Issue, enabling the SmartHome software to work with the RazBerry2 module is not working. Following Error message persists:
Setup:An unexpected error occurred while initialising the Z-Wave controller data.
Please check
1.) if the controller is plugged in correctly,
2.) that in the app 'Z-Wave Network Access' the right port is entered
(UZB: '/dev/ttyACM0', Box: '/dev/ttyAMA0', UZB-Windows: '\\.\COM3', Z-Stick: '/dev/ttyUSB0', embedded boxes: '/dev/ttyS0' or '/dev/ttyS1')
3.) the app is aktiv. If not you could activate it under Menu > Apps > Activ or add a new one under Menu > Apps > Local.
The Setting 'Expert View' needs to be active under Menu > My Settings.
Raspberry Pi 3 Model B with the default community build of Raspian (upgraded to latest)
RazBerry2 modulePRETTY_NAME="Raspbian GNU/Linux 9 (stretch)"
NAME="Raspbian GNU/Linux"
VERSION_ID="9"
VERSION="9 (stretch)"
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"
SW installed with the command: wget -q -O - razberry.z-wave.me/install | sudo bash
Work done to resolve issues so far:
1# First issue was that the mylocalip:8083 didn't open at all, but this topic pointed out that there is some issue with the raspian version:
viewtopic.php?f=3422&t=25380&hilit=stretch
After running these lines, I was able to access the UI:
wget http://mirrordirector.raspbian.org/rasp ... _armhf.deb
sudo dpkg -i libssl1.0.0_1.0.1t-1+deb8u6_armhf.deb
2# I found this post:
viewtopic.php?t=25274
And of course following the instructions on the error message.
The bluetooth is off, as that is done by the installation script.
I've tried the different options in the error message, but still the error persists. Additionally when I try to enter e.g. /dev/ttyS1 I get additional error pop-up from UI "Something went wrong".
At the moment, I don't know what else to do. To me it seems that the homeautomation software is not able to find the RazBerry2 module at all.