What firmware version do I have? (re: ZMESerialUpdater output inside...)

[sofakng]

I've purchased a RaZberry2 and I'm currently exploring OpenZWave and Home Assistant but might also try Z-Way. (I'm not sure why Home Assistant doesn't support integration with Z-Way? It seems like great Z-Wave controller software...)

Regardless, I'd like to update the firmware if possible. Here is the output from ZMESerialUpdater:

Code: Select all

                                        Z-WAVE Serial API Tool
                                             Version:LWE0.9
                                             by Z-WAVE>ME


-->
Device ready in:3.06492495537 seconds
          FULL INFO
Openning port                            ..............................                            OK


          SERIAL INFO
                 VERSION:  05 25  VENDOR:  01 47

          ZME_CAPABILITIES
                     UID:  98 36 A8 B4 9E 44 21 A3 0A 44 A1 98 DA 8B EA DD
                  VENDOR:  00 00   NODES: FF
                   FLAGS:  05 00 00 00 00 00 00 00 00 00 00 00 00

          FIRMWARE CRC
                    BOOT:  BB BB      FW:  C1 A5
          MISC
                    FREQ:  US

                                         NVR Content
          --------------------------------------------------------------------------------------------
          Prog/erase lock :  FF FF FF FF FF FF FF FF, Read back lock: FF
          Rev 02, Cal 07, TXCal  15 11, SAW  FF FF FF FF, Pin FF, CRC  F3 C3
          NMV: CS 04, TYPE 02, SIZE  01 00, PSIZE  01 00 (EEPROM M25PE20)
          USB: VID  FF FF, PID  FF FF, UUID  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          --------------------------------------------------------------------------------------------
          FACTORY ID: WEEK 26, YEAR 19, CHIP  06 AE, SER  93 FC, WS 111, HWREV: 00 05, CRC8 5B

          elapsed 5.46522903442 seconds

It looks like the version is v05.25? If so, how do I decipher the map of available firmwares to see what I need to upgrade to? (I don't see 05.25 in the map)

[sofakng]

Nevermind ... I installed Z-Way on a different MicroSD card and I upgraded the firmware through the GUI.