issue with bootloader z-uno

Discussion about Z-Uno product. Visit http://z-uno.z-wave.me for more details.
Post Reply
jessy
Posts: 4
Joined: 21 Jan 2020 02:42

issue with bootloader z-uno

Post by jessy »

hi all,

so i am currently am having the following issues

I am running Arduino ide 1.8.19, I believe I have a first gen zuno as it looks like this




When I try to burn bootloader in Arduino I get this error

Arduino: 1.8.19 (Windows Store 1.8.57.0) (Windows 10), Board: "Z-Wave>ME Z-Uno, Russian, Disabled, Disabled, Disabled"



Openning port .............................. OK

Closing port .............................. OK

ERROR: It's not ZUNO G1 connected to port:COM3.

Closing port .............................. OK

Openning port .............................. OK

[ *] ..............................Error while burning bootloader.

Syncing with Z-Uno .............................. FAILED







**** **** **** **** **** *

* * * * * * * * * *

* * * * * * * * * *

**** *** *** * * *** *

* * * * * * * * *

**** * * * * **** * * *







Error 0 Can't sync with Z-Uno bootloader. It doesn't respond!

Closing port .............................. OK



This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

So then I try to do it using the gen 2 standards

Arduino: 1.8.19 (Windows Store 1.8.57.0) (Windows 10), Board: "Z-Wave>ME Z-Uno2, Russian, Normal +0dBm, Disabled, Disabled, Enabled"

*** ZME Z-UNO G2 preprocessor. Platform:Windows Version:0.40b1 ***

BOOTLOADER

Openning port .............................. OK

Syncing with Z-Uno .............................. FAILED



Error 0 Can't sync with Z-Uno bootloader. It doesn't respond!

Error while burning bootloader.

Closing port .............................. OK



Error 1 Can't request board information! ErrCode=-1



This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

If I run the recommended 1.6.5 for gen 1 I get this

Arduino: 1.6.5 (Windows 8.1), Board: "Z-Wave>ME Z-Uno, Russian, Disabled, Disabled, Disabled"

Openning port ..............................
Openning port .............................. OK


Closing port ..............................
Closing port .............................. OK

ERROR: It's not ZUNO G1 connected to port:COM3.


Closing port ..............................
Closing port .............................. OK


Openning port ..............................
Openning port .............................. OK


Syncing with Z-Uno ..............................
[ * ] ..............................
[ *] ..............................
[ * ] ..............................
[* ] ..............................
[ * ] ..............................
[ *] ..............................
[ * ] ..............................
[* ] ..............................
[ * ] ..............................
[ *] ..............................
[ * ] ..............................
[* ] ..............................
[ * ] ..............................
[ *] ..............................
[ * ] ..............................
[* ] ..............................
[ * ] ..............................
[ *] ..............................
[ * ] ..............................
[* ] ..............................
[ * ] ..............................
[ *] ..............................
[ * ] ..............................
[* ] ..............................
[ * ] ..............................
[ *] ..............................
[ * ] ..............................
[* ] ..............................
[ * ] ..............................
[ *] ..............................
[ * ] ..............................
[* ] ..............................
[ * ] ..............................
[ *] ..............................
[ * ] ..............................
[* ] ..............................
[ * ] ..............................
[ *] ..............................
[ * ] ..............................
[* ] ..............................
[ * ] ..............................
[ *] ..............................
[ * ] ..............................
[* ] ..............................
[ * ] ..............................
[ *] ..............................
[ * ] ..............................
[* ] ..............................
[ * ] ..............................
[ *] ..............................Error while burning bootloader.


Syncing with Z-Uno .............................. FAILED







**** **** **** **** **** *

* * * * * * * * * *

* * * * * * * * * *

**** *** *** * * *** *

* * * * * * * * *

**** * * * * **** * * *







Error 0 Can't sync with Z-Uno bootloader. It doesn't respond!


Closing port ..............................
Closing port .............................. OK

This report would have more information with
"Show verbose output during compilation"
enabled in File > Preferences.

And again this is with gen 2 standards


Arduino: 1.6.5 (Windows 8.1), Board: "Z-Wave>ME Z-Uno2, Russian, Normal +0dBm, Disabled, Disabled, Enabled"

*** ZME Z-UNO G2 preprocessor. Platform:Windows Version:0.40b1 ***

BOOTLOADER


Openning port ..............................
Openning port .............................. OK


Syncing with Z-Uno ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [ *] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [* ] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [ *] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [* ] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [ *] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [* ] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [ *] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [* ] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [ *] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [* ] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [ *] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [* ] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [ *] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [* ] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [ *] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [* ] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [ *] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [* ] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [ *] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [* ] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [ *] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [* ] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [ *] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [* ] ..............................
Syncing with Z-Uno ('RST' btn?) [ * ] ..............................
Syncing with Z-Uno ('RST' btn?) [ *] ..............................Error while burning bootloader.


Syncing with Z-Uno .............................. FAILED



Error 0 Can't sync with Z-Uno bootloader. It doesn't respond!


Closing port ..............................
Closing port .............................. OK



Error 1 Can't request board information! ErrCode=-1

This report would have more information with
"Show verbose output during compilation"
enabled in File > Preferences.

I have also tried hitting the reset button during, 2 different boards as I have 4, there are no issues in device manager and I have also tried a few different usb cable

Is there anything I am missing?
User avatar
PoltoS
Posts: 7624
Joined: 26 Jan 2011 19:36

Re: issue with bootloader z-uno

Post by PoltoS »

Try to hold the BTN and short press reset. This will go in rescue mode.
jessy
Posts: 4
Joined: 21 Jan 2020 02:42

Re: issue with bootloader z-uno

Post by jessy »

yeah no luck, it flashed red then went back to flashing green, even when i tried to do it while doing bootloader
do i have to flash bootloader back onto it?
User avatar
PoltoS
Posts: 7624
Joined: 26 Jan 2011 19:36

Re: issue with bootloader z-uno

Post by PoltoS »

Please try to burn the bootloader.
jessy
Posts: 4
Joined: 21 Jan 2020 02:42

Re: issue with bootloader z-uno

Post by jessy »

Ok I'll look up how to do that, unless you have a forum link handy
Post Reply