:17.557] [D] [zway] SETDATA devices.15.data.givenName = ""
[2016-06-25 00:14:17.557] [I] [zway] Adding job: Get node protocol information
[2016-06-25 00:14:17.557] [I] [zway] Adding job: Get routing table line
[2016-06-25 00:14:17.557] [I] [zway] Adding job: Check if node is failed
[2016-06-25 00:14:17.558] [I] [zway] Adding job: Get routing table line
[2016-06-25 00:14:17.558] [I] [zway] Adding job: Get routing table line
[2016-06-25 00:14:17.558] [I] [zway] Adding job: Get routing table line
[2016-06-25 00:14:17.558] [I] [zway] Adding job: Get routing table line
[2016-06-25 00:14:17.558] [I] [zway] Adding job: Get routing table line
[2016-06-25 00:14:17.558] [I] [zway] Adding job: Get routing table line
[2016-06-25 00:14:17.558] [I] [zway] Adding job: Get routing table line
[2016-06-25 00:14:17.558] [I] [zway] Adding job: Get routing table line
[2016-06-25 00:14:17.559] [I] [zway] Adding job: Get routing table line
[2016-06-25 00:14:17.559] [I] [zway] Adding job: Get routing table line
[2016-06-25 00:14:17.559] [D] [zway] Job 0x80 (Get routing table line): removing duplicate
[2016-06-25 00:14:17.559] [D] [zway] SETDATA devices.15.data.basicType = 1 (0x00000001)
[2016-06-25 00:14:17.559] [D] [zway] SETDATA devices.15.data.genericType = 1 (0x00000001)
[2016-06-25 00:14:17.559] [D] [zway] SETDATA devices.15.instances.0.data.genericType = 1 (0x00000001)
[2016-06-25 00:14:17.559] [D] [zway] SETDATA devices.15.data.specificType = 1 (0x00000001)
[2016-06-25 00:14:17.560] [D] [zway] SETDATA devices.15.instances.0.data.specificType = 1 (0x00000001)
[2016-06-25 00:14:17.562] [D] [zway] SETDATA devices.15.data.deviceTypeString = "Portable Remote Controller"
[2016-06-25 00:14:17.563] [D] [zway] SETDATA devices.15.data.nodeInfoFrame = byte[8]
[2016-06-25 00:14:17.563] [D] [zway]   ( 86 72 70 9B EF 85 2B 26 )
[2016-06-25 00:14:17.563] [I] [zway] Adding job: Set new SUC/SIS
[2016-06-25 00:14:17.563] [D] [zway] SENDING: ( 01 04 00 62 0F 96 )
[2016-06-25 00:14:17.566] [D] [zway] RECEIVED ACK
[2016-06-25 00:14:17.567] [D] [zway] RECEIVED: ( 01 04 01 62 01 99 )
[2016-06-25 00:14:17.567] [D] [zway] SENT ACK
[2016-06-25 00:14:17.567] [D] [zway] SETDATA devices.15.data.isFailed = True
[2016-06-25 00:14:17.567] [I] [zway] Job 0x62 (Check if node is failed): Node 15 is failed
[2016-06-25 00:14:17.567] [D] [zway] Job 0x62 (Check if node is failed): success
[2016-06-25 00:14:17.568] [I] [zway] Removing job: Check if node is failed
[2016-06-25 00:14:18.073] [D] [zway] SETDATA devices.15.data.givenName = "Portable%20Remote%20Controller_15"
[2016-06-25 00:14:21.044] [D] [zway] SETDATA devices.15.data.givenName = "Portable%20Remote%20Controller_15"
[2016-06-25 00:14:30.669] [D] [zway] RECEIVED: ( 01 07 00 4A D0 07 0F 00 6A )
[2016-06-25 00:14:30.670] [D] [zway] SENT ACK
[2016-06-25 00:14:30.670] [I] [zway] Job 0x4a (Add/re-include node to network): Failed
[2016-06-25 00:14:30.670] [D] [zway] Job 0x4a (Add/re-include node to network): fail
[2016-06-25 00:14:30.670] [I] [zway] Removing job: Add/re-include node to network
[2016-06-25 00:14:30.670] [D] [zway] SETDATA controller.data.controllerState = 0 (0x00000000)
