Since this morning, my Zway system suddenly doesn't work anymore.
I'm getting these messages:
[zway] Job 0x07 (Get controller info and supported function classes): No ACK received before timeout
[core] Error: Bad data - communication failed
[core] Tried 5 times without success. Stopping tries.
[core] Notification: critical (z-wave): Cannot start Z-Wave binding: Error: Bad data - communication failed
I have searched the forum but have not found anything that would have helped me.
Also an upgrade to zway 4.0.2 and reboot didn't help.
Any ideas?
Cannot start Z-Wave binding: Error: Bad data - communication failed
Cannot start Z-Wave binding: Error: Bad data - communication failed
Raspberry Pi 3 Model B Rev 1.2
Raspbian GNU/Linux 10 (buster, 32bit)
RaZberry by Z-Wave.Me(327) ZW0700 7.21.00 07.42/1766938484 1025/257
Z-Way version v4.1.2 from 2023-10-18 03:34:26 +0300
Raspbian GNU/Linux 10 (buster, 32bit)
RaZberry by Z-Wave.Me(327) ZW0700 7.21.00 07.42/1766938484 1025/257
Z-Way version v4.1.2 from 2023-10-18 03:34:26 +0300
Re: Cannot start Z-Wave binding: Error: Bad data - communication failed
Some more info to the problem:
after 23:00 last day, the log was flooded with the messages:
[2023-02-21 23:02:08.777] [zway] Adding job: Get background noise level
[2023-02-21 23:02:08.984] [zway] Job 0x3b (Get background noise level): No ACK received before timeout
[2023-02-21 23:02:09.189] [zway] Job 0x3b (Get background noise level): No ACK received before timeout
[2023-02-21 23:02:09.395] [zway] Job 0x3b (Get background noise level): No ACK received before timeout
[2023-02-21 23:02:09.395] [W] [zway] Job 0x3b (Get background noise level) dropped: too many resends
[2023-02-21 23:02:09.396] [zway] Removing job: Get background noise level
After restart of z-way-server no ZWayVDev_zway_ device was created, instead the messages were printed:
[2023-02-22 08:27:37.838] [zway] Adding job: Get controller info and supported function classes
[2023-02-22 08:27:38.047] [zway] Job 0x07 (Get controller info and supported function classes): No ACK received before timeout
[2023-02-22 08:27:38.249] [zway] Job 0x07 (Get controller info and supported function classes): No ACK received before timeout
[2023-02-22 08:27:38.451] [zway] Job 0x07 (Get controller info and supported function classes): No ACK received before timeout
[2023-02-22 08:27:38.451] [W] [zway] Job 0x07 (Get controller info and supported function classes) dropped: too many resends
[2023-02-22 08:27:38.452] [C] [zway] Get Serial API Capabilities returned zero.
[2023-02-22 08:27:38.452] [zway] Removing job: Get controller info and supported function classes
[2023-02-22 08:27:38.468] [I] [core] Terminating Z-Wave binding
[2023-02-22 08:27:38.482] [I] [zway] SaveData will not save data since it wasn't loaded. This is to prevent data loss.
[2023-02-22 08:27:38.516] [I] [core] Trying to restart Z-Wave binding (zway) in 10 seconds
[2023-02-22 08:27:38.527] [I] [core] Error: Bad data - communication failed
[2023-02-22 08:27:38.528] [I] [core] Trying to restart Z-Wave binding (zway) in 10 seconds
...
[2023-02-22 08:28:13.806] [I] [core] Error: Bad data - communication failed
[2023-02-22 08:28:13.816] [I] [core] Tried 5 times without success. Stopping tries.
[2023-02-22 08:28:13.818] [I] [core] Notification: critical (z-wave): Cannot start Z-Wave binding: Error: Bad data - communication failed
after 23:00 last day, the log was flooded with the messages:
[2023-02-21 23:02:08.777] [zway] Adding job: Get background noise level
[2023-02-21 23:02:08.984] [zway] Job 0x3b (Get background noise level): No ACK received before timeout
[2023-02-21 23:02:09.189] [zway] Job 0x3b (Get background noise level): No ACK received before timeout
[2023-02-21 23:02:09.395] [zway] Job 0x3b (Get background noise level): No ACK received before timeout
[2023-02-21 23:02:09.395] [W] [zway] Job 0x3b (Get background noise level) dropped: too many resends
[2023-02-21 23:02:09.396] [zway] Removing job: Get background noise level
After restart of z-way-server no ZWayVDev_zway_ device was created, instead the messages were printed:
[2023-02-22 08:27:37.838] [zway] Adding job: Get controller info and supported function classes
[2023-02-22 08:27:38.047] [zway] Job 0x07 (Get controller info and supported function classes): No ACK received before timeout
[2023-02-22 08:27:38.249] [zway] Job 0x07 (Get controller info and supported function classes): No ACK received before timeout
[2023-02-22 08:27:38.451] [zway] Job 0x07 (Get controller info and supported function classes): No ACK received before timeout
[2023-02-22 08:27:38.451] [W] [zway] Job 0x07 (Get controller info and supported function classes) dropped: too many resends
[2023-02-22 08:27:38.452] [C] [zway] Get Serial API Capabilities returned zero.
