LUMINANCE Channel and Temp Channel Problem
Posted: 17 Sep 2017 19:27
Hi there,
I'm running a Z-Uno with BME280/BH1750 Sensor for Temp/Hum/Pressure/Light which works quite good with Z-Way but I have 2 problems.
1) I defined the Light Channel as follows with a "word" as return for the getter. Zway shows this a percentage (the value itself seems to be lux). Is this a fault of the Z-Uno or Z-Way?
ZUNO_SENSOR_MULTILEVEL(ZUNO_SENSOR_MULTILEVEL_TYPE_LUMINANCE,
SENSOR_MULTILEVEL_SCALE_LUX,
SENSOR_MULTILEVEL_SIZE_TWO_BYTES,
SENSOR_MULTILEVEL_PRECISION_ZERO_DECIMALS,
getterLight)
2) Z-Way detects 5 channels instead of 4. The Temperature channel is doubled. Both channels shows the same value. Same questions here, is this a problem of the Z-Uno or Z-Way?
I use Z-Uno SDK 2.1.0 and Z-Way from 28-07-2017 12:06:03 with an Razberry.
Thank you!
Bye
I'm running a Z-Uno with BME280/BH1750 Sensor for Temp/Hum/Pressure/Light which works quite good with Z-Way but I have 2 problems.
1) I defined the Light Channel as follows with a "word" as return for the getter. Zway shows this a percentage (the value itself seems to be lux). Is this a fault of the Z-Uno or Z-Way?
ZUNO_SENSOR_MULTILEVEL(ZUNO_SENSOR_MULTILEVEL_TYPE_LUMINANCE,
SENSOR_MULTILEVEL_SCALE_LUX,
SENSOR_MULTILEVEL_SIZE_TWO_BYTES,
SENSOR_MULTILEVEL_PRECISION_ZERO_DECIMALS,
getterLight)
2) Z-Way detects 5 channels instead of 4. The Temperature channel is doubled. Both channels shows the same value. Same questions here, is this a problem of the Z-Uno or Z-Way?
I use Z-Uno SDK 2.1.0 and Z-Way from 28-07-2017 12:06:03 with an Razberry.
Thank you!
Bye