[2016-06-25 00:14:30.670] [I] [zway] Adding job: Add/re-include node to network
[2016-06-25 00:14:30.670] [D] [zway] SENDING (cb 0x00): ( 01 05 00 4A 05 00 B5 )
[2016-06-25 00:14:30.680] [D] [zway] RECEIVED ACK
[2016-06-25 00:14:30.680] [I] [zway] Job 0x4a (Add/re-include node to network): Stop done
[2016-06-25 00:14:30.680] [D] [zway] Job 0x4a (Add/re-include node to network): success
[2016-06-25 00:14:30.681] [I] [zway] Removing job: Add/re-include node to network
[2016-06-25 00:14:30.681] [D] [zway] SETDATA controller.data.controllerState = 0 (0x00000000)
[2016-06-25 00:14:30.692] [D] [zway] SENDING: ( 01 04 00 41 0F B5 )
[2016-06-25 00:14:30.694] [D] [zway] RECEIVED ACK
[2016-06-25 00:14:30.695] [D] [zway] RECEIVED: ( 01 09 01 41 00 00 00 03 00 00 B5 )
[2016-06-25 00:14:30.695] [D] [zway] SENT ACK
[2016-06-25 00:14:30.697] [I] [zway] Job 0x41 (Get node protocol information): Device 15 does not exist
[2016-06-25 00:14:30.697] [D] [zway] Job 0x41 (Get node protocol information): fail
[2016-06-25 00:14:30.697] [I] [zway] Removing job: Get node protocol information
[2016-06-25 00:14:30.698] [D] [zway] SENDING: ( 01 06 00 80 01 00 00 78 )
[2016-06-25 00:14:30.702] [D] [zway] RECEIVED ACK
[2016-06-25 00:14:30.712] [D] [zway] RECEIVED: ( 01 20 01 80 A0 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EE )
[2016-06-25 00:14:30.713] [D] [zway] SENT ACK
[2016-06-25 00:14:30.717] [D] [zway] SETDATA devices.1.data.neighbours = byte[3]
[2016-06-25 00:14:30.717] [D] [zway]   ( 06 08 0D )
[2016-06-25 00:14:30.717] [I] [zway] Job 0x80 (Get routing table line): List of neighbours for node 1: [ 06 08 0d ]
[2016-06-25 00:14:30.717] [D] [zway] Job 0x80 (Get routing table line): success
[2016-06-25 00:14:30.717] [I] [zway] Removing job: Get routing table line
[2016-06-25 00:14:30.718] [D] [zway] SENDING: ( 01 06 00 80 02 00 00 7B )
[2016-06-25 00:14:30.733] [D] [zway] RECEIVED ACK
[2016-06-25 00:14:30.735] [D] [zway] RECEIVED: ( 01 20 01 80 F0 1C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 B2 )
[2016-06-25 00:14:30.737] [D] [zway] SENT ACK
[2016-06-25 00:14:30.739] [D] [zway] SETDATA devices.2.data.neighbours = byte[7]
[2016-06-25 00:14:30.743] [D] [zway]   ( 05 06 07 08 0B 0C 0D )
[2016-06-25 00:14:30.745] [I] [zway] Job 0x80 (Get routing table line): List of neighbours for node 2: [ 05 06 07 08 0b 0c 0d ]
[2016-06-25 00:14:30.746] [D] [zway] Job 0x80 (Get routing table line): success
[2016-06-25 00:14:30.746] [I] [zway] Removing job: Get routing table line
[2016-06-25 00:14:30.749] [D] [zway] SENDING: ( 01 06 00 80 05 00 00 7C )
[2016-06-25 00:14:30.752] [D] [zway] RECEIVED ACK
[2016-06-25 00:14:30.760] [D] [zway] RECEIVED: ( 01 20 01 80 AA 1C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 E8 )
[2016-06-25 00:14:30.760] [D] [zway] SENT ACK
[2016-06-25 00:14:30.760] [D] [zway] SETDATA devices.5.data.neighbours = byte[7]
[2016-06-25 00:14:30.760] [D] [zway]   ( 02 04 06 08 0B 0C 0D )
[2016-06-25 00:14:30.760] [I] [zway] Job 0x80 (Get routing table line): List of neighbours for node 5: [ 02 04 06 08 0b 0c 0d ]
[2016-06-25 00:14:30.760] [D] [zway] Job 0x80 (Get routing table line): success
