Failed to open device: Permission denied

Discussions about RaZberry - Z-Wave board for Raspberry computer
Post Reply
willie-p
Posts: 5
Joined: 20 Oct 2013 17:44

Failed to open device: Permission denied

Post by willie-p »

I just bought a razberry and tried to install the software but I can't get is to work.
Does anybody knows how to solve this?

Log:
pi@raspbmc:~/z-way-server$ LD_LIBRARY_PATH=libs
Z-Way version v1.4-14-g5d22670 from 2013-10-17 00:26:18 +0400 (build 5d226706fd3d026ab89696e66c15268ce4e70977)
Using default configuration file config.xml
Failed to open log file: 13
Failed to open http log file: 13
Starting Z-Way for device /dev/ttyAMA0...
[2013-10-20 16:39:41.279] SETDATA controller.data = Empty
[2013-10-20 16:39:41.286] SETDATA controller.data.nodeId = Empty
[2013-10-20 16:39:41.287] SETDATA controller.data.homeId = Empty
[2013-10-20 16:39:41.288] SETDATA controller.data.SUCNodeId = Empty
[2013-10-20 16:39:41.290] SETDATA controller.data.isPrimary = Empty
[2013-10-20 16:39:41.291] SETDATA controller.data.isInOthersNetwork = Empty
[2013-10-20 16:39:41.292] SETDATA controller.data.isRealPrimary = Empty
[2013-10-20 16:39:41.293] SETDATA controller.data.isSUC = Empty
[2013-10-20 16:39:41.294] SETDATA controller.data.SISPresent = Empty
[2013-10-20 16:39:41.294] SETDATA controller.data.libType = Empty
[2013-10-20 16:39:41.296] SETDATA controller.data.SDK = Empty
[2013-10-20 16:39:41.296] SETDATA controller.data.ZWlibMajor = Empty
[2013-10-20 16:39:41.296] SETDATA controller.data.ZWlibMinor = Empty
[2013-10-20 16:39:41.297] SETDATA controller.data.ZWVersion = Empty
[2013-10-20 16:39:41.298] SETDATA controller.data.ZWaveChip = Empty
[2013-10-20 16:39:41.298] SETDATA controller.data.APIVersion = Empty
[2013-10-20 16:39:41.299] SETDATA controller.data.manufacturerId = Empty
[2013-10-20 16:39:41.299] SETDATA controller.data.vendor = Empty
[2013-10-20 16:39:41.301] SETDATA controller.data.manufacturerProductType = Empty
[2013-10-20 16:39:41.302] SETDATA controller.data.manufacturerProductId = Empty
[2013-10-20 16:39:41.302] SETDATA controller.data.capabilities = Empty
[2013-10-20 16:39:41.303] SETDATA controller.data.controllerState = Empty
[2013-10-20 16:39:41.303] SETDATA controller.data.nonManagmentJobs = Empty
[2013-10-20 16:39:41.304] SETDATA controller.data.lastIncludedDevice = Empty
[2013-10-20 16:39:41.304] SETDATA controller.data.lastExcludedDevice = Empty
[2013-10-20 16:39:41.305] SETDATA controller.data.oldSerialAPIAckTimeout10ms = Empty
[2013-10-20 16:39:41.306] SETDATA controller.data.oldSerialAPIByteTimeout10ms = Empty
[2013-10-20 16:39:41.307] SETDATA controller.data.curSerialAPIAckTimeout10ms = Empty
[2013-10-20 16:39:41.307] SETDATA controller.data.curSerialAPIByteTimeout10ms = Empty
[2013-10-20 16:39:41.315] SETDATA controller.data.libVersionId = Empty
[2013-10-20 16:39:41.316] SETDATA controller.data.countJobs = Empty
[2013-10-20 16:39:41.317] SETDATA controller.data.memoryGetAddress = Empty
[2013-10-20 16:39:41.317] SETDATA controller.data.memoryGetData = Empty
[2013-10-20 16:39:41.318] SETDATA controller.data.functionClasses = Empty
[2013-10-20 16:39:41.319] SETDATA controller.data.functionClassesNames = Empty
