No favorite devices defined in Domoricz Dashboard
Posted: 25 Apr 2020 21:54
Hi,
my problem is that on the Domoticz Dashboard I read the warning "No favorite devices defined ... (Or communication Lost!)" and the Hardware and Devices tables are empty.
It is worth knowing that this is the result of a my mistake: the system, consisting of a Raspberry Pi3, a Z-wave Razberry module and mainly several Aeotec multi-sensors, worked regularly until a couple of months ago. One day I made the mistake of updating Domoticz without having updated Raspbian. Domoticz stopped working that day. I have made several attempts to recover the situation, without success.
So I decided to install a 2018 backup on the SD-H and, when I access Domoticz, I get a "No favorite devices defined ..." warning and I find the Hardware and devices tables empty.
I then tried to install an updated Raspian and the current version of Domoticz on the SD-E, but if I start the application I always get the "No favorite devices defined ..." warning and I find the Hardware and devices tables empty.
In summary, I have two SD card to operate and both with a Domoticz version of 2018, and with the current one, Domoticz does not seem to dialogue with the RaZberry module.
I contacted Aeotec support and they replied that I should recover all the paired hardware and devices, since the data resides on the Z-wave module, but I don't know how to proceed and the Aeotec interlocutor is perhaps unable to help me further.
Can I somehow access the RaZberry, maybe with an SSH command, to verify that there are data of my devices?
What do you recommend to do to solve the problem)?
Claudio
my problem is that on the Domoticz Dashboard I read the warning "No favorite devices defined ... (Or communication Lost!)" and the Hardware and Devices tables are empty.
It is worth knowing that this is the result of a my mistake: the system, consisting of a Raspberry Pi3, a Z-wave Razberry module and mainly several Aeotec multi-sensors, worked regularly until a couple of months ago. One day I made the mistake of updating Domoticz without having updated Raspbian. Domoticz stopped working that day. I have made several attempts to recover the situation, without success.
So I decided to install a 2018 backup on the SD-H and, when I access Domoticz, I get a "No favorite devices defined ..." warning and I find the Hardware and devices tables empty.
I then tried to install an updated Raspian and the current version of Domoticz on the SD-E, but if I start the application I always get the "No favorite devices defined ..." warning and I find the Hardware and devices tables empty.
In summary, I have two SD card to operate and both with a Domoticz version of 2018, and with the current one, Domoticz does not seem to dialogue with the RaZberry module.
I contacted Aeotec support and they replied that I should recover all the paired hardware and devices, since the data resides on the Z-wave module, but I don't know how to proceed and the Aeotec interlocutor is perhaps unable to help me further.
Can I somehow access the RaZberry, maybe with an SSH command, to verify that there are data of my devices?
What do you recommend to do to solve the problem)?
Claudio