[2016-06-25 00:14:30.760] [I] [zway] Removing job: Get routing table line
[2016-06-25 00:14:30.760] [D] [zway] SENDING: ( 01 06 00 80 06 00 00 7F )
[2016-06-25 00:14:30.770] [D] [zway] RECEIVED ACK
[2016-06-25 00:14:30.770] [D] [zway] RECEIVED: ( 01 20 01 80 D3 1C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 91 )
[2016-06-25 00:14:30.770] [D] [zway] SENT ACK
[2016-06-25 00:14:30.770] [D] [zway] SETDATA devices.6.data.neighbours = byte[8]
[2016-06-25 00:14:30.771] [D] [zway]   ( 01 02 05 07 08 0B 0C 0D )
[2016-06-25 00:14:30.771] [I] [zway] Job 0x80 (Get routing table line): List of neighbours for node 6: [ 01 02 05 07 08 0b 0c 0d ]
[2016-06-25 00:14:30.771] [D] [zway] Job 0x80 (Get routing table line): success
[2016-06-25 00:14:30.771] [I] [zway] Removing job: Get routing table line
[2016-06-25 00:14:30.771] [D] [zway] SENDING: ( 01 06 00 80 07 00 00 7E )
[2016-06-25 00:14:30.781] [D] [zway] RECEIVED ACK
[2016-06-25 00:14:30.781] [D] [zway] RECEIVED: ( 01 20 01 80 AA 1C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 E8 )
[2016-06-25 00:14:30.781] [D] [zway] SENT ACK
[2016-06-25 00:14:30.781] [D] [zway] SETDATA devices.7.data.neighbours = byte[7]
[2016-06-25 00:14:30.781] [D] [zway]   ( 02 04 06 08 0B 0C 0D )
[2016-06-25 00:14:30.781] [I] [zway] Job 0x80 (Get routing table line): List of neighbours for node 7: [ 02 04 06 08 0b 0c 0d ]
[2016-06-25 00:14:30.782] [D] [zway] Job 0x80 (Get routing table line): success
[2016-06-25 00:14:30.782] [I] [zway] Removing job: Get routing table line
[2016-06-25 00:14:30.782] [D] [zway] SENDING: ( 01 06 00 80 08 00 00 71 )
[2016-06-25 00:14:30.791] [D] [zway] RECEIVED ACK
[2016-06-25 00:14:30.792] [D] [zway] RECEIVED: ( 01 20 01 80 73 14 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 39 )
[2016-06-25 00:14:30.792] [D] [zway] SENT ACK
[2016-06-25 00:14:30.792] [D] [zway] SETDATA devices.8.data.neighbours = byte[7]
[2016-06-25 00:14:30.792] [D] [zway]   ( 01 02 05 06 07 0B 0D )
[2016-06-25 00:14:30.792] [I] [zway] Job 0x80 (Get routing table line): List of neighbours for node 8: [ 01 02 05 06 07 0b 0d ]
[2016-06-25 00:14:30.792] [D] [zway] Job 0x80 (Get routing table line): success
[2016-06-25 00:14:30.792] [I] [zway] Removing job: Get routing table line
[2016-06-25 00:14:30.793] [D] [zway] SENDING: ( 01 06 00 80 0B 00 00 72 )
[2016-06-25 00:14:30.801] [D] [zway] RECEIVED ACK
[2016-06-25 00:14:30.802] [D] [zway] RECEIVED: ( 01 20 01 80 F2 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 A4 )
[2016-06-25 00:14:30.802] [D] [zway] SENT ACK
[2016-06-25 00:14:30.802] [D] [zway] SETDATA devices.11.data.neighbours = byte[6]
[2016-06-25 00:14:30.802] [D] [zway]   ( 02 05 06 07 08 0C )
[2016-06-25 00:14:30.802] [I] [zway] Job 0x80 (Get routing table line): List of neighbours for node 11: [ 02 05 06 07 08 0c ]
[2016-06-25 00:14:30.802] [D] [zway] Job 0x80 (Get routing table line): success
[2016-06-25 00:14:30.802] [I] [zway] Removing job: Get routing table line
[2016-06-25 00:14:30.803] [D] [zway] SENDING: ( 01 06 00 80 0C 00 00 75 )
[2016-06-25 00:14:30.811] [D] [zway] RECEIVED ACK
[2016-06-25 00:14:30.811] [D] [zway] RECEIVED: ( 01 20 01 80 72 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 28 )
[2016-06-25 00:14:30.812] [D] [zway] SENT ACK
[2016-06-25 00:14:30.812] [D] [zway] SETDATA devices.12.data.neighbours = byte[5]
[2016-06-25 00:14:30.812] [D] [zway]   ( 02 05 06 07 0B )
[2016-06-25 00:14:30.812] [I] [zway] Job 0x80 (Get routing table line): List of neighbours for node 12: [ 02 05 06 07 0b ]
[2016-06-25 00:14:30.812] [D] [zway] Job 0x80 (Get routing table line): success
[2016-06-25 00:14:30.812] [I] [zway] Removing job: Get routing table line
[2016-06-25 00:14:30.812] [D] [zway] SENDING: ( 01 06 00 80 0D 00 00 74 )
[2016-06-25 00:14:30.821] [D] [zway] RECEIVED ACK
[2016-06-25 00:14:30.821] [D] [zway] RECEIVED: ( 01 20 01 80 F3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 AD )
[2016-06-25 00:14:30.821] [D] [zway] SENT ACK
[2016-06-25 00:14:30.821] [D] [zway] SETDATA devices.13.data.neighbours = byte[6]
[2016-06-25 00:14:30.822] [D] [zway]   ( 01 02 05 06 07 08 )
[2016-06-25 00:14:30.822] [I] [zway] Job 0x80 (Get routing table line): List of neighbours for node 13: [ 01 02 05 06 07 08 ]
[2016-06-25 00:14:30.822] [D] [zway] Job 0x80 (Get routing table line): success
[2016-06-25 00:14:30.822] [I] [zway] Removing job: Get routing table line
[2016-06-25 00:14:30.822] [D] [zway] SENDING: ( 01 06 00 80 0E 00 00 77 )
[2016-06-25 00:14:30.831] [D] [zway] RECEIVED ACK
[2016-06-25 00:14:30.832] [D] [zway] RECEIVED: ( 01 20 01 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5E )
[2016-06-25 00:14:30.832] [D] [zway] SENT ACK
[2016-06-25 00:14:30.832] [D] [zway] SETDATA devices.14.data.neighbours = byte[0]
[2016-06-25 00:14:30.832] [D] [zway]   ( zero-length buffer )
[2016-06-25 00:14:30.832] [I] [zway] Job 0x80 (Get routing table line): List of neighbours for node 14: [ ]
[2016-06-25 00:14:30.832] [D] [zway] Job 0x80 (Get routing table line): success
[2016-06-25 00:14:30.832] [I] [zway] Removing job: Get routing table line
[2016-06-25 00:14:30.833] [D] [zway] SENDING: ( 01 06 00 80 0F 00 00 76 )
[2016-06-25 00:14:30.841] [D] [zway] RECEIVED ACK
[2016-06-25 00:14:30.841] [D] [zway] RECEIVED: ( 01 20 01 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5E )
[2016-06-25 00:14:30.841] [D] [zway] SENT ACK
[2016-06-25 00:14:30.841] [D] [zway] SETDATA devices.15.data.neighbours = byte[0]
[2016-06-25 00:14:30.842] [D] [zway]   ( zero-length buffer )
[2016-06-25 00:14:30.842] [I] [zway] Job 0x80 (Get routing table line): List of neighbours for node 15: [ ]
[2016-06-25 00:14:30.842] [D] [zway] Job 0x80 (Get routing table line): success
[2016-06-25 00:14:30.842] [I] [zway] Removing job: Get routing table line
[2016-06-25 00:14:30.842] [D] [zway] SENDING (cb 0xd1): ( 01 08 00 54 0F 01 00 00 D1 7C )
[2016-06-25 00:14:30.851] [D] [zway] RECEIVED ACK
[2016-06-25 00:14:30.852] [D] [zway] RECEIVED: ( 01 04 01 54 00 AE )
[2016-06-25 00:14:30.852] [D] [zway] SENT ACK
[2016-06-25 00:14:30.852] [I] [zway] Job 0x54 (Set new SUC/SIS): Failed
[2016-06-25 00:14:30.852] [D] [zway] Job 0x54 (Set new SUC/SIS): fail
[2016-06-25 00:14:30.852] [I] [zway] Removing job: Set new SUC/SIS
Last edited by viper384 on 26 Jun 2016 02:38, edited 1 time in total.

viper384
Posts: 42
Joined: 18 Feb 2015 05:25

Re: Aeon Labs Minimote Inclusion Issues

Post by viper384 » 25 Jun 2016 09:02

Ok, I got the interview to finish. I believe I was not holding the button correctly causing the interview to fail before it was completed. Very basic, 4 command classes. When I attempt to pick the device description "Aeon Labs Minimote US", I get a error Error handling data /ZWave.zway/Run/devices[17].LoadXMLFile("223-0086-0001-0003-00-02-30-00-00.xml").

I still can't seem to do anything with this remote, like use it in a scene. Help!!!

viper384
Posts: 42
Joined: 18 Feb 2015 05:25

Re: Aeon Labs Minimote Inclusion Issues

Post by viper384 » 26 Jun 2016 02:38

I got it working following the instructions on another thread I found after my post. In short, as Duvel stated, setting parameter 250 to 1 got the key presses to register in the z-way-server.log....

xx=device number
yourIP:8083/ZWaveAPI/Run/devices[xx].instances[0].commandClasses[0x70].Set(250,1,1)
After activating the App "Trap events from Remotes and Sensors" and clicking long and short on all the buttons, they all showed up as devices.

Then with the App "If -> Then" I was able to toggle a switch or start a scene with the buttons.

Duvel


* I also attempted to program via 0x96 command class, the remote accepted the command(s) but didn't engage. May have been because I didn't associate the remote to device thinking back??
* To wake up V1 minimote: Hold the join button for 3 seconds (blue LED solid) until the red flashes quickly and both LEDs shut off. It's quirky and the button sequence only works half of the time for me, the other half of the time the remote goes into inclusion mode (slow flashing blue). Printed instructions didn't state wake up instructions, online instructions call the button "learn" (v2 remote).
* To avoid possible inclusion failure, set the device in inclusion first, then the Zway.
* V1 and V2 minimote use the same firmware. For reference I am using 1.19
* My V1 has four command classes, basic, config, version, manufacturerspecific, maybe V2 has more??
* Model: DSA03202W-ZWUS

V1 versus V2 Button Labels for Reference:

Code: Select all

V2: Square Square Square Square | Include    Remove     Associate    Learn
V1: 1       2      3       4    | +          -           Blank       Join

ridewithstyle
Posts: 72
Joined: 02 Jan 2016 01:20

Re: [Solved] Aeon Labs Minimote Inclusion Issues

Post by ridewithstyle » 27 Jul 2016 22:22

Hi there,

thanks, man. Thanks to your post, I tried again and through sheer persistance I succeeded.

Much obliged. :-)

Regards, rws

Post Reply