[2013-10-20 16:39:41.320] SETDATA controller.data.softwareRevisionVersion = Empty
[2013-10-20 16:39:41.320] SETDATA controller.data.softwareRevisionId = Empty
[2013-10-20 16:39:41.321] SETDATA controller.data.softwareRevisionDate = Empty
[2013-10-20 16:39:41.321] SETDATA controller.data.nodeId = 0 (0x00000000)
[2013-10-20 16:39:41.322] SETDATA controller.data.homeId = 0 (0x00000000)
[2013-10-20 16:39:41.323] SETDATA controller.data.SUCNodeId = 0 (0x00000000)
[2013-10-20 16:39:41.324] SETDATA controller.data.isPrimary = False
[2013-10-20 16:39:41.325] SETDATA controller.data.isInOthersNetwork = False
[2013-10-20 16:39:41.327] SETDATA controller.data.isRealPrimary = False
[2013-10-20 16:39:41.328] SETDATA controller.data.isSUC = False
[2013-10-20 16:39:41.328] SETDATA controller.data.SISPresent = False
[2013-10-20 16:39:41.329] SETDATA controller.data.libType = 0 (0x00000000)
[2013-10-20 16:39:41.330] SETDATA controller.data.ZWlibMajor = 0 (0x00000000)
[2013-10-20 16:39:41.330] SETDATA controller.data.ZWlibMinor = 0 (0x00000000)
[2013-10-20 16:39:41.331] SETDATA controller.data.ZWVersion = 0 (0x00000000)
[2013-10-20 16:39:41.331] SETDATA controller.data.manufacturerId = 0 (0x00000000)
[2013-10-20 16:39:41.332] SETDATA controller.data.manufacturerProductType = 0 (0x00000000)
[2013-10-20 16:39:41.333] SETDATA controller.data.manufacturerProductId = 0 (0x00000000)
[2013-10-20 16:39:41.333] SETDATA controller.data.controllerState = 0 (0x00000000)
[2013-10-20 16:39:41.334] SETDATA controller.data.nonManagmentJobs = 0 (0x00000000)
[2013-10-20 16:39:41.334] SETDATA controller.data.oldSerialAPIAckTimeout10ms = 0 (0x00000000)
[2013-10-20 16:39:41.336] SETDATA controller.data.oldSerialAPIByteTimeout10ms = 0 (0x00000000)
[2013-10-20 16:39:41.336] SETDATA controller.data.curSerialAPIAckTimeout10ms = 0 (0x00000000)
[2013-10-20 16:39:41.336] SETDATA controller.data.curSerialAPIByteTimeout10ms = 0 (0x00000000)
[2013-10-20 16:39:41.337] SETDATA controller.data.libVersionId = 1 (0x00000001)
[2013-10-20 16:39:41.337] SETDATA controller.data.countJobs = False
[2013-10-20 16:39:41.338] SETDATA controller.data.softwareRevisionVersion = "v1.4-14-g5d22670"
[2013-10-20 16:39:41.339] SETDATA controller.data.softwareRevisionId = "5d226706fd3d026ab89696e66c15268ce4e70977"
[2013-10-20 16:39:41.340] SETDATA controller.data.softwareRevisionDate = "2013-10-17 00:26:18 +0400"
[2013-10-20 16:39:41.341] SETDATA controller.data.functionClasses = int[43]
[2013-10-20 16:39:41.342] [00] 2
[2013-10-20 16:39:41.343] [01] 3
[2013-10-20 16:39:41.344] [02] 4
[2013-10-20 16:39:41.344] [03] 5
[2013-10-20 16:39:41.345] [04] 6
[2013-10-20 16:39:41.346] [05] 7
[2013-10-20 16:39:41.346] [06] 8
[2013-10-20 16:39:41.346] [07] 18
[2013-10-20 16:39:41.347] [08] 19
[2013-10-20 16:39:41.347] [09] 21
[2013-10-20 16:39:41.356] [10] 22
[2013-10-20 16:39:41.356] [11] 32
[2013-10-20 16:39:41.357] [12] 33
[2013-10-20 16:39:41.357] [13] 34
[2013-10-20 16:39:41.358] [14] 35
[2013-10-20 16:39:41.358] [15] 36
[2013-10-20 16:39:41.358] [16] 65
[2013-10-20 16:39:41.359] [17] 66
[2013-10-20 16:39:41.359] [18] 70
[2013-10-20 16:39:41.360] [19] 71
