Fibaro wallplug, Distance?

[sonnyboy]

Today when i logged in to my razberry there is a new field called "Distance", in 1 device.
Its a Fibaro wallplug
The value is 27.5 meters.

[PoltoS]

This was certailnly a corrupted RF packet from the plug. We have never seen this... you can re-interview Meter CC. Please write us if it will persist.

[pz1]

I have one of these wall plugs too. There is a problem with the interview that does not complete. The Interview results tell me that the Alarm Sensor interview seems to be the problem. Using the call http://raspberry:8083/JS/Run/zway.devices[xx] I did not find "Distance" in my device.

[sonnyboy]

"Force re interview" doesent work
I restarted my raz and the value was gone,
but today i have a velocity instead 32 m/s and a value of 28 under velocity

[sonnyboy]

There is more guys than mee that has this problem.
Do you have any suggestion what we can do??
Pictures from another user...

http://www.beyondmeasure.se/forum/index ... l#msg13271
// Sonny

[sonnyboy]

The Fibaro WallPlugs still get strange values in the UI with the new beta.

[-macke-]

I have the same problem... Here is a liste of all strange value i get from a fibaro plug... Any solution too this?

4 Device 4 Not placed in a zone Power 0.4 W 10:40 Update
4 Device 4 Not placed in a zone 2.4 Sunday 19:10 Update
4 Device 4 Not placed in a zone Velocity 149.1 m/s Sunday 19:50 Update
4 Device 4 Not placed in a zone 57.8 Sunday 19:53 Update
4 Device 4 Not placed in a zone 0.4 Tuesday 07:39 Update
4 Device 4 Not placed in a zone 0.4 Tuesday 12:07 Update
4 Device 4 Not placed in a zone 0.4 Wednesday 02:08 Update
4 Device 4 Not placed in a zone 0.3 Wednesday 05:23 Update
4 Device 4 Not placed in a zone 0.3 Wednesday 07:59 Update
4 Device 4 Not placed in a zone 0.4 Wednesday 08:49 Update
4 Device 4 Not placed in a zone 0.4 07:46 Update
4 Device 4 Not placed in a zone Voltage 0.3 V Wednesday 11:18 Update
4 Device 4 Not placed in a zone 0.4 Wednesday 11:21 Update
4 Device 4 Not placed in a zone 9 Wednesday 18:19 Update
4 Device 4 Not placed in a zone 836.6 Wednesday 18:40 Update
4 Device 4 Not placed in a zone 125.3 Wednesday 18:42 Update
4 Device 4 Not placed in a zone 0.3 04:16 Update
4 Device 4 Not placed in a zone 0.4 06:22 Update
4 Device 4 Not placed in a zone 0.3 07:16 Update
4 Device 4 Not placed in a zone 0.4 10:06 Update

[PoltoS]

Please provide us Z-Way version, h/w version (can be found in Controller Info tab) and the log (part of the log, where these values are stored to the tree - we need to see on the packet comming in).

Please turn debug on (use command line parameter "-l 0" to z-way-server)

[sonnyboy]

Z-Way version:v1.3.1
h/w version : Vendor product ID2/3 Chip:ZW0301

Debugging and log, can i have exat instructions? I´m not so familiar with linux.

[-macke-]

Z-way version: v1.4-rc1
h/w version : Vendor product ID2/3 Chip:ZW0301

Dont understand how to turn on debuggning?

This AeonLab multisensor i reset 4days ago and now all this strage value...

13 Device 13 Not placed in a zone State Triggered 07:37 Update
13 Device 13 Not placed in a zone Temperature 20.8 °C 07:37 Update
13 Device 13 Not placed in a zone Luminiscence 61 Lux 07:37 Update
13 Device 13 Not placed in a zone Humidity 62 % 07:37 Update
13 Device 13 Not placed in a zone 0 Sunday 22:15 Update
13 Device 13 Not placed in a zone 0 Monday 05:03 Update
13 Device 13 Not placed in a zone 66 Monday 05:03 Update
13 Device 13 Not placed in a zone 71.7 Monday 05:03 Update
13 Device 13 Not placed in a zone 0 Tuesday 01:44 Update
13 Device 13 Not placed in a zone 67 Tuesday 01:44 Update
13 Device 13 Not placed in a zone 69.9 Tuesday 01:44 Update
13 Device 13 Not placed in a zone 69.8 Tuesday 15:28 Update