Update razberry firmware

[mdegroux]

Hello,

I'm trying to update my razberry's firmware
I'm not using z-way
With the update tool, I ran the command ./ZMESerialUpdater serialapi_uzbupdate -d /dev/ttyAMA0
It gave me VERSION: 05 25

But in the map of firmwares I don't see version 5.25

Thanks for your help

[enbemokel]

Wondering if this was hex?

[mdegroux]

Finally, its Hex. I have version 5.37 and bootlader 48059

but when I try to update, I have an error:

Code: Select all

pi@jeedom:~/ZMESerialUpdater/arm $ ./ZMESerialUpdater serialapi_uzbupdate -d /dev/ttyAMA0 -f UPD_FIRMWARE_Razberry_STATIC_2ch_ZME_05_25_04000002_ZME_05_27_04000002.bin


                                        Z-WAVE Serial API Tool
                                             Version:LWE0.9
                                             by Z-WAVE>ME


-->
Device ready in:3.07782196999 seconds
          FIRMWARE
Openning port                            ..............................                            OK
Writing NVM data                         ..............................                        FAILED

        Error  0 returned 1 for ACK


        Error  1 Unknown exception:Can't write NVM data! at=30200

[PoltoS]

Sure Z-Way (or other s/w using RaZberry) is stopped?

[vinisz]

I''m also puzzled about the whole firmware upgrade thing..
The command line is showing me this for UZB:

pi@raspberrypi:~/ZMESerialUpdater/arm $ ./ZMESerialUpdater serialapi_uzbupdate -d /dev/ttyACM0 | grep -E "(FREQ|VERSION)"
VERSION: 05 21 VENDOR: 01 15
FREQ: EU

Am I good with the firmware level ? I looked at the map but cannot find version 05.21 on it

[enbemokel]

https://service.z-wave.me/expertui/uzb- ... ith_hidden

You are on 05.33 seems a little outdated.

[vinisz]

Ok, but can I move forward all the way ?

[enbemokel]

Just make a backup of your sd card and try....I think I always updated some month late, when a new version is out.

[vinisz]

Just make a backup of your sd card and try....I think I always updated some month late, when a new version is out.

Backup of the SD card? we are talking about updating the firmware of the UZB device here, not about new software or Rpi firmware.
So I think backing up the sd card does not bring any value here.

[enbemokel]

Yes, you are right, my mistake. So just update and see what will happen. Your choice.