[2013-10-20 16:39:41.361] [20] 72
[2013-10-20 16:39:41.361] [21] 73
[2013-10-20 16:39:41.362] [22] 74
[2013-10-20 16:39:41.363] [23] 75
[2013-10-20 16:39:41.363] [24] 76
[2013-10-20 16:39:41.365] [25] 77
[2013-10-20 16:39:41.367] [26] 80
[2013-10-20 16:39:41.367] [27] 81
[2013-10-20 16:39:41.368] [28] 82
[2013-10-20 16:39:41.369] [29] 83
[2013-10-20 16:39:41.370] [30] 84
[2013-10-20 16:39:41.370] [31] 85
[2013-10-20 16:39:41.371] [32] 86
[2013-10-20 16:39:41.371] [33] 87
[2013-10-20 16:39:41.371] [34] 96
[2013-10-20 16:39:41.372] [35] 97
[2013-10-20 16:39:41.373] [36] 98
[2013-10-20 16:39:41.373] [37] 99
[2013-10-20 16:39:41.374] [38] 128
[2013-10-20 16:39:41.374] [39] 210
[2013-10-20 16:39:41.375] [40] 211
[2013-10-20 16:39:41.375] [41] 242
[2013-10-20 16:39:41.376] [42] 243
[2013-10-20 16:39:41.376] SETDATA controller.data.functionClassesNames = string[43]
[2013-10-20 16:39:41.378] [00] "SerialAPIGetInitData"
[2013-10-20 16:39:41.378] [01] "SerialAPIApplicationNodeInformation"
[2013-10-20 16:39:41.379] [02] "ApplicationCommandHandler"
[2013-10-20 16:39:41.379] [03] "GetControllerCapabilities"
[2013-10-20 16:39:41.380] [04] "SerialAPISetTimeouts"
[2013-10-20 16:39:41.380] [05] "GetSerialAPICapabilities"
[2013-10-20 16:39:41.381] [06] "SerialAPISoftReset"
[2013-10-20 16:39:41.381] [07] "SendNodeInformation"
[2013-10-20 16:39:41.382] [08] "SendData"
[2013-10-20 16:39:41.383] [09] "GetVersion"
[2013-10-20 16:39:41.383] [10] "SendDataAbort"
[2013-10-20 16:39:41.384] [11] "GetHomeId"
[2013-10-20 16:39:41.384] [12] "MemoryGetByte"
[2013-10-20 16:39:41.385] [13] "MemoryPutByte"
[2013-10-20 16:39:41.386] [14] "MemoryGetBuffer"
[2013-10-20 16:39:41.386] [15] "MemoryPutBuffer"
[2013-10-20 16:39:41.387] [16] "GetNodeProtocolInformation"
[2013-10-20 16:39:41.387] [17] "SetDefault"
[2013-10-20 16:39:41.395] [18] "AssignReturnRoute"
[2013-10-20 16:39:41.396] [19] "DeleteReturnRoute"
[2013-10-20 16:39:41.396] [20] "RequestNodeNeighbourUpdate"
[2013-10-20 16:39:41.397] [21] "ApplicationNodeUpdate"
[2013-10-20 16:39:41.397] [22] "AddNodeToNetwork"
[2013-10-20 16:39:41.398] [23] "RemoveNodeFromNetwork"
[2013-10-20 16:39:41.399] [24] "CreateNewPrimary"
[2013-10-20 16:39:41.399] [25] "ControllerChange"
[2013-10-20 16:39:41.400] [26] "SetLearnMode"
[2013-10-20 16:39:41.400] [27] "AssignSUCReturnRoute"
[2013-10-20 16:39:41.401] [28] "EnableSUC"
[2013-10-20 16:39:41.401] [29] "RequestNetworkUpdate"
[2013-10-20 16:39:41.402] [30] "SetSUCNodeId"
[2013-10-20 16:39:41.402] [31] "DeleteSUCReturnRoute"
[2013-10-20 16:39:41.403] [32] "GetSUCNodeId"
[2013-10-20 16:39:41.403] [33] "SendSUCNodeId"
[2013-10-20 16:39:41.404] [34] "RequestNodeInformation"
[2013-10-20 16:39:41.408] [35] "RemoveFailedNode"
[2013-10-20 16:39:41.408] [36] "IsFailedNode"
[2013-10-20 16:39:41.408] [37] "ReplaceFailedNode"
[2013-10-20 16:39:41.409] [38] "GetRoutingTableLine"
[2013-10-20 16:39:41.409] [39] "WatchDogStart"
[2013-10-20 16:39:41.409] [40] "WatchDogStop"
[2013-10-20 16:39:41.409] [41] "ZMEFreqChange"
[2013-10-20 16:39:41.410] [42] "ZMERestore"
[2013-10-20 16:39:41.411] Failed to open device: Permission denied
failed to start ZWay: Can not open port (-20)



