Page 5 of 15
Sometimes it helps if you
Posted: 04 Mar 2013 02:41
by pz1
Sometimes it helps if you first try to Exclude the device, and then push the Re-include device button.
dlc
Posted: 04 Mar 2013 02:41
by pacaj2am
what was the problem with DLC nad how was IT sloved?
tank tou for updates and development...
Can't include düwi z-wave wall controller anymore
Posted: 04 Mar 2013 02:41
by lpreschke
I had an old razberry installation (installed in march) working.
I installed the current version (1.3.1) on a new sd card. Now I can't include my düwi z-wave wall controller anymore
.
The old version inclueded an exlcuded the controllers without any problems. The new version doesn't.
Any hints for me?
Please provide us with the
Posted: 04 Mar 2013 02:41
by PoltoS
Please provide us with the log during inclusion
LOG current version (1.3.1) failed inclusion
Posted: 04 Mar 2013 02:41
by lpreschke
[2013-06-13 23:17:14.648] Adding job: Add/re-include node to network
[2013-06-13 23:17:14.657] SENDING (cb 0x02): ( 01 05 00 4A 41 02 F3 )
[2013-06-13 23:17:14.676] RECEIVED ACK
[2013-06-13 23:17:14.689] RECEIVED: ( 01 07 00 4A 02 01 00 00 B1 )
[2013-06-13 23:17:14.698] SENT ACK
[2013-06-13 23:17:14.700] SETDATA controller.data.lastIncludedDevice = Empty
[2013-06-13 23:17:14.701] SETDATA controller.data.lastExcludedDevice = Empty
[2013-06-13 23:17:14.702] Job 0x4a (Add/re-include node to network): Ready to add - push button on the device to be added
[2013-06-13 23:17:14.703] SETDATA controller.data.controllerState = 1 (0x00000001)
[2013-06-13 23:17:33.616] Job 0x4a (Add/re-include node to network): Job not removed before timeout (awaiting for more callbacks?)
[2013-06-13 23:17:33.618] Job 0x4a (Add/re-include node to network): Cancelling
[2013-06-13 23:17:33.619] Job 0x4a (Add/re-include node to network): fail
[2013-06-13 23:17:33.621] Adding job: Add/re-include node to network
[2013-06-13 23:17:33.634] SENDING (cb 0xc5): ( 01 04 00 4A C5 74 )
[2013-06-13 23:17:33.653] RECEIVED ACK
[2013-06-13 23:17:33.655] Removing job: Add/re-include node to network
[2013-06-13 23:17:33.700] RECEIVED: ( 01 07 00 4A 02 06 00 00 B6 )
[2013-06-13 23:17:33.712] SENT ACK
[2013-06-13 23:17:33.714] Job 0x4a (Add/re-include node to network): Done
[2013-06-13 23:17:33.716] SETDATA controller.data.controllerState = 0 (0x00000000)
[2013-06-13 23:17:33.717] Removing job: Add/re-include node to network
[2013-06-13 23:17:52.577] Job 0x4a: deleted from queue
[2013-06-13 23:17:52.613] Job 0x4a: deleted from queue
LOG older version sucessfull inclusion
Posted: 04 Mar 2013 02:41
by lpreschke
[2013-06-13 22:59:04.102] Adding job: Add/re-include node to network
[2013-06-13 22:59:04.107] SENDING: ( 01 05 00 4A C1 5F 2E )
[2013-06-13 22:59:04.127] RECEIVED ACK
[2013-06-13 22:59:04.139] RECEIVED: ( 01 07 00 4A 5F 01 00 00 EC )
[2013-06-13 22:59:04.149] SENT ACK
[2013-06-13 22:59:04.149] SETDATA controller.data.lastIncludedDevice = Empty
[2013-06-13 22:59:04.152] SETDATA controller.data.lastExcludedDevice = Empty
[2013-06-13 22:59:04.153] Job 0x4a (Add/re-include node to network): Ready to add - push button on the device to be added
[2013-06-13 22:59:04.154] SETDATA controller.data.controllerState = 1 (0x00000001)
[2013-06-13 22:59:16.189] RECEIVED: ( 01 07 00 4A 5F 02 00 00 EF )
[2013-06-13 22:59:16.200] SENT ACK
[2013-06-13 22:59:16.202] Job 0x4a (Add/re-include node to network): Node found: #0
[2013-06-13 22:59:16.204] SETDATA controller.data.controllerState = 2 (0x00000002)
[2013-06-13 22:59:16.543] RECEIVED: ( 01 13 00 4A 5F 04 19 0C 01 01 01 72 80 85 EF 20 26 27 85 82 57 )
[2013-06-13 22:59:16.560] SENT ACK
[2013-06-13 22:59:16.561] Job 0x4a (Add/re-include node to network): Adding controller: #25
[2013-06-13 22:59:16.563] SETDATA controller.data.controllerState = 3 (0x00000003)
[2013-06-13 22:59:16.564] SETDATA controller.data.lastIncludedDevice = 25 (0x00000019)
[2013-06-13 22:59:16.565] SETDATA devices.25.data = Empty
[2013-06-13 22:59:16.567] SETDATA devices.25.instances.0.data = Empty
[2013-06-13 22:59:16.569] SETDATA devices.25.instances.0.data.dynamic = Empty
[2013-06-13 22:59:16.570] SETDATA devices.25.instances.0.data.dynamic = False
[2013-06-13 22:59:16.571] SETDATA devices.25.instances.0.data.genericType = Empty
...
Any news on this?
Posted: 04 Mar 2013 02:41
by lpreschke
Any news on this?
I have the same problem :(
Posted: 04 Mar 2013 02:41
by jzapater
I have the same problem
We need a solution.
Thanks.
Roadmap
Posted: 04 Mar 2013 02:41
by pz1
Can we have an update for the roadmap (
http://razberry.zwave.me/roadmap.php)?
There is nothing critical
Posted: 04 Mar 2013 02:41
by PoltoS
There is nothing critical about the log. RaZberry just do not see the device to be included. Please try first to exclude it. If it succeed, include it.