Old ZMEEUZB1 firmware update

[FlangeMonkey]

Hi Guys,

I'm looking to do a firmware update on my ZMEEUZB1, which was purchased back in 2017. Its the manual process and I cannot determine the current version. I'm executing ./ZMESerialUpdater serialapi_uzbupdate -d /dev/ttyACM0 and get the following output:

Code: Select all

/ZMESerialUpdater/x64# ./ZMESerialUpdater serialapi_uzbupdate -d /dev/ttyACM0


                                        Z-WAVE Serial API Tool
                                             Version:LWE0.9
                                             by Z-WAVE>ME


-->
-->
-->
-->
-->
-->
-->
-->
Device ready in:8.63519310951 seconds
          FULL INFO
Openning port                            ..............................                            OK

        Error  0 returned ff for ACK


        Error  1 returned ff for ACK


        Error  2 returned ff for ACK


        Error  3 Unknown exception:list index out of range

Any Idea's?

Thanks,

[FlangeMonkey]

I ended up turning up a Pi and testing it. I can now pull the info.

[FlangeMonkey]

I've managed to get up to version 5.7, I cannot seem to understand what updates are needed to get further up. I'm looking at the below link and there doesn't appear to be a path. If I look at "all" there appears to be a path, but I'm seeing references to 2 bootloaders and 2/3CH and different countries.

https://service.z-wave.me/expertui/uzb- ... tml?hw=277

Can someone please confirm I have this right:
From 5.5 to 5.6 (Done)

• bootloader_UZB_from_05_05_to_7278_2MB.bin
• firmware_UZB_from_05_05_to_05_06.bin

To 5.7 (Done)

• bootloader_UZB_from_05_06_to_7278_2MB.bin
• UPD_FIRMWARE_UZB500_from_05_06_to_05_07.bin

From 5.7 to 5.7/40196

• do I need "UPD_BOOTLOADER_UZB_ZME_05_07_04000001_9d04.bin", "bootloader_UZB_from_05_07_to_7278_2MB.bin" or nether because I'm on 7278.
• I'm in the EU do I need "UPD_FIRMWARE_UZB500_3CH_X_from05_07_to_UZB500_05_07.bin"? It appears to change from 3CH to what I already have?

From 5.7/40196 to 5.27/40196

• bootloader_UZB_from_05_07_to_7278_2MB.bin < again do I need this?
• UPD_FIRMWARE_UZB_STATIC_2ch_ZME_05_07_04000001_ZME_05_1b_04000001.bin

From 5.27 to 5.36

• UPD_FIRMWARE_UZB_STATIC_2ch_ZME_05_1b_04000001_ZME_05_24_04000001.bin

I feel I only need "UPD_FIRMWARE_UZB_STATIC_2ch_ZME_05_07_04000001_ZME_05_1b_04000001.bin" and then "UPD_FIRMWARE_UZB_STATIC_2ch_ZME_05_1b_04000001_ZME_05_24_04000001.bin"?

Thanks,

[rafale77]

Yes you need to move to boot loader 40196 to go further.

[FlangeMonkey]

Thanks for the reply, can you please clarify? When you say 40196 and bootloader do you mean, the bootloader I already have "bootloader_UZB_from_05_06_to_7278_2MB.bin" or this one "UPD_BOOTLOADER_UZB_ZME_05_07_04000001_9d04.bin" due to the matching 04000001?

Thanks,

edit: 9d04 is 40196 in decimal, so I need bootloader: UPD_BOOTLOADER_UZB_ZME_05_07_04000001_9d04.bin??????

[rafale77]

Correct!

[PoltoS]

This crazy map can help you. Or break your mind

https://service.z-wave.me/expertui/uzb- ... ith_hidden