Thanks in advance!
Willie-P
Top
willie-p
Posts: 5
Joined: 20 Oct 2013 17:44

When I use the ./z-way-server

Post by willie-p »

When I use the ./z-way-server command I get this error:
error while loading shared libraries: libzwayhttp.so: cannot open shared object file: No such file or directory
Top
willie-p
Posts: 5
Joined: 20 Oct 2013 17:44

When is use sudo I get this

Post by willie-p »

When is use sudo I get this error:

sudo LD_LIBRARY_PATH=libs ./z-way-server
Z-Way version v1.4-14-g5d22670 from 2013-10-17 00:26:18 +0400 (build 5d226706fd3d026ab89696e66c15268ce4e70977)
Using default configuration file config.xml
Starting Z-Way for device /dev/ttyAMA0...
failed to discover ZWay: Wrong packet from Z-Wave network or Discovery got bad data (stick communication failed) (-9)
Top
pz1
Posts: 2053
Joined: 08 Apr 2012 13:44

There were problems with a

Post by pz1 »

There were problems with a recently delivered batch of sticks. There is a message somewhere on this forum. If I remember correctly you can contact your supplier for a replacement.
Since 29-12-2016 I am no longer a moderator for this forum
Top
ollfa
Posts: 31
Joined: 12 Jul 2013 11:36

Raspbmc

Post by ollfa »

You're using Raspbmc? I dont think comes with libs for GPIO. You can install it yourself or you can use Openelec instead. I recommend using Openelec, it's easier to install than the missing libs... I've made a "howto openelec", which is pinned in the forum!
Top
willie-p
Posts: 5
Joined: 20 Oct 2013 17:44

Thanks for the info pz1.

Post by willie-p »

Thanks for the info pz1.
I contact my supplier.
Top
willie-p
Posts: 5
Joined: 20 Oct 2013 17:44

I also used a "normal" wheezy

Post by willie-p »

I also used a "normal" wheezy image with the same result.
And I followed your howto.

I still think it's hardware related....
Thank you anyway!

Cheers!
Top
Post Reply

Return to “RaZberry”