[2023-02-22 08:27:38.452] [zway] Removing job: Get controller info and supported function classes
[2023-02-22 08:27:38.468] [I] [core] Terminating Z-Wave binding
[2023-02-22 08:27:38.482] [I] [zway] SaveData will not save data since it wasn't loaded. This is to prevent data loss.
[2023-02-22 08:27:38.516] [I] [core] Trying to restart Z-Wave binding (zway) in 10 seconds
[2023-02-22 08:27:38.527] [I] [core] Error: Bad data - communication failed
[2023-02-22 08:27:38.528] [I] [core] Trying to restart Z-Wave binding (zway) in 10 seconds
...
[2023-02-22 08:28:13.806] [I] [core] Error: Bad data - communication failed
[2023-02-22 08:28:13.816] [I] [core] Tried 5 times without success. Stopping tries.
[2023-02-22 08:28:13.818] [I] [core] Notification: critical (z-wave): Cannot start Z-Wave binding: Error: Bad data - communication failed
Raspberry Pi 3 Model B Rev 1.2
Raspbian GNU/Linux 10 (buster, 32bit)
RaZberry by Z-Wave.Me(327) ZW0700 7.21.00 07.42/1766938484 1025/257
Z-Way version v4.1.2 from 2023-10-18 03:34:26 +0300
Raspbian GNU/Linux 10 (buster, 32bit)
RaZberry by Z-Wave.Me(327) ZW0700 7.21.00 07.42/1766938484 1025/257
Z-Way version v4.1.2 from 2023-10-18 03:34:26 +0300
Re: Cannot start Z-Wave binding: Error: Bad data - communication failed
I have reinstalled my old Razberry board. Z-Way now seems to work properly again.
If nobody knows better, I will say that the board is defective. I will send it back under warranty.
The new Razberry7 Pro board worked perfectly for only 6 weeks.
If nobody knows better, I will say that the board is defective. I will send it back under warranty.
The new Razberry7 Pro board worked perfectly for only 6 weeks.
Raspberry Pi 3 Model B Rev 1.2
Raspbian GNU/Linux 10 (buster, 32bit)
RaZberry by Z-Wave.Me(327) ZW0700 7.21.00 07.42/1766938484 1025/257
Z-Way version v4.1.2 from 2023-10-18 03:34:26 +0300
Raspbian GNU/Linux 10 (buster, 32bit)
RaZberry by Z-Wave.Me(327) ZW0700 7.21.00 07.42/1766938484 1025/257
Z-Way version v4.1.2 from 2023-10-18 03:34:26 +0300
Re: Cannot start Z-Wave binding: Error: Bad data - communication failed
Is RaZ 2 working in the same place RaZ 7 is not ? Looks like a hardware fault. We can replace it for you once they are back in stock.
Re: Cannot start Z-Wave binding: Error: Bad data - communication failed
Yes, Raz7 was put on the same Raspberry on the same place as the Raz2.
That's great if you would replace it.
That's great if you would replace it.
Raspberry Pi 3 Model B Rev 1.2
Raspbian GNU/Linux 10 (buster, 32bit)
RaZberry by Z-Wave.Me(327) ZW0700 7.21.00 07.42/1766938484 1025/257
Z-Way version v4.1.2 from 2023-10-18 03:34:26 +0300
Raspbian GNU/Linux 10 (buster, 32bit)
RaZberry by Z-Wave.Me(327) ZW0700 7.21.00 07.42/1766938484 1025/257
Z-Way version v4.1.2 from 2023-10-18 03:34:26 +0300
Re: Cannot start Z-Wave binding: Error: Bad data - communication failed
Hopefully in March
-
- Posts: 3
- Joined: 28 Mar 2023 18:23
Re: Cannot start Z-Wave binding: Error: Bad data - communication failed
any update about this?Hopefully in March youtube apk
Last edited by melvinarda on 31 Mar 2023 23:21, edited 1 time in total.
Re: Cannot start Z-Wave binding: Error: Bad data - communication failed
Still waiting for the delivery. Sorry, hope in April
Re: Cannot start Z-Wave binding: Error: Bad data - communication failed
Amazon.de offers only the Razberry 7 Pro with US frequency.
When will the version with EU frequency be available?
When will the version with EU frequency be available?
Raspberry Pi 3 Model B Rev 1.2
Raspbian GNU/Linux 10 (buster, 32bit)
RaZberry by Z-Wave.Me(327) ZW0700 7.21.00 07.42/1766938484 1025/257
Z-Way version v4.1.2 from 2023-10-18 03:34:26 +0300
Raspbian GNU/Linux 10 (buster, 32bit)
RaZberry by Z-Wave.Me(327) ZW0700 7.21.00 07.42/1766938484 1025/257
Z-Way version v4.1.2 from 2023-10-18 03:34:26 +0300