@ScottR already used 'all' no update at all.
@PoltoS what is the last available update?
Razberry Pro Firmware / SDK
Re: Razberry Pro Firmware / SDK
@Thaui.
This worked for me with the latest Z-Way v4.1.1 release and was able to update to 7.38.
This worked for me with the latest Z-Way v4.1.1 release and was able to update to 7.38.
Re: Razberry Pro Firmware / SDK
@ScottR thanks for the reply. I have used z-way version 3.xx. maybe I need to update to 4.1.1. will try and give my feedback.
Re: Razberry Pro Firmware / SDK
@ScottR I updated z-way to 4.1.1 and the firmware update for the Razberry pro to 7.38 worked well. Thanks for you input
Re: Razberry Pro Firmware / SDK
Same issues. After few hours of work there are
"Error returned from _zway_cc_call_handler(zway, device->default_instance, NODE_BROADCAST, 0, data[4 + L], &data[5 + L]): Wrong packet from Z-Wave network or Discovery got bad data (stick communication failed) (-9)"
then
"Got frame from device XX to controller, but device is not registered - do re-inclusion" for non-existing devices
then devices are marked as dead...
Reboot Raspberry does nothing. Only power cycle works.
Your firmware version are worse and worse...
Re: Razberry Pro Firmware / SDK
Reverted to Razberry 2 - works without problems.
Who got problems - do the same.
EOT.
Who got problems - do the same.
EOT.
Re: Razberry Pro Firmware / SDK
I'll try my old razzberry and see how it behaves. It's a bit sad that stuff that have worked for years just stop working and then when reporting issues with logs nothing more happens.
Re: Razberry Pro Firmware / SDK
I am running 7.36 [Bootloader: 65535] and want to upgrade to 7.38. when I type 'all' in access token field I do not get the choice of 7.38, any hint?
Re: Razberry Pro Firmware / SDK
What is your hardware? It is strange that the bootloader is 65535... Please let me know the uuid of the hardware (you can see it in Z-Way Controller Info page)
Re: Razberry Pro Firmware / SDK
Razberry 7 Pro on Raspberry 4B 8GB, FW: v7.36 SDK: v7.19.2