I'm using some Fibaro Door/window sensors FGK-10x for long time. Now I had to exclude and include one of them again (security S0).
It works, it sends data, but I have some problems:
1. the device doesn't react on any Configuration Set. On Configuration Get it sends the old/default values.
I noticed that Zway uses 86/1=CRC16 Encapsulation instead of 152/129=Security Message Encapsulation for this command. The device uses CRC16 only for Sensor Reports.
Code: Select all
nodeInfoFrame: {
value: [
"34 Application Status",
"49 Sensor Multilevel",
"86 CRC16 Encap",
"89 Association Group Info",
"94 Z-Wave+ Info",
"114 Manufacturer Specific",
"115 Powerlevel",
"122 Firmware Update Md",
"128 Battery",
"134 Version",
"152 Security"
],
type: "binary",
invalidateTime: 1688665514,
updateTime: "1688665521 2023-07-06 19:45:21"
},
It seems to me that the commands stay in the job queue and are not forwarded to the device, even if I woke it up manually
Code: Select all
[[0.20000000298023224,[0,1,1,0,0,1,0,1,0,1,0,0,1,0,0,1,0,1,0,1,0,0,1,128,0,0,0],93,"Secure NIF Get",null,[93,2,152,2,5],1908423816,[\]],
[0.20000000298023224,[1,1,0,0,0,1,0,1,0,1,0,0,1,0,0,1,0,1,0,1,0,0,1,0,0,0,0],93,"Nonce Get","Not delivered to recipient",[93,2,152,64,5],1868655136,[\]],
[17.392953872680664,[1,0,0,0,1,1,1,1,1,0,0,0,0,0,1,0,0,0,0,0,0,0,1,0,0,0,1],0,"Get background noise level","RSSI Ch#1: -106 dBm, Ch#2: -111 dBm, Ch#3: -111 dBm",[],1904330680,[]]]
Code: Select all
{
"updateTime": "1689145443=2023-07-12 09:04:03, delivered=false",
"nodeId": "93=EN-Bad Fibaro Door/Window Sensor G5",
"speed": "40 kbps",
"route": "[1,93]",
"rssi": "[]",
"classCommand": "152=Security, 64=Security Nonce Get",
"index": "<3827>",
},
{
"duplicate": 0,
"updateTime": "1689145461=2023-07-12 09:04:21, frameType=singlecast",
"nodeId": "93=EN-Bad Fibaro Door/Window Sensor G5",
"route": "[93,6,1]",
"rssi": "-81 dBm",
"classCommand": "152=Security, 64=Security Nonce Get",
"index": "<3829>",
},
{
"updateTime": "1689145462=2023-07-12 09:04:22, delivered=true",
"nodeId": "93=EN-Bad Fibaro Door/Window Sensor G5",
"speed": "9.6 kbps",
"route": "[1,6,93]",
"rssi": "[-82 dBm,]",
"classCommand": "152=Security, 128=Security Nonce Report",
"value": "[152,128,82,181,113,32,138,252,202,42]",
"index": "<3830>",
},
{
"duplicate": 0,
"updateTime": "1689145462=2023-07-12 09:04:22, frameType=singlecast",
"nodeId": "93=EN-Bad Fibaro Door/Window Sensor G5",
"route": "[93,6,1]",
"rssi": "-81 dBm",
"classCommand": "152=Security, 129=Security Message Encapsulation, 132=Wake Up, 7=Wake Up Notification",
"index": "<3831>",
},
{
"duplicate": 0,
"updateTime": "1689145936=2023-07-12 09:12:16, frameType=singlecast",
"nodeId": "93=EN-Bad Fibaro Door/Window Sensor G5",
"route": "[93,6,1]",
"rssi": "-82 dBm",
"classCommand": "152=Security, 64=Security Nonce Get",
"index": "<3844>",
},
{
"updateTime": "1689145941=2023-07-12 09:12:21, delivered=true",
"nodeId": "93=EN-Bad Fibaro Door/Window Sensor G5",
"speed": "40 kbps",
"route": "[1,39,45,93]",
"rssi": "[-59 dBm,,not available]",
"classCommand": "152=Security, 128=Security Nonce Report",
"value": "[152,128,185,30,33,220,213,227,17,205]",
"index": "<3845>",
}
{
"duplicate": 0,
"updateTime": "1689147199=2023-07-12 09:33:19, frameType=singlecast",
"nodeId": "93=EN-Bad Fibaro Door/Window Sensor G5",
"route": "[93,45,39,1]",
"rssi": "-58 dBm",
"classCommand": "152=Security, 64=Security Nonce Get",
"index": "<3869>",
},
{
"updateTime": "1689147200=2023-07-12 09:33:20, delivered=true",
"nodeId": "93=EN-Bad Fibaro Door/Window Sensor G5",
"speed": "40 kbps",
"route": "[1,39,45,93]",
"rssi": "[-58 dBm,,not available]",
"classCommand": "152=Security, 128=Security Nonce Report",
"value": "[152,128,51,133,232,172,141,143,209,235]",
"index": "<3870>",
},
{
"duplicate": 0,
"updateTime": "1689147200=2023-07-12 09:33:20, frameType=singlecast",
"nodeId": "93=EN-Bad Fibaro Door/Window Sensor G5",
"route": "[93,45,39,1]",
"rssi": "-58 dBm",
"classCommand": "152=Security, 129=Security Message Encapsulation, 132=Wake Up, 7=Wake Up Notification",
"index": "<3871>",
}
Update: gone back to 4.1.0, cause on 4.1.0-27 my apps don't run any more (sockets undefined).