forum

PoltoS wrote: ↑

21 Dec 2022 03:36

All that is possible. How can the community help you?

// Global variables

byte buttonState1;

byte buttonState2;

byte buttonState3;

byte buttonState4;

byte switchValue1 = 0;

byte switchValue2 = 0;

byte switchValue3 = 0;

byte switchValue4 = 0;

// Z-Wave channels
ZUNO_SETUP_CHANNELS(
  ZUNO_SENSOR_BINARY(ZUNO_SENSOR_BINARY_TYPE_GENERAL_PURPOSE, getterButton1),
  ZUNO_SENSOR_BINARY(ZUNO_SENSOR_BINARY_TYPE_GENERAL_PURPOSE, getterButton2),
  ZUNO_SENSOR_BINARY(ZUNO_SENSOR_BINARY_TYPE_GENERAL_PURPOSE, getterButton3),
  ZUNO_SENSOR_BINARY(ZUNO_SENSOR_BINARY_TYPE_GENERAL_PURPOSE, getterButton4),
  ZUNO_SWITCH_BINARY(getterSwitch1, setterSwitch1),
  ZUNO_SWITCH_BINARY(getterSwitch2, setterSwitch2),
  ZUNO_SWITCH_BINARY(getterSwitch3, setterSwitch3),
  ZUNO_SWITCH_BINARY(getterSwitch4, setterSwitch4)
);

void setup() {
  pinMode(19, INPUT);
  buttonState1 = !digitalRead(3);

  pinMode(20, INPUT);
  buttonState2 = !digitalRead(4);

  pinMode(21, INPUT);
  buttonState3 = !digitalRead(5);

  pinMode(22, INPUT);
  buttonState4 = !digitalRead(6);

  pinMode(9, OUTPUT);

  pinMode(10, OUTPUT);

  pinMode(11, OUTPUT);

  pinMode(12, OUTPUT);
}

void loop() {
  // put your main code here, to run repeatedly:
  byte _buttonState1 = digitalRead(19);
  if (buttonState1 != _buttonState1) {
    buttonState1 = _buttonState1;
    zunoSendReport(1);
  }

  byte _buttonState2 = digitalRead(20);
  if (buttonState2 != _buttonState2) {
    buttonState2 = _buttonState2;
    zunoSendReport(2);
  }

  byte _buttonState3 = digitalRead(21);
  if (buttonState3 != _buttonState3) {
    buttonState3 = _buttonState3;
    zunoSendReport(3);
  }

  byte _buttonState4 = digitalRead(22);
  if (buttonState4 != _buttonState4) {
    buttonState4 = _buttonState4;
    zunoSendReport(4);
  }

  digitalWrite(9, switchValue1 ? HIGH : LOW);

  digitalWrite(10, switchValue2 ? HIGH : LOW);

  digitalWrite(11, switchValue3 ? HIGH : LOW);

  digitalWrite(12, switchValue4 ? HIGH : LOW);

  delay(20);

}


// Getters and setters

byte getterButton1() {
  return buttonState1;
}

byte getterButton2() {
  return buttonState2;
}

byte getterButton3() {
  return buttonState3;
}

byte getterButton4() {
  return buttonState4;
}

void setterSwitch1(byte value) {
  switchValue1 = value;
}

byte getterSwitch1() {
  return switchValue1;
}

void setterSwitch2(byte value) {
  switchValue2 = value;
}

byte getterSwitch2() {
  return switchValue2;
}

void setterSwitch3(byte value) {
  switchValue3 = value;
}

byte getterSwitch3() {
  return switchValue3;
}

void setterSwitch4(byte value) {
  switchValue4 = value;
}

byte getterSwitch4() {
  return switchValue4;
}

************* Building Arduino Sketch *************
C:\Users\doini\AppData\Local\Temp\arduino-sketch-203E8FD2854AA30CD0673EE4D64A6EF6/4 way relay with switch input zuno.ino
***************************************************

--- USING a list of libraries from:
C:\Users\doini\AppData\Local\Arduino15\packages\Z-Uno\hardware\zw8051\2.1.8\libraries
c:\Users\doini\OneDrive\Documents\Arduino\libraries
*** Collecting prototypes...
Preprocessing file: C:\Users\doini\AppData\Local\Temp\arduino-sketch-203E8FD2854AA30CD0673EE4D64A6EF6\Custom.c with SDCPP...

Preprocessing file: C:\Users\doini\AppData\Local\Temp\arduino-sketch-203E8FD2854AA30CD0673EE4D64A6EF6\Print.cpp with SDCPP...
Compiling C:\Users\doini\AppData\Local\Temp\arduino-sketch-203E8FD2854AA30CD0673EE4D64A6EF6\Print_sdcpp_.cpp ...
Print_sdcpp_.cpp:543:17& has lower precedence than ==; == will be evaluated first
Preprocessing file: C:\Users\doini\AppData\Local\Temp\arduino-sketch-203E8FD2854AA30CD0673EE4D64A6EF6\Stream.cpp with SDCPP...
Compiling C:\Users\doini\AppData\Local\Temp\arduino-sketch-203E8FD2854AA30CD0673EE4D64A6EF6\Stream_sdcpp_.cpp ...
Preprocessing file: C:\Users\doini\AppData\Local\Temp\arduino-sketch-203E8FD2854AA30CD0673EE4D64A6EF6\HardwareSerial.cpp with SDCPP...
Compiling C:\Users\doini\AppData\Local\Temp\arduino-sketch-203E8FD2854AA30CD0673EE4D64A6EF6\HardwareSerial_sdcpp_.cpp ...
Preprocessing file: C:\Users\doini\AppData\Local\Temp\arduino-sketch-203E8FD2854AA30CD0673EE4D64A6EF6\HLCore.cpp with SDCPP...
Compiling C:\Users\doini\AppData\Local\Temp\arduino-sketch-203E8FD2854AA30CD0673EE4D64A6EF6\HLCore_sdcpp_.cpp ...
Preprocessing file: C:\Users\doini\AppData\Local\Temp\arduino-sketch-203E8FD2854AA30CD0673EE4D64A6EF6\EEPROM.cpp with SDCPP...
Compiling C:\Users\doini\AppData\Local\Temp\arduino-sketch-203E8FD2854AA30CD0673EE4D64A6EF6\EEPROM_sdcpp_.cpp ...
Preprocessing file: C:\Users\doini\AppData\Local\Temp\arduino-sketch-203E8FD2854AA30CD0673EE4D64A6EF6\4 way relay with switch input zuno.cpp with SDCPP...
Compiling C:\Users\doini\AppData\Local\Temp\arduino-sketch-203E8FD2854AA30CD0673EE4D64A6EF6\4 way relay with switch input zuno_sdcpp_.cpp ...
Preprocessing file: C:\Users\doini\AppData\Local\Temp\arduino-sketch-203E8FD2854AA30CD0673EE4D64A6EF6\ZWSupport.cpp with SDCPP...
Compiling C:\Users\doini\AppData\Local\Temp\arduino-sketch-203E8FD2854AA30CD0673EE4D64A6EF6\ZWSupport_sdcpp_.cpp ...
ZWSupport_sdcpp_.cpp6:error:variable has incomplete type 'void'
ZWSupport_sdcpp_.cpp22:error:expected ';' after top level declarator

uCxx returned error code:1


exit status 1

Compilation error: exit status 1