Update to Zway 3.2.0 crashed system
Re: Update to Zway 3.2.0 crashed system
Are you on Raspbian Stretch or Buster? The last build do not work with Stretch. We are looking in this issue.
Re: Update to Zway 3.2.0 crashed system
On Buster, do need logfile? Where to find?
Re: Update to Zway 3.2.0 crashed system
Directly after updating to 3.2.0 the commands
sudo /etc/init.d/z-way-server start
sudo LD_LIBRARY_PATH=./libs ./z-way-server
helped to start the Z-way server.
Now the following error message is generated:
sudo: ./z-way-server: Befehl nicht gefunden
sudo /etc/init.d/z-way-server start
sudo LD_LIBRARY_PATH=./libs ./z-way-server
helped to start the Z-way server.
Now the following error message is generated:
sudo: ./z-way-server: Befehl nicht gefunden
-
- Posts: 3
- Joined: 14 Sep 2021 00:00
Re: Update to Zway 3.2.0 crashed system
Found the solution - here: https://forum.z-wave.me/viewtopic.php?p=90995#p90995
Re: Update to Zway 3.2.0 crashed system
Thanks a lot!
I don't know why, but it worked - system is live again! Thanks to mosquitto.
I don't know why, but it worked - system is live again! Thanks to mosquitto.
Re: Update to Zway 3.2.0 crashed system
Sorry for the inconvenience. We have made our home work and are now testing the new v3.2.1 that is fixing errors introduced in v3.2.0. For the test purpose (while it is not in the repository yet) please use two commands:
Code: Select all
wget -q -O - https://storage.z-wave.me/RaspbianInstall | sudo bash
PKG=z-way-3.2.1_armhf.deb && wget -O /tmp/$PKG https://storage.z-wave.me/z-way-server/$PKG && sudo dpkg -i /tmp/$PKG
Re: Update to Zway 3.2.0 crashed system
Thanks for your efforts: The system is running again (on 3.2.1)
However, there some effects in the expert mode which are quite strange:
- It is no more possible to select device descriptions (e.g. for Fibaro devices like FGS-222) --> so all device specific configurations of parameters is no more possible (only using generic parameters with get/set)
- for some of the devices (e.g. Fibaro Implant or Fibaro Roller Shutter) the worksheets "configuration" and "association" are completely blank, no settings are possible at all.
How to fix these two issues?
However, there some effects in the expert mode which are quite strange:
- It is no more possible to select device descriptions (e.g. for Fibaro devices like FGS-222) --> so all device specific configurations of parameters is no more possible (only using generic parameters with get/set)
- for some of the devices (e.g. Fibaro Implant or Fibaro Roller Shutter) the worksheets "configuration" and "association" are completely blank, no settings are possible at all.
How to fix these two issues?
Re: Update to Zway 3.2.0 crashed system
For device descriptions go in ZDDX folder and run ./UpdateXMLs.sh
This is a bug and will be fixed in the next release.
The blank screen is certainly due to missing ZDDX
This is a bug and will be fixed in the next release.
The blank screen is certainly due to missing ZDDX
Re: Update to Zway 3.2.0 crashed system
Where to find the ZDDX folder?
Re: Update to Zway 3.2.0 crashed system
Thanks again,
the XMLupdate fixed the issues.
For other users:
pi@raspberrypi:/opt/z-way-server/ZDDX
the XMLupdate fixed the issues.
For other users:
pi@raspberrypi:/opt/z-way-server